To explore the coupled effect of temperature T and strain rate ε˙ε˙ on the deformation features of AZ31 Mg alloy, mechanical behaviors and microstructural evolutions as well as surface deformation and damage features were systematically examined under uniaxial tension at T spanning from 298 to 523 K and ε˙ε˙ from 10-4 to 10-2 s-1. The increase in T or the decrease in ε˙ε˙ leads to the marked decrease in flow stress, the appearance of a stress quasi-plateau after an initially rapid strain hardening, and even to the occurrence of successive strain softening. Correspondingly, the plastic deformation modes of AZ31 Mg alloy transform from the predominant twinning and a limited amount of dislocation slip into the enhanced non-basal slip and the dynamic recrystallization (DRX) together with the weakened twinning. Meanwhile, the cracking modes also change from along grain boundaries (GBs) and at twin boundaries (TBs) or the end of twins into nearby GBs where the DRX has occurred. The appearance of a stress quasi-plateau, the formation of large-sized cracks nearby GBs, and the occurrence of continuous strain softening, are intimately related to the enhancement of the non-basal slip and the DRX.
参考文献
| [1] | B.L. Mordike, T. Ebert, Mater. Sci. Eng. A 302, 37 (2001) |
| [2] | F. Li, X. Zeng, N. Bian, Mater. Lett. 135, 79 (2014) |
| [3] | H. Zhang, Y. Yan, J.F. Fan, W.L. Cheng, H.J. Roven, B.S. Xu,H.B. Dong, Mater. Sci. Eng. A 618, 540 (2014) |
| [4] | H. Zhang, G.S. Huang, J.H. Li, L.F. Wang, H.J. Roven, J. Alloys Compd. 563, 150 (2013) |
| [5] | X. Shang, J. Zhou, X. Wang, Y. Luo, J. Alloys Compd. 629, 155 (2015) |
| [6] | J. Deng, Y.C. Lin, S.S. Li, J. Chen, Y. Ding, Mater. Des. 49, 209 (2013) |
| [7] | E. Karimi, A. Zarei-Hanzaki, M.H. Pishbin, H.R. Abedi, P.Changizian, Mater. Des. 49, 173 (2013) |
| [8] | G. Bajargan, G. Singh, D. Sivakumar, U. Ramamurty, Mater.Sci. Eng. A 579, 26 (2013) |
| [9] | Y. Koh, D. Kim, D.Y. Seok, J. Bak, S.W. Kim, Y.S. Lee, K.Chung, Inter. J. Mech. Sci. 93, 204 (2015) |
| [10] | J.W. Liu, Z.H. Chen, D. Chen, G.F. Li, Trans. Nonferrous Met.Soc. China 22, 1329 (2012) |
| [11] | F. Berge, L. Kru¨ger, H. Ouaziz, C. Ullrich, Trans. NonferrousMet. Soc. China 25, 1 (2015) |
| [12] | I. Ulacia, N.V. Dudamell, F. Ga´lvez, S. Yi, M.T. Pe´rez-Prado, I.Hurtado, Acta Mater. 58, 2988 (2010) |
| [13] | T. Al-Samman, Acta Mater. 57, 2229 (2009) |
| [14] | S.R. Agnew, O ¨ . Duygulu, Int. J. Plast. 21, 1161 (2005) |
| [15] | N.V. Dudamell, I. Ulacia, F. Ga´lvez, S. Yi, J. Bohlen, D. Letzig,I. Hurtado, M.T. Pe´rez-Prado, Mater. Sci. Eng. A 532, 528 (2012) |
| [16] | D. Ponge, G. Gottstein, Acta Mater. 46, 69 (1998) |
| [17] | G.Y. Cai, X.T. Huang, S.M. Qu, Phys. Proced. 50, 61 (2013) |
| [18] | S. Spigarelli, O.A. Ruano, M. EI Mehtedi, J.A. Del Valle, Mater.Sci. Eng. A 570, 135 (2013) |
| [19] | A.R. Antoniswamy, A.J. Carpenter, J.T. Carter, L.G. Hector Jr,E.M. Taleff, J. Mater. Eng. Perform. 22, 3389 (2013) |
| [20] | F.K. Chen, T.B. Huang, C.K. Chang, Inter. J. Mach. Tools Manuf. 43, 1553 (2003) |
| [21] | F. Kabirian, A.S. Khan, T. Gna¨upel-Herlod, Int. J. Plast. 68, 1 (2015) |
| [22] | A. Chapuis, J.H. Driver, Acta Mater. 59, 1986 (2011) |
| [23] | H.L. Kim, W.K. Bang, Y.W. Chang, Mater. Sci. Eng. A 528,5356 (2011) |
| [24] | H. Li, Q.Q. Duan, X.W. Li, Z.F. Zhang, Mater. Sci. Eng. A 466,38 (2007) |
| [25] | L.L. Li, P. Zhang, Z.J. Zhang, H.F. Zhou, S.X. Qu, J.B. Yang,Z.F. Zhang, Acta Mater. 73, 167 (2014) |
| [26] | A. Jain, S.R. Agnew, Mater. Sci. Eng. A 462, 29 (2007) |
| [27] | J.G. Yun, Y. Yan, F.W. Long, X.W. Li, Mater. Trans. 54, 1709 (2013) |
| [28] | M.T. Tucker, M.F. Horstemeyer, P.M. Gullett, H. EI Kadiri,W.R. Whittington, Scr. Mater. 60, 182 (2009) |
| [29] | Q. Liu, Acta Metall. Sin. 46, 1458 (2010). (in Chinese) |
| [30] | R.O. Kaibyshev, B.K. Sokolov, A.M. Galiyev, Texture Microstruct.32, 47 (1999) |
| [31] | J.A. Del Valle, M.T. Perez-Prado, O.A. Ruano, Mater. Sci. Eng.A 355, 68 (2003) |
| [32] | L. Wen, P. Chen, Z.F. Tong, B.Y. Tang, L.M. Peng, W.J. Ding,Eur. Phys. J. B 72, 397 (2009) |
| [33] | A.E. Smith, Sur. Sci. 601, 5762 (2007) |
| [34] | S.E. Ion, F.J. Humphreys, S.H. White, Acta Metall. 30, 1909 (1982) |
| [35] | Z.Q. Cui, Metallurgy and Heat Treatment (Mechanical Industry Press, Beijing, 2002), p. 206. (in Chinese) |
| [36] | F.W. Long, Q.W. Jiang, L. Xiao, X.W. Li, Mater. Trans. 52,1617 (2011) |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%