The quantitative determination of the mass fractions of precipitates in steels is very difficult using traditional materials characterization techniques.The Rietveld full-pattern fitting algo-rithm was introduced to solve this problem.The precipitated multicomponents'mass fraction of M_3C,MC,M_7C_3 and M_(23)C_6 were evaluated precisely and relatively quickly.It is found evolution of carbides apparently occurs during tempering at high temperatures,and a two-step transformation mechanism is proposed for M_7C_3 during early tempering treatment.The method is an effective way on the investi-gation of precipitation kinetics,which may play a promising role in propertities'enhancement and design of the heat-resistant steels.
参考文献
| [1] | Janovec J;Svoboda M;Kroupa A;Vyrostkova A .Thermal-induced evolution of secondary phases in Cr-Mo-V low alloy steels[J].Journal of Materials Science,2006(11):3425-3433. |
| [2] | H. K. D. H. BHADESHIA .Design of Ferritic Creep-resistant Steels[J].ISIJ International,2001(6):626-640. |
| [3] | G. D. Pigrova .EFFECT OF LONG-TERM OPERATION ON CARBIDE PHASES IN Cr-Mo-V STEELS[J].Metal Science and Heat Treatment,2003(3/4):84-87. |
| [4] | Kouichi MARUYAMA;Kota SAWADA;Jun-ichi KOIKE .Strengthening Mechanisms of Creep Resistant Tempered Martensitic Steel[J].ISIJ International,2001(6):641-653. |
| [5] | Abe F .Bainitic and martensitic creep-resistant steels[J].Current opinion in solid state & materials science,2004(3/4):305-311. |
| [6] | Fei Yan;Haisheng Shi;Junfei Fan .An investigation of secondary carbides in the spray-formed high alloyed Vanadis 4 steel during tempering[J].Materials Characterization,2008(7):883-889. |
| [7] | K. Kaneko;S. Matsumura;A. Sadakata .Characterization of carbides at different boundaries of 9Cr-steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):82-89. |
| [8] | C. WU;V. SAHAJWALLA;P. KRAUKLIS .The Effect of Austenitizing Process on the Hardening Behaviour of Cr-Mo-Mn-C Air-hardening Cast Tool Steel[J].ISIJ International,1996(3):347-353. |
| [9] | Fei Yan;Haisheng Shi;Bingzhong Jin .Microstructure evolution during hot rolling and heat treatment of the spray formed Vanadis 4 cold work steel[J].Materials Characterization,2008(8):1007-1014. |
| [10] | Nong WAN,Weihao XIONG,Jinping SUO.Mathematical Model for Tempering Time Effect on Quenched Steel Based on Hollomon Parameter[J].材料科学技术学报（英文版）,2005(06):803-806. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%