50CrVA cold-rolled spring steel strip was used to fabricate the diaphragm of the automotive horn.The material parameters which were taken into account in the design of the dia-phragm involve elongation,elastic limit,Young's modulus,yield strength and tensile strength.The tempering process was carried out in order to enable the diaphragm to possess the excellent mechanical properties,such as high elastic limit,high fatigue strength and perfect stress relaxation resistance.As a nonlinear information processing system,the backpropagation artificial neural network (BPANN) was applied to predict and simulate the relationship between the mechanical properties of the diaphragm and the tempering process parameters.Experimental results show that a BPANN with 3-8-5 architec-ture is capable of predicting the relationship between the mechanical properties of the diaphragm and the tempering temperature successfully and lays the profound foundations for optimizing the design of the diaphragm.BPANN simulation results show that the tempering temperature ranging from 380 to 420℃ contributes to enhancing the comprehensive mechanical properties of the diaphragm including high Young's modulus,high elastic limit and high fatigue strength.
参考文献
| [1] | I. A. Basheer;M. Hajmeer .Artifical neural networks: fundamentals, computing, design, and application[J].Journal of Microbiological Methods,2000(1):3-31. |
| [2] | A. Shafyei;S.H. Mousavi Anijdan;A. Bahrami .Prediction of porosity percent in Al-Si casting alloys using ANN[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):206-210. |
| [3] | Ragip Ince .Prediction of fracture parameters of concrete by Artificial Neural Networks[J].Engineering Fracture Mechanics,2004(15):2143-2159. |
| [4] | S. Malinov;W. Sha;Z. Guo .Application of artificial neural network for prediction of time-temperature-transformation diagrams in titanium alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):1-10. |
| [5] | R. H. Wu;J. T. Liu;H. B. Chang;T. Y. Hsu;X. Y. Ruan .Prediction of the flow stress of 0.4C-1.9Cr-1.5Mn-1.0Ni-0.2Mo steel during hot deformation[J].Journal of Materials Processing Technology,2001(2/3):211-218. |
| [6] | Shashi Kumar;Sanjeev Kumar;Prakash;Ravi Shankar;M. K. Tiwari;Shashi Bhushan Kumar .Prediction of flow stress for carbon steels using recurrent self-organizing neuro fuzzy networks[J].Expert Systems with Application,2007(3):777-788. |
| [7] | K. Genel .Application of artificial neural network for predicting strain-life fatigue properties of steels on the basis of tensile tests[J].International Journal of Fatigue,2004(10):1027-1035. |
| [8] | T. Todd Pleune;Omesh K. Chopra .Using artificial neural networks to predict the fatigue life of carbon and low-alloy steels[J].Nuclear engineering and design,2000(1/2):1-12. |
| [9] | Mohammed E. Haque;K.V. Sudhakar .ANN back-propagation prediction model for fracture toughness in microalloy steel[J].International Journal of Fatigue,2002(9):1003-1010. |
| [10] | S. Malinov;W. Sha .Application of artificial neural networks for modelling correlations in titanium alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):202-211. |
| [11] | A. Downes;R Hartley .Using an artificial neural network to assist roll design in cold roll-forming processes[J].Journal of Materials Processing Technology,2006(1/3):319-322. |
| [12] | Jamal Sheikh-Ahmad;Janet Twomey .ANN constitutive model for high strain-rate deformation of Al 7075-T6[J].Journal of Materials Processing Technology,2007(1/3):339-345. |
| [13] | 江树勇,李萍,薛克敏.Application of BPANN in spinning deformation of thin-walled tubular parts with longitudinal inner ribs[J].中南工业大学学报(英文版),2004(01):27-30. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%