The effect of rare earth (RE) on creep rupture of economical 21Cr-11Ni-N heat-resistant austenitic steel was investigated at 650 °C under different stress levels. It was found that RE could increase the time to creep rupture, especially at long-term creep dura-tion. The logarithm of the time to creep rupture (lgtr) was a linear function of the applied stress (σ). RE addition was favorable to gen-erating a high fraction of low-coincidence site lattice (CSL) boundaries which was a possible cause for improving the creep rupture resistance. The fracture surface of RE-added steel exhibited less intergranular cracks suggesting the alteration on the nature of grain boundaries due to the presence of RE. RE addition changed the morphology of the intergranular chromium carbides from continuous network shape to fragmentary distribution which was another cause for longer creep duration. These results strongly suggested that the effect of RE alloying played a crucial role in improving the creep rupture resistance.
参考文献
| [1] | Lei Chen;Xiaocong Ma;Longmei Wang;Xiaoning Ye.Effect of rare earth element yttrium addition on microstructures and properties of a 21Cr-llNi austenitic heat-resistant stainless steel[J].Materials & design,20114(4):2206-2212. |
| [2] | Liu, W. B.;Zhang, C.;Xia, Z. X.;Yang, Z. G..Improving high temperature creep resistance of reduced activation steels by addition of nitrogen and intermediate heat treatment[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,20141/3(1/3):402-406. |
| [3] | Mathew, M.D.;Laha, K.;Ganesan, V..Improving creep strength of 316L stainless steel by alloying with nitrogen[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:76-83. |
| [4] | K. Laha;J. Kyono;N. Shinya.An advanced creep cavitation resistance Cu-containing 18Cr-12Ni-Nb austenitic stainless steel[J].Scripta materialia,200710(10):915-918. |
| [5] | Manabu TAMURA;Hisao ESAKA;Kei SHINOZUKA.Stress and Temperature Dependence of Time to Rupture of Heat Resisting Steels[J].ISIJ International,19994(4):380-387. |
| [6] | M.P. Phaniraj;M.J.N.V. Prasad;A.H. Chokshi.Grain-size distribution effects in plastic flow and failure[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20071/2(1/2):231-237. |
| [7] | Takasawa, Koichi;Chinen, Hibiki;Ohkawa, Takuya;Maeda, Eiji;Hatano, Takashi.Effects of Phosphorus on Creep Properties of Nickel-Iron Base Superalloy[J].ISIJ International,20155(5):1100-1105. |
| [8] | Sinha, Subhasis;Kim, Dong-Ik;Fleury, Eric;Suwas, Satyam.Effect of grain boundary engineering on the microstructure and mechanical properties of copper containing austenitic stainless steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2015:175-185. |
| [9] | Bogdan Alexandreanu;Bulent H. Sencer;Visit Thaveeprungsriporn;Gary S. Was.The effect of grain boundary character distribution on the high temperature deformation behavior of Ni-16Cr-9Fe alloys[J].Acta materialia,200313(13):3831-3848. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%