Bake-Hardening Response of High Martensite Dual-Phase Steel with Different Morphologies and Volume Fractions

金属学报(英文版), 2014, 27(2): 279-289. doi: 10.1007/s40195-014-0043-5

^1, , ^2,

1.Department of Metallurgy, Kocaeli University Hereke Vocational School, Kocaeli, Turkey

2.Department of Manufacturing Engineering, Technology Faculty,Karabük University, Karabük, Turkey

Bake-Hardening Response of High Martensite Dual-Phase Steel with Different Morphologies and Volume Fractions

Mustafa Türkmen ^1, , Süleyman Gündüz ^2,

1.Department of Metallurgy, Kocaeli University Hereke Vocational School, Kocaeli, Turkey

2.Department of Manufacturing Engineering, Technology Faculty,Karabük University, Karabük, Turkey

Keywords： Dual-phase steel

参考文献

[1]	J. Kadkhodapour;A. Butz;S. Ziaei Rad .Mechanisms of void formation during tensile testing in a commercial, dual-phase steel[J].Acta materialia,2011(7):2575-2588.
[2]	B. -C. Hwang;T. -Y. Cao;S. Y. Shin .Effects of ferrite grain size and martensite volume fraction on dynamic deformation behaviour of 0.15C-2.0Mn-0.2Si dual phase steels[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2005(8):967-975.
[3]	G. Avramovic-Cingara;Y. Ososkov;M.K. Jain;D.S. Wilkinson .Effect of martensite distribution on damage behaviour in DP600 dual phase steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):7-16.
[4]	R. SOTO;W. SAIKALY;X. BANO .STATISTICAL AND THEORETICAL ANALYSIS OF PRECIPITATES IN DUAL-PHASE STEELS MICROALLOYED WITH TITANIUM AND THEIR EFFECT ON MECHANICAL PROPERTIES[J].Acta materialia,1999(12):3475-3481.
[5]	Z. G. WANG;S. H. Al .Fatigue of Martensite-Ferrite High Strength Low-alloy Dual Phase Steels[J].ISIJ International,1999(8):747-759.
[6]	A.Bag;K.K.Ray .Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1999(5):1193-1202.
[7]	T. WATERSCHOOT;K. VERBEKEN;B. C. DE COOMAN .Tempering kinetics of the martensitic phase in DP steel[J].ISIJ International,2006(1):138-146.
[8]	R.O. Rocha;T.M.F. Melo;E.V. Pereloma .Microstructural evolution at the initial stages of continuous annealing of cold rolled dual-phase steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):296-304.
[9]	A. J. Abdalla;L. R. O. Hein;M. S. Pereira;T. M. Hashimoto .Mechanical behaviour of strain aged dual phase steels[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1999(10):1167-1170.
[10]	M.J. Molaei;A. Ekrami .The effect of dynamic strain aging on fatigue properties of dual phasesteels with different martensite morphology[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):235-238.

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
在百度学术搜索
在万方数据库搜索
在CNKI搜索

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

Bake-Hardening Response of High Martensite Dual-Phase Steel with Different Morphologies and Volume Fractions

参考文献