为合理模拟 AZ80镁合金的热挤压织构，在粘塑性自洽(VPSC)多晶体塑性框架中实现了动态再结晶织构的模拟。基于此模型，考察了挤压温度和挤压边界条件对 AZ80镁合金挤压织构的影响，模拟所得结果与实验结果有较好的吻合。模拟结果表明：新的大角度界面(HABs)的形成使再结晶晶粒与母晶之间形成取向差，再结晶晶粒因此偏离母晶形成了{2110}纤维织构组分。此外，因为基面?a?滑移具有更低的滑移抗力并易于开动，当垂直于挤压轴方向上加载的应变不再轴对称时，晶粒的基面总倾向于转向加载应变更多的方向以便于基面?a?滑移承载更多的塑性变形。挤压温度的升高有利于锥面?c+a?滑移的开动并使再结晶体积分数增多，在一定程度上弱化了挤压形成的基面织构。
The visco-plastic self-consistent (VPSC) model is extended to take the dynamical recrystallization (DRX) into account so that the hot extrusion texture of AZ80 magnesium alloy can be properly modeled. The effects of extrusion temperatures and imposed boundary conditions on the resulting textures were investigated, and good agreement can be found between the simulated and the measured extrusion textures. The simulated results show that the DRX grains are responsible for the formation of the {2110} fiber component since the {1010} poles of the DRX grains are tilted away from those of the unrecrystallized grains during the formation of their high angle boundaries (HABs). Furthermore, the basal poles of the grains are favorably oriented to the transversal direction (TD) where the imposed deformation is larger due to lower slip resistance of the basal slip. The elevated temperature enhances the activity of pyramidal ?c+a? slip modes and gives rise to a larger recrystallized volume fraction, resulting in a weakened extrusion texture.
参考文献
| [1] | Shahzad, M;Wagner, L.Influence of extrusion parameters on microstructure and texture developments, and their effects on mechanical properties of the magnesium alloy AZ80[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,20091/2(1/2):141-147. |
| [2] | Bohlen, J.;Yi, S.;Letzig, D.;Kainer, K.U..Effect of rare earth elements on the microstructure and texture development in magnesium-manganese alloys during extrusion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201026(26):7092-7098. |
| [3] | N. Stanford;M.R. Barnett.The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):399-408. |
| [4] | Agnew SR;Mehrotra P;Lillo TM;Stoica GM;Liaw PK.Texture evolution of five wrought magnesium alloys during route A equal channel angular extrusion: Experiments and simulations[J].Acta materialia,200511(11):3135-3146. |
| [5] | Biswas, S.;Suwas, S.;Sikand, R.;Gupta, A.K..Analysis of texture evolution in pure magnesium and the magnesium alloy AM30 during rod and tube extrusion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201110/11(10/11):3722-3729. |
| [6] | Mayama, T.;Noda, M.;Chiba, R.;Kuroda, M..Crystal plasticity analysis of texture development in magnesium alloy during extrusion[J].International Journal of Plasticity,201112(12):1916-1935. |
| [7] | 黄诗尧;张少睿;李大永;彭颖红.基于弹塑性自洽模型的AZ31镁合金轧制过程的织构模拟[J].中国有色金属学报（英文版）,2011(6):1348-1354. |
| [8] | 黄诗尧;张少睿;李大永;彭颖红.基于耦合有限元的晶体塑性力学模型的FCC,BCC和HCP晶体织构演化的模拟[J].中国有色金属学报（英文版）,2011(8):1817-1825. |
| [9] | H.-R.WENK;G.CANOVA;Y.BRECHET.A DEFORMATION-BASED MODEL FOR RECRYSTALLIZATION OF ANISOTROPIC MATERIALS[J].Acta materialia,19978(8):3283-3296. |
| [10] | B.L. Wu;Y.D. Zhang;X.H. Du;F. Wagner;C. Esling.Fragmentation of large grains in AZ31 magnesium alloy during ECAE via route A[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201015(15):3365-3372. |
| [11] | Ostapovets, A.;Molnár, P.;J?ger, A..Visco-plastic self-consistent modelling of a grain boundary misorientation distribution after equal-channel angular pressing in an AZ31 magnesium alloy[J].Journal of Materials Science,20135(5):2123-2134. |
| [12] | S.R.AGNEW;M.H.YOO;C.N.TOME.APPLICATION OF TEXTURE SIMULATION TO UNDERSTANDING MECHANICAL BEHAVIOR OF Mg AND SOLID SOLUTION ALLOYS CONTAINING Li OR Y[J].Acta materialia,200120(20):4277-4289. |
| [13] | Oleg Sitdikov;Rustam Kaibyshev.Dynamic recrystallization in pure magnesium[J].Materials transactions,20019(9):1928-1937. |
| [14] | Shao, Yichuan;Tang, Tao;Li, Dayong;Tang, Weiqin;Peng, Yinghong.Crystal plasticity finite element modelling of the extrusion texture of a magnesium alloy[J].Modelling and simulation in materials science and engineering,20155(5) |
| [15] | Quan, G.-Z.;Shi, Y.;Wang, Y.-X.;Kang, B.-S.;Ku, T.-W.;Song, W.-J..Constitutive modeling for the dynamic recrystallization evolution of AZ80 magnesium alloy based on stress-strain data[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201128(28):8051-8059. |
| [16] | E.I.POLIAK;J.J.JONAS.A ONE-PARAMETER APPROACH TO DETERMINING THE CRITICAL CONDITIONS FOR THE INITIATION OF DYNAMIC RECRYSTALLIZATION[J].Acta materialia,19961(1):127-136. |
| [17] | A. Jain;S.R. Agnew.Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,20071-2(1-2):29-36. |
| [18] | M.R. BARNETT.A Taylor Model Based Description of the Proof Stress of Magnesium AZ31 during Hot Working[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20039(9):1799-1806. |
| [19] | C.A.HERNADEZ;S.F.MEDINA;J.RUIZ.MODELLING AUSTENTE FLOW CURVES IN LOW ALLOY AND MICROALLOYED STEELS[J].Acta materialia,19961(1):155-163. |
| [20] | LI JIN;RAJA K. MISHRA;ANIL K. SACHDEV.Texture Modification During Extrusion of Some Mg Alloys[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20126(6):2148-2157. |
| [21] | Raja K. Mishra;Anil K. Gupta;P. Rama Rao,.Influence of cerium on the texture and ductility of magnesium extrusions[J].Scripta materialia,20085(5):562-565. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%