Nickel-coated 45 steel studs and 6061 aluminum alloy with 4047 Al alloy foil asfi ller metal were joined by using high frequency induction brazing. The microstructure of Fe/Al brazed joint was studied by means of optical microscopy (OM), scanning electron microscope (SEM), energy dispersive X-ray (EDX), and X-ray diffraction (XRD). Results showed that 45 steel stud and 6061 aluminum alloy could be successfully joined by high frequency induction brazing with proper processing parameters. The bonding strength of the joint was of the order of 88 MPa. Ni coating on steel stud successfully avoided the generation of Fe-Al intermetallic compound which is brittle by blocking the contact between Al and Fe. Intermetallic compounds, i e,Al3Ni2, Al1.1Ni0.9 and Al0.3Fe3Si0.7 presented in Al side, FeNi and Fe-Al-Ni ternary eutectic structure were formed in Fe side. The micro-hardness in intermetallic compound layer was 313 HV. The joint was brittle fractured in the intermetallic compounds layer of Al side, where plenty of Al3Ni2 intermetallic compounds were distributed continuously.
参考文献
| [1] | Emel Taban;Jerry E. Gould;John C. Lippold .Dissimilar friction welding of 6061-T6 aluminum and AISI 1018 steel: Properties and microstructural characterization[J].Materials & design,2010(5):2305. |
| [2] | M. Soltan Ali Nezhad;A. Haerian Ardakani .A Study Of Joint Quality Of Aluminum And Low Carbon Steel Strips By Warm Rolling[J].Materials & design,2009(4):1103-1109. |
| [3] | S. D. Kore;P. P. Date;S. V. Kulkarni .Electromagnetic impact welding of aluminum to stainless steel sheets[J].Journal of Materials Processing Technology,2008(1/3):486-493. |
| [4] | 殷浩澍.螺柱焊在船厂的应用[J].电焊机,2006(01):19-22. |
| [5] | 石常亮,何鹏,冯吉才,张洪涛.铝/镀锌钢板CMT熔钎焊界面区组织与接头性能[J].焊接学报,2006(12):61-64. |
| [6] | Rattana Borrisutthekul;Taisei Yachi;Yukio Miyashita;Yoshiharu Mutoh .Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):108-113. |
| [7] | Takehiko Watanabe;Hirofumi Takayama;Atsushi Yanagisawa .Joining of aluminum alloy to steel by friction stir welding[J].Journal of Materials Processing Technology,2006(1/3):342-349. |
| [8] | 吴铭方,司乃潮,陈健.铝合金/Cu/不锈钢接触反应钎焊及中间层溶解行为[J].中国有色金属学报（英文版）,2011(05):1035-1039. |
| [9] | Alaa Muhsin Saeed;Zuhailawati Hussain;Ahmad Badri;Tadashi Ariga .The effects of welding parameters on the weldability of different materials using brazing alloy fillers[J].Materials & design,2010(7):p.3339. |
| [10] | Zhu, M.-L.;Xuan, F.-Z. .Correlation between microstructure, hardness and strength in HAZ of dissimilar welds of rotor steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(16/17):4035-4042. |
| [11] | Liming Liu;Xujing Liu;Shunhua Liu .Microstructure of laser-TIG hybrid welds of dissimilar Mg alloy and Al alloy with Ce as interlayer[J].Scripta materialia,2006(4):383-386. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%