通过力学性能表征、光学显微镜和SEM电镜观察结合EDS分析,对AlMg6Mn合金在剪切旋压过程中的变形行为和微观结构进行研究.将样品在一工业旋压机上进行剪切旋压变形,压下量分别为30％,50％和68％.晶粒在剪切旋压过程中逐渐得到细化.随着压下量的增大,晶粒沿轴向拉长,沿圆周方向收缩.得到了最优的强度和伸长率,这归因于晶粒细化和固溶体中粒子与Mg、Mn原子之间的位错反应.
Deformation behavior and microstructure of AlMg6Mn alloy subjected to shear spinning were studied by means of mechanical characterization,optical and SEM+EDS microscopy.Specimens were shear spun on an industrial spinning machine usingdifferent mandrels,providing reductions of wall thickness of 30％,50％ and 68％.The grain structure developed during shearspinning refines gradually.The grains elongate in axial direction with increase of reduction,and also stretches along circumferencialdirection.Optimal combination of strength and elongation is observed.This is attributed to grain refinement and dislocation reactionswith particles and atoms of Mg and Mn in solid solution.
参考文献
| [1] | AVITZUR B.Handbook of metal-forming processes[M].New York:John Wiley and Sons,Inc,1983 |
| [2] | C. C. Wong;T. A. Dean J. Lin .A review of spinning, shear forming and flow forming processes[J].International Journal of Machine Tools & Manufacture: Design, research and application,2003(14):1419-1435. |
| [3] | ASM metals handbook:forming and forging[M].Ohio:ASM Metals Park,1988 |
| [4] | XU Wen-chen,SHAN De-bin,WANG Zhen-long,YANG Guo-ping,L(U) Yan,KANG Da-chang.Effect of spinning deformation on microstructure evolution and mechanical property of TA 15 titanium alloy[J].中国有色金属学会会刊（英文版）,2007(06):1205-1211. |
| [5] | MA Fei,YANG He,ZHAN Mei.Effects of material properties on power spinning process of parts with transverse inner rib[J].中国有色金属学报（英文版）,2010(08):1476-1481. |
| [6] | S. -C. Chang;C. -A. Huang;S. -Y. Yu;Y. Chang;W. -C. Han;T. -S. Shieh;H. -C. Chung;H. -T. Yao;G. -D. Shyu .Tube spinnability of AA 2024 and 7075 aluminum alloys[J].Journal of Materials Processing Technology,1998(0):676-682. |
| [7] | Jahazi M.;Ebrahimi G. .The influence of flow-forming parameters and microstructure on the quality of a D6ac steel[J].Journal of Materials Processing Technology,2000(3):362-366. |
| [8] | RAJAN K M;DESHPANDE P U;NARASIMHAN K .Effect of heat treatment of preform of the mechanical properties of low formed AISI 4130 steel mbes-A theoretical and experimental assessment[J].Journal of Materials Processing Technology,2002,125-126:503-511. |
| [9] | G(U)R C H;ARDA E B .Effect of tube spinning and subsequent heat treatments on strength,microstructure and residuai stress state of A1S1/SAE type 4140 steel[J].Materials Science and Technology,2003,19:1590-1594. |
| [10] | RADOVI(C) L;NIKA(C)EVI(C) M.Effect of shear spinning and chemical composition on microstructure evolution and mechanical property of Al-Mg alloys[A].Belgrade:Military Technical Institute,Proceedings on CD,2009 |
| [11] | ASM metals handbook:Heat treating[M].Ohio:ASM Metals Park,1991 |
| [12] | BURGER G B;GUPTA A K;JEFFREY P W;LLOYD D J .Microstructural control of aluminium sheet used in automotive applications[J].Materials Characterization,1995,35:23-29. |
| [13] | Gyozo Horvath;Nguyen Q. Chinh;Jeno Gubicza .Plastic instabilities and dislocation densities during plastic deformation in Al-Mg alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):186-192. |
| [14] | LLOYD D J .The deformation of commercial aluminium-magnesitum alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1980,11:1287-1294. |
| [15] | LLOYD D J;KENNY D .The large strain deformation of some aluminium alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1982,13:1445-1451. |
