New Mg2Si based alloy were prepared by mechanical alloying.Sintering temperature was from 825 to 865K,which indicated that few Mg2Si were produced at lower temperature while MgO were produced at higher temperature.Microstructure image showed that at sintering temperature of 855K,Mg2Si were mostly synthesized with the reaction of purity magnesia powder and silicon powder.Hardness and wear tests proved that the new synthetic silicon magnesium alloy had higher hardness and good wear resistance.Under the same testing conditions,it is found that the hardness of the new material is 420.50,and pure magnesium is only 41.65.In the same experiments it is also found that under the same pressure,pure magnesium alloys than silicon wearing capacity of pure magnesium is 2 times as high that of Mg2Si based alloy.It shows that Mg2Si based alloy is the ideal material for the wear parts of car engine cylinder liner because of its small density,stable dimension,high hardness and wear-resisting.
参考文献
| [1] | Yoshinaga M;Iida T;Noda M;Endo I;Takanashi Y .Bulk crystal growthOf Mg2Si by the vertical Bridgman method[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2004(1):86-89. |
| [2] | H. Tatsuoka;N. Takagi;S. Okaya;Y. Sato;T. Inaba;T. Ohishi;A. Yamamoto;T. Matsuyama;H. Kuwabara .Microstructures of semiconducting silicide layers grown by novel growth techniques[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2004(1):57-62. |
| [3] | Arnaud B.;Alouani M. .Electron-hole excitations in Mg2Si and Mg2Ge compounds - art. no. 033202[J].Physical Review.B.Condensed Matter,2001(3):3202-0. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%