Fe-based amorphous and nanocrystalline coatings were fabricated by air plasma spraying. The coatings were further treated by laser remelting process to improve their microstructure and properties. The corrosion resistance of the as-sprayed and laser-remelted coatings in 3.5wt% NaCl and 1 mol/L HCl solutions was evaluated by electrochemical polarization analysis. It was found that laser-remelted coating appeared much denser than the as-sprayed coating. However, laser-remelted coating contains much more nanocrystalline grains than the as-sprayed coatings, resulting from the lower cooling rate in laser remelting process compared with plasma spraying process. Electrochemical polarization results indicated that the laser-remelted coating has great corrosion resistance than the as-sprayed coating because of its dense structure.
参考文献
[1] | Inoue, Shen B;Nishiyama N.Bulk Metallic Glasses[M].Springer-Verlag,2008:1-25. |
[2] | Akihisa Inoue;Baolone Shen;Akira Takeuchi .Developments and Applications of Bulk Glassy Alloys in Late Transition Metal Base System[J].Materials transactions,2006(5):1275-1285. |
[3] | Singh A;Bakshi S;Agarwal A et al.Microstructure and Tribological Behavior of Spark Plasma Sintered Iron-based Amorphous Coatings[J].Mater Sci Eng A,2010,527:5000-5007. |
[4] | Nicolas S;Francoise H;Sophie C et al.Corrosion Properties ofin Situ Laser Remelted NiCrBSi Coatings Comparison with Hard Chromium Coatings[J].Journal of Materials Processing Technology,2011,211:133-140. |
[5] | Basu A;Sarnant AN;Harirnkar SP et al.Laser Surface Coating of Fe-Cr-Mo-Y-B-C Bulk Metallic Glass Composition on AISI 4041 Steel[J].Surface and Coatings Technology,2008,202:2623-2631. |
[6] | Guo RQ;Zhang C;Chen Q et al.Study of Structure and Corrosion Resistance of Fe-based Amorphous Coatings Prepared by HVAF and HVOF[J].Corrosion Science,2011,53:2351-2356. |
[7] | Sanghoon Yoon;Gyuyeol Bae;Yuming Xiong .Strain-enhanced nanocrystallization of a CuNiTiZr bulk metallic glass coating by a kinetic spraying process[J].Acta materialia,2009(20):6191-6199. |
[8] | Huang YJ;Guo YZ;Fan HB et al.Synthesis of Fe-Cr-Mo-C-B Amorphous Coating with High Corrosion Resistance[J].Materials Letters,2012,89:229-232. |
[9] | Zhou Z;Wang L;Wang FC et al.Formation and Corrosion Behavior of Fe-based Amorphous Metallic Coatings by HVOF Thermal Spraying[J].Surface and Coatings Technology,2009,204:563-570. |
[10] | Wang Y;Zheng YG;Ke W et al.Slurry Erosion-corrosion Behaviour of High-velocity Oxy-fuel(HVOF)Sprayed Fe-based Amorphous Metallic Coatings for Marine Pump in Sand-containing NaCl Solutions[J].Corrosion Science,2011,53:3177-3185. |
[11] | Zhang PL;Yan H;Yao CW et al.Synthesis of Fe-Ni-B-Si-Nb Amorphous and Crystalline Composite Coatings by Laser Cladding and Remelting[J].Surface and Coatings Technology,2011,206:1229-1236. |
[12] | Shen BL;Chang CT;Inoue A .Ni-based Bulk Glassy Alloys with Superhigh Strength of 3800 MPa in Ni-Fe-B-Si-Nb System[J].Applied Physics Letters,2006,88:201903-201906. |
[13] | Li RF;Li ZG;Huang J et al.Dilution Effect on the Formation of Amorphous Phase in the Laser Cladded Ni-Fe-B-Si-Nb Coatings after Laser Remelting Process[J].Applied Surface Sinence,2012,258:7956-7961. |
[14] | Zhu YY;Li ZG;Huang J et al.Amorphous Structure Evolution of High Power Diode Laser Cladded Fe-Co-B-Si-Nb Coatings[J].Applied Surface Sinence,2012,261:896-901. |
[15] | Wu XL.;Hong YS. .Fe-based thick amorphous-alloy coating by laser cladding[J].Surface & Coatings Technology,2001(2/3):141-144. |
[16] | Jiang CP;Xing YZ;Zhang FY et al.Microstructure and Corrosion Resistance of Fe/Mo Composite Amorphous Coatings Prepared by Air Plasma Spraying[J].Int J Mine Mater,2012,19:657-662. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%