| [16] | SEN R;KAISER S;MITRA M K;BANERJEE M K .Plane strain fracture toughness of scandium doped A1-6Mg alloy[J].Journal of Alloys and Compounds,2008,457:135-143. |
| [17] | ROMHANJI E;POPOVI(C) M;RADMILOVIC) V .Room temperature deformation behaviour of AlMg6.5 alloy sheet[J].Zeitschrift fur Metallkunde,1999,90(04):305-310. |
| [18] | TIMOSHENKO Y B .On the relation between the Luders deformatinn and grain boundary structure in aluminium alloy[J].Revue Phys Appl,1990,25:1001-1004. |
| [19] | GLI(S)I(C) D;MILENKOVI(C) V;ROMHANJI E .Forming aspects of high-strength A(l)-Mg alloy sheet[J].Materials and Technologies,2001,35(1-2):21-24. |
| [20] | D. J. Lloyd;S. A. Court .Influence of grain size on tensile properties of Al-Mg alloys[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2003(10):1349-1354. |
| [21] | M.Wagenhofer;M.E.Natishan .Influences of strain rate and grain size on yield and serrated flow in commercial Al-Mg alloy 5086[J].Scripta materialia,1999(11):1177-1184. |
| [22] | E.L. Huskins;B. Cao;K.T. Ramesh .Strengthening mechanisms in an Al–Mg alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(6):1292-1298. |
| [23] | MUKAI T;HIGASHI K;TANIMURA S .Influence of the magnesium concentration on the relationship between fracture mechanism and strain rate in high purity Al-Mg alloys[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1994,176:181-189. |
| [24] | M.Wagenhofer;M.E.Natishan .Influences of strain rate and grain size on yield and serrated flow in commercial Al-Mg alloy 5086[J].Scripta materialia,1999(11):1177-1184. |
| [25] | Ildong Choi;Sunhwa Jin;Sukbong Kang .Effects of microstructure and alloy contents on the luders line formation in Al-Mg alloys[J].Scripta materialia,1998(6):887-892. |
| [26] | PINK E;GRINBERG A .Stress drops in serrated flow curves of A(l)5Mg[J].Acta Metallurgica,1982,30:2153-2160. |
| [27] | ROBINSON J M;SHAW M P .Observations on deformation characteristics and microstructure in an AlMg alloy during serrated flow[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1994,174:1-7. |
| [28] | Wen W;Zhao YM;Morris JG .The effect of Mg precipitation on the mechanical properties of 5xxx aluminum alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):136-144. |
| [29] | Wen W.;Morris JG. .An investigation of serrated yielding in 5000 series aluminum alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):279-285. |
| [30] | Tian BH. .Ageing effect on serrated flow in Al-Mg alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):272-278. |
| [31] | KLOSE F B;HAGEMANN F;H(A)HNER P;NEUH(A)USER H .Investigation of the Portevin-LeChat(c)lier effect in Al-3wt.％ Mg alloys by strain-rate and stress-rate controlled tensile tests[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,387-389:93-97. |
| [32] | FUJITA H;TABATA T .Discontinuous deformation in Al-Mg alloys[J].Acta Metallurgica,1977,25:793-800. |
| [33] | COURT A;GATENBY K M;LLOYD D J .Factors affecting the strength and formability of alloys based on A(l)-3 wt.％ M8[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2001,319-321:443-447. |
| [34] | F. H. SAMUEL;A.M. SAMUEL;H. W. DOTY .Influence of Composition, Sr Modification, and Annealing Treatment on the Structure and Properties of Cast Al-4 Pct Mg Alloys[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2003(1):115-129. |
| [35] | ROMHANJI E;POPOVI(C) M;GLI(S)IC) D;STEFANOVI(C) M MILOVANOVI(C) M .On the Al-Mg alloy sheets for automotive applications:Problems and solutions[J].Journal of Metallurgy,2004,10(03):205-216. |
