参考文献
[1] | S.K.Maloney;K.Hono .The chemistry of precipitates in an aged Al-2.1Zn- 1.7Mg at. percent alloy[J].Scripta materialia,1999(10):1031-1038. |
[2] | J.Z. Liu;J.H. Chen;X.B. Yang;S. Ren;C.L. Wu;H.Y. Xu;J. Zou .Revisiting the precipitation sequence in Al–Zn–Mg-based alloys by high-resolution transmission electron microscopy[J].Scripta materialia,2010(11):1061-1064. |
[3] | T. Marlaud;A. Deschamps;F. Bley .Influence of alloy composition and heat treatment on precipitate composition in Al-Zn-Mg-Cu alloys[J].Acta materialia,2010(1):248-260. |
[4] | T. Marlaud;B. Malki;C. Henon;A. Deschamps;B. Baroux .Relationship between alloy composition, microstructure and exfoliation corrosion in Al-Zn-Mg-Cu alloys[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2011(10):3139-3149. |
[5] | K. Stiller;P.J. Wdrren .Investigation of precipitation in an Al-Zn-Mg alloy after two-step ageing treatment at 100°and 150℃[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(1):55-63. |
[6] | P. GUYOT;L. COTTIGNIES .PRECIPITATION KINETICS, MECHANICAL STRENGTH AND ELECTRICAL CONDUCTIVITY OF AlZnMgCu ALLOYS[J].Acta materialia,1996(10):4161-4167. |
[7] | J.F. Nie .Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys[J].Scripta materialia,2003(8):1009-1015. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%