Effect of electrolyte temperature on the nano-carbonitride layer fabricated by surface nanocrystallization and plasma treatment on a γ-TiAl alloy

稀有金属（英文版）, 2009, 28(5): 454-459. doi: 10.1007/s12598-009-0088-1

^1, , ^2, , ^3,

1.Department of Materials Engineering, Faculty of Engineering, Tarbiat Modares University, P.O. Box: 14115-143, Tehran, Iran

2.Department of Materials Engineering, Faculty of Engineering, Tarbiat Modares University, P.O. Box: 14115-143, Tehran, Iran

3.Department of Materials Engineering, Faculty of Engineering, Tarbiat Modares University, P.O. Box: 14115-143, Tehran, Iran

Effect of electrolyte temperature on the nano-carbonitride layer fabricated by surface nanocrystallization and plasma treatment on a γ-TiAl alloy

M. Aliofkhazraei ^1, , A. Sabour Rouhaghdam ^2, , H. Hassannejad ^3,

1.Department of Materials Engineering, Faculty of Engineering, Tarbiat Modares University, P.O. Box: 14115-143, Tehran, Iran

2.Department of Materials Engineering, Faculty of Engineering, Tarbiat Modares University, P.O. Box: 14115-143, Tehran, Iran

3.Department of Materials Engineering, Faculty of Engineering, Tarbiat Modares University, P.O. Box: 14115-143, Tehran, Iran

Keywords： carbonitride

The distribution of nano-carbonitrides produced by the treatments of surface nanocrystallization and plasma electrolytic carbonitriding on a γ-TiAl was investigated by means of figure analysis. The skewness and kurtosis of Gaussian shape distribution curves were studied and the effect of electrolyte temperature was determined. The usage of lower temperatures of the electrolyte is more suitable for achieving lower sizes of complex nano-carbonitrides. The surface roughness of treated samples was measured and it was observed that there is an optimum level of electrolyte temperature for surface roughness increase (difference between two measured data).

参考文献

[1]	Nie X.;Wilson A.;Yerokhin AL.;Leyland A.;Matthews A.;Tsotsos C. .Characteristics of a plasma electrolytic nitrocarburising treatment for stainless steels[J].Surface & Coatings Technology,2001(2/3):135-142.
[2]	Aliofkhazraei M;Mofidi S H H;Sabour Rouhaghdam A;Mohsenian E .Duplex surface treatment of pre-electroplating and pulsed nanocrystalline plasma electrolytic carbonitriding of mild steel[J].Journal of Thermal Spray Technology,2008,17:323.
[3]	Tarakci M;Korkmaz K;Gencer Y;Usta M .Plasma electrolytic surface carburizing and hardening of pure iron[J].Surface & Coatings Technology,2005(2/3):205-212.
[4]	M. Aliofkhazraei;A. Sabour Rouhaghdam;A. Heydarzadeh .Strong relation between corrosion resistance and nanostructure of compound layer of treated 316 austenitic stainless steel[J].Materials Characterization,2009(2):83-89.
[5]	Lu K;Lu J .Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,375-377:38.
[6]	Lu K .Nanocrystalline metals crystallized from amorphous solids:nanocrystallization,structure,and properties[J].Materials Science and Engineering R:Reports,1996,16:161.
[7]	Aliofkhazraei M;Roohaghdam AS .A novel method for preparing aluminum diffusion coating by nanocrystalline plasma electrolysis[J].Electrochemistry communications,2007(11):2686-2691.

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
在百度学术搜索
在万方数据库搜索
在CNKI搜索

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

Effect of electrolyte temperature on the nano-carbonitride layer fabricated by surface nanocrystallization and plasma treatment on a γ-TiAl alloy

参考文献