| [36] | RADOVI(C) Lj;NIKA(C)EVIC) M;POPOVI(C) M;ROMHANJI E.Effect of cold rolling reduction on critical strains and final grain size of Al-Mg alloys containing Mn[A].Belgrade:SIMJ,2005:231-236. |
| [37] | Y.M. Zhao;W. Wen;J.G. Moms .The differences in particle structures and recrystallization behaviors between DC and CC AA5052 aluminum alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):167-174. |
| [38] | MCSHANE H B;LEE C P;SHEPPARD T .Structure,anisotropy,and properties of hot rolled AA 5083 alloy[J].Materials Science and Technology,1990,6:428-440. |
| [39] | KEGG R L .A new teet method for determination of spinnability of metals[J].Journal of Engineering for Industry,Transactions of the ASME,1961,83:119-124. |
| [40] | ZAIDI M A;SHEPPARD T .Effect of high-temperature soak and cooling rate on recrystallization behaviour of two Al-Mg alloys (AA5252 and AA5454)[J].Metals and Technology,1984,11:313-319. |
| [41] | LEE S L;WU S T .Indication of dispersoids in Al-Mg alloys containing Mn[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1987,18:1353-1357. |
| [42] | RADOVIC Lj;NIKACEVIC M .Microstructure and properties of cold rolled and annealed Al-Mg alloys[J].Scientific Technical Review,2008,LVⅢ(02):14-20. |
| [43] | SHEPARD T;RAGHUNATHAN N .Modification of cast structures in Al-Mg alloys by thermal treatments[J].Materials Science and Technology,1989,5:268-280. |
| [44] | M. Osman;O. Engler;K. Karhausen .The Influence of Homogenisation Heat Treatment on Microstructure Development in Al-Mg-Mn Alloy AA5454[J].Materials Science Forum,2002(Pt.1):351-356. |
| [45] | CHAIJARUWANICH A;LEE P D;DASHWOOD R J;YOUSSEF Y M NAGAUMI H .Evolution of pore morphology and distribution during the homogenization of direct chill cast Al-Mg alloys[J].Acta Materialia,2007,55:285-283. |
| [46] | Hiromi NAGAUMI;Kiyomi TSUCHIYA .Effects of Mg contents on porosity formation in Al-Mg alloy DC slabs[J].軽金属,2002(7):293-297. |
| [47] | PALIGORIC A;RADAN R.Metal forming by spinning[M].Belgrade:Military Technical Institute,1976 |
| [48] | S(a)TER J A;VATNE H E .Experimental investigation of particle break-up during cold deformation on non heat treatable aluminium alloys[J].Materials Science Forum,2000,331-337:763-768. |
| [49] | L. Dupuy;J.-J. Blandin .Damage sensitivity in a commercial Al alloy processed by equal channel angular extrusion[J].Acta materialia,2002(12):3251-3264. |
| [50] | PARK K T;MYUNG S H;SHIN D H;LEE C S .Size and distribution of particles and voids pre-existing in equal channel angular pressed 5083 Al alloy:Their effect on cavitation during Iow-temperature superplastic deformation[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,371:178-186. |
| [51] | ASM metals handbook,properies and selection:nonferrous alloys and pure metals:Vo(L) 2[M].Ohio:ASM Metals Park,1979 |
| [52] | DROBNJAK Dj.Physical metallurgy[M].Belgrade:Faculty of Technology and Metallurgy,1988 |
| [53] | RADOVI(C) Lj;NIKA(C)EVI(C) M.Effect of forming technology on microstructure and properties of Al-Mg alloys[A].Belgrade:Military Technical Institute,2011:644-647. |
| [54] | RADOVI(C) Lj .The influence of thermomechanical treatment and chemical composition on formability of Al-Mg alloys[D].Belgrade:Faculty of Technology and Metallurgy,2008. |
| [55] | SMALLMAN R E;BISHOP R J.Modem physical metallurgy and materials engineering[M].Oxford:Butterworth-Heinemann,1999 |
| [56] | CHENG Xiang-ming .Texture,microstructure and formability of aluminum alloys[D].Lexington:University of Kentucky,2000. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%