欢迎登录材料期刊网

材料期刊网

高级检索

The effects of differential speed rolling (DSR) on the texture of AZ31B magnesium alloy sheets were investigated,which were achieved by tailoring deformation temperature,reduction,and speed ratio.The results show that the intensity of basal texture weakens with DSR.With the increase of the rolling temperature,the intensity of basal texture decreased first and then increased,which had a relation with the change of the orientation of the new grains of dynamic recrystallization during rolling.The effect of the reduction on the basal texture was made with the changing degree of sharp point of texture.With increasing the deformation at the same rolling temperature,the intensity of basal texture decreased,and the extending of contour lines decreased in the transverse direction,which was close to the circular distribution.Differential speed ratio has a greater impact on the intensity of the basal texture and has a less effect on the basal deflection.

参考文献

[1] Chen Z.H.Wrought Magnesium Alloy[M].The Press of Chemic Industry,Beijing,2005:6.
[2] 赵辉,彭晓东,王艳光,杨艳,魏群义.变形镁合金的塑性改善研究现状[J].稀有金属,2012(01):161-166.
[3] 丁茹,王伯健,任晨辉,刘长瑞.异步轧制AZ31镁合金板材的晶粒细化及性能[J].稀有金属,2010(01):34-37.
[4] Zhang S.M;Yang B.C;Xun J;Shi L.K Chen G.L .Effects of deformation parameters on microstructure and mechanical properties of magnesium alloy AZ31B[J].Rare Metals,2006,25:105.
[5] W.J. Kim;S.I. Hong;Y.S. Kim .Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing[J].Acta materialia,2003(11):3293-3307.
[6] Kim K.H;Seo Y.M;Yim C.D .The effect of rolling conditions on the microstructure and texture evolution of AZ31 Mg alloy sheets[J].Materials Forum,2005,29:530.
[7] Mukai T.;Watanabe H. .Grain Refinement of Commercial Magnesium Alloys for High-strain-rate-superplastic Forming[J].Materials Science Forum,2000(0):159-170.
[8] WANG Shouren,WANG Min,MA Ru,WANG Yong,WANG Yanjun.Microstructure and hot compression behavior of twin-roll-casting AZ41M magnesium alloy[J].稀有金属(英文版),2010(04):396-400.
[9] LEE Shyong,CHIANG Chihte,LEU Jyhshyan,CHEN Yunghung.Superplastic elongation characteristic of fine grained magnesium alloy ZK60[J].稀有金属(英文版),2010(04):421-425.
[10] LI Yongjun,ZHANG Kui,ZHANG Ya,LI Xinggang,MA Minglong.Microstructural evolution and mechanical properties of Mg-5Y-5Gd-xNd-0.5Zr magnesium alloys at different states[J].稀有金属(英文版),2010(03):317-322.
[11] ZHANG Kui,MA Minglong,LI Xinggang,LI Yongjun,LIANG Lichao,BING Mengfen.Hot deformation behavior of Mg-7.22Gd-4.84Y-1.26Nd-0.58Zr magnesium alloy[J].稀有金属(英文版),2011(01):87-93.
[12] Watanabe H;Mukai T;Ishikawa K .Differential speed rolling of an AZ31 magnesium alloy and the resulting mechanical properties[J].Journal of Materials Science,2004,39:1477.
[13] Yu Yoshida;Lawrence Cisar;Shigeharu Kamado .Effect of Microstructural Factors on Tensile Properties of an ECAE-Processed AZ31 Magnesium Alloy[J].Materials transactions,2003(4):468-475.
[14] Hiroyuki Watanabe;Akira Takara;Hidetoshi Somekawa .Effect of Texture on Tensile Properties at Elevated Temperatures in an AZ31 Magnesium Alloy[J].Scripta materialia,2005(6):449-454.
[15] 汪凌云,范永革,黄光杰,黄光胜,潘复生,刘正宏.AZ31B镁合金板材的织构[J].材料研究学报,2004(05):466-470.
[16] Chino Y;Lee J.S;Sassa K .Press formability of a rolled AZ31 Mg alloy sheet with controlled texture[J].Materials Letters,2006,60:173.
[17] Xinsheng Huang;Kazutaka Suzuki;Naobumi Saito .Textures and stretch formability of Mg-6Al-1Zn magnesium alloy sheets rolled at high temperatures up to 793 K[J].Scripta materialia,2009(8):651-654.
[18] Pan F.S;Han E.H.High Performance Deforming Magnesium Alloy and Processing Technology[M].北京:科学出版社,2007:176.
[19] Zhang W.Y;Liu X.L;Chen Z.H .The microstructure and grain orientation of the asynchronous rolled AZ31 magnesium alloy sheet[J].Mechanical Engineering Materials,2007,31(12):19.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%