参考文献
| [1] | Nixon, ME;Cazacu, O;Lebensohn, RA .Anisotropic response of high-purity alpha-titanium: Experimental characterization and constitutive modeling[J].International Journal of Plasticity,2010(4):516-532. |
| [2] | LI Yan,YU Kaiyuan,SONG Xiaoyun,ZHANG Fei.Effect of Zr addition on microstructures and mechanical properties of Ni-46Ti-4Al alloy[J].稀有金属（英文版）,2011(05):522-526. |
| [3] | Chen FK;Chiu KH .Stamping formability of pure titanium sheets[J].Journal of Materials Processing Technology,2005,170(1-2):181. |
| [4] | Zhu ZS.;Yan MG.;Cao CX.;Gu JL.;Chen NP.;Liu RY. .TEXTURE CONTROL AND THE ANISOTROPY OF MECHANICAL PROPERTIES IN TITANIUM SHEET[J].Journal of Materials Science,1997(19):5163-5167. |
| [5] | Hill R .A theory of the yielding and plastic flow of anisotropic metals[J].Proceedings of the Royal Society A:Mathematical,Physical & Engineering Sciences,1948,193(1033):281. |
| [6] | Hosford WF .Generalized isotropic yield criterion[J].J Appl Mech (Trans ASME),1972,39(02):607. |
| [7] | Bassani JL .Yield characterization of metals with transversely isotropic plastic properties[J].International Journal of Mechanical Sciences,1977,19(11):651. |
| [8] | Gotoh M .Theory of plastic anisotropy based on a yield function of fourth order (plane stress state)[J].International Journal of Mechanical Sciences,1977,19(09):505. |
| [9] | Logan RW;Hosford WF .Upper-bound anisotropic yield locus calculations assuming left angle bracket 111 right angle bracket pencil glide[J].International Journal of Mechanical Sciences,1980,22(07):419. |
| [10] | Budiansky B.Anisotropic plasticity of plane-isotropic sheets[A].Amsterdam:Elsevier Science,1984:1. |
| [11] | Barlat F;Lian J .Plastic behavior and stretchability of sheet metals part Ⅰ:a yield function for orthotropic sheets under plane stress conditions[J].International Journal of Plasticity,1989,5(01):51. |
| [12] | Barlat F;Daniel JL;John CB .A six-component yield function for anisotropic materials[J].International Journal of Plasticity,1991,7(07):693. |
| [13] | Barlat F;Chung K .Anisotropic potentials for plastically deforming metals[J].Modelling & Simulation in Materials Science and Engineering,1993,1(04):403. |
| [14] | Barlat F.;Hayashida Y.;Maeda Y.;Yanagawa M.;Chung K.;Brem JC.;Lege DJ.;Matsui K.;Murtha SJ.;Hattori S.;Becker RC. .YIELDING DESCRIPTION FOR SOLUTION STRENGTHENED ALUMINUM ALLOYS[J].International Journal of Plasticity,1997(4):385-401. |
| [15] | Barlat F.;Brem JC.;Yoon JW.;Chung K.;Dick RE.;Lege DJ.;Pourgoghrat F.;Choi SH.;Chu E. .Plane stress yield function for aluminum alloy sheets - part 1: theory[J].International Journal of Plasticity,2003(9):1297-1319. |
| [16] | Wang ZJ;Song H .Effect of electropulsing on anisotropy behaviour of cold-rolled commercially pure titanium sheet[J].Transactions of Nonferrous Metals Society of China,2009,19(s):409. |
| [17] | Nasiri-Abarbekoh H;Ekrami A;Ziaei-Moayyed AA;Shohani M .Effects of rolling reduction on mechanical properties anisotropy of commercially pure titanium[J].Materials & Design,2012,34:268. |
| [18] | Serebryany VN;Fundenberger JJ;Mel'nikov KE.Plastic anisotropy of textured titanium sheets[A].Metz,France,2008:23. |
| [19] | A. Le Port;F. Toussaint;R. Arrieux .Finite element study and sensitive analysis of the deep-drawing formability of commercially pure titanium[J].International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM,2009(2):121-129. |
| [20] | P.-A. Eggertsen;K. Mattiasson .On constitutive modeling for springback analysis[J].International Journal of Mechanical Sciences,2010(6):804-818. |
| [21] | Guo W;Zhou F;Chen JW;Lian JS .The experimental study of Ti sheet by using the F.Barlat-Lian yield criterion[J].J Jilin Univ Technol,1993,23(01):36. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%