Microstructures and Properties of 550 MPa Grade High Strength Thin-walled H-beam Steel

武汉理工大学学报-材料科学版(英文版), 2013, 28(6): 1217-1222. doi: 10.1007/s11595-013-0848-5

^1, , ^2, , ^3, , ^4, , ^5,

1.School of Materials Science and Engineering, Key Lab of Metals and Processing of Anhui Province, Anhui University of Technology,Ma'anshan 243002, China

2.School of Materials Science and Engineering, State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing, Beijing 100083, China

3.School of Materials Science and Engineering, Key Lab of Metals and Processing of Anhui Province, Anhui University of Technology,Ma'anshan 243002, China

4.School of Materials Science and Engineering, Key Lab of Metals and Processing of Anhui Province, Anhui University of Technology,Ma'anshan 243002, China

5.Ma'anshan Iron and Steel Co.Ltd, Ma'anshan 243005, China

基金项目: the "11th Five" National Science and Technology Support Project (2006BAE03A13)

Microstructures and Properties of 550 MPa Grade High Strength Thin-walled H-beam Steel

CHEN Jiping ^1, , KANG Yonglin ^2, , QIAN Jianqing ^3, , LI Shengzhi ^4, , QIAN Haifan ^5,

1.School of Materials Science and Engineering, Key Lab of Metals and Processing of Anhui Province, Anhui University of Technology,Ma'anshan 243002, China

2.School of Materials Science and Engineering, State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing, Beijing 100083, China

3.School of Materials Science and Engineering, Key Lab of Metals and Processing of Anhui Province, Anhui University of Technology,Ma'anshan 243002, China

4.School of Materials Science and Engineering, Key Lab of Metals and Processing of Anhui Province, Anhui University of Technology,Ma'anshan 243002, China

5.Ma'anshan Iron and Steel Co.Ltd, Ma'anshan 243005, China

Keywords： H-beam steel

参考文献

[1]	李冬林,游颖,李欢.高频焊接轻型H型钢自动化生产线的设计[J].机床与液压,2011(20):1-3,8.
[2]	钱健清,申斌,吴保桥,吴结才.高强低碳H型钢的开发[J].热加工工艺,2010(08):62-63.
[3]	姜辉,黄贞益,尹桂全,郑建平,王萍,程鼎,张文满.高强度厚壁H型钢粗轧工艺对组织性能的影响[J].上海金属,2009(03):40-44.
[4]	程鼎,潘涛,张永权,王恩睿.V-N微合金化厚壁H型钢的组织、力学性能及析出物研究[J].钢铁钒钛,2008(03):1-6.
[5]	程鼎,张永权,杨才福.钒氮合金在高强度H型钢中的应用[J].钢铁,2008(06):97-100.
[6]	尹桂全,尹云洋,王世俊,田海林,程坚平,程晓舫.微合金V-N钢轧制工艺与显微组织[J].金属热处理,2005(11):43-46.
[7]	于庆波,赵贤平,孙斌,于爱民,陈波.高层建筑用钢板的屈强比[J].钢铁,2007(11):74-78,16.
[8]	潘国平,宋强,喻能利,闻玉胜.按美标生产出口H型钢的质量控制[J].钢铁,2002(08):33-36.
[9]	YANG Cai-fu;WANG Quan-li .Research, Development, and Production of V-N Microalloyed High Strength Rebars for Building in China[J].Journal of iron and steel research,2008(2):81-86.
[10]	王萍,尹桂全,郑建平,姜辉,黄贞益,程鼎,张文满,吴结才.H型钢轧后回火组织与性能研究[J].热处理,2009(03):35-39.
[11]	冯建晖,张辉宜,钱奕峰,徐光元.H型钢控制冷却的试验研究[J].钢铁钒钛,2003(03):1-5.
[12]	郭娟,吴迪,赵宪明,贾玉萍.H型钢轧后控制冷却的研究与应用[J].钢铁研究学报,2007(05):40-43.
[13]	孙邦明,季怀忠,杨才福,张永权.V-N微合金化钢筋中钒的析出行为[J].钢铁,2001(02):44-47.
[14]	尹桂全,黄贞益,姜辉,郑建平,王萍,程晓舫,程坚平,张文满.高强度厚壁H型钢轧后快冷组织及性能[J].金属热处理,2010(05):69-74.
[15]	杨才福,张永权,柳书平.钒、氮微合金化钢筋的强化机制[J].钢铁,2001(05):55-57,78.
[16]	尹桂全,黄贞益,杨才福,方芳,姜辉,郑建平,程坚平,程晓舫,陈斌.氮含量和TMCP对微合金V-N钢显微组织和力学性能的影响[J].金属热处理,2008(03):4-8.
[17]	Kai WANG,Lijun WANG,Wenfang CUI,Chunming LIU.Effect of V and V-N Microalloying on Deformation-Induced Ferrite Transformation in Low Carbon Steels[J].材料科学技术学报（英文版）,2006(02):159-163.

上一张下一张

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
在百度学术搜索
在万方数据库搜索
在CNKI搜索

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%