为了描述等原子比NiTi形状记忆合金在高温下的变形行为和热加工性能，通过在温度范围为500~1100°C和应变速率范围为0.0005~0.5 s?1的热压缩实验构建了该合金的Arrhenius型本构方程和热加工图。结果表明：热加工图的失稳区随着变形程度的增加而增大。失稳发生在低温区和高温区，低温区的失稳特征表现为绝热剪切带，而高温区的失稳特征则表现为晶粒的异常长大。因此，必须避免在这些失稳区域加工该等原子比NiTi形状记忆合金。加工该NiTi形状记忆合金的最佳温度范围为750~900°C。
In order to describe the deformation behavior and the hot workability of equiatomic NiTi shape memory alloy (SMA) during hot deformation, Arrhenius-type constitutive equation and hot processing map of the alloy were developed by hot compression tests at temperatures ranging from 500 to 1100 °C and strain rates ranging from 0.0005 to 0.5 s?1. The results show that the instability region of the hot processing map increases with the increase of deformation extent. The instability occurs in the low and high temperature regions. The instability region presents the adiabatic shear bands at low temperatures, but it exhibits the abnormal growth of the grains at high temperatures. Consequently, it is necessary to avoid processing the equiatomic NiTi SMA in these regions. It is preferable to process the NiTi SMA at the temperatures ranging from 750 to 900 °C.
参考文献
| [1] | 江树勇;胡励;赵亚楠;张艳秋;梁玉龙.镍钛形状记忆合金在局部包套压缩下的塑性屈服[J].中国有色金属学报（英文版）,2013(10):2905-2913. |
| [2] | 江树勇;唐明;赵亚楠;胡励;张艳秋;梁玉龙.大塑性变形制备的非晶镍钛形状记忆合金的晶化[J].中国有色金属学报（英文版）,2014(6):1758-1765. |
| [3] | 江树勇;张艳秋;赵亚楠.镍钛形状记忆合金在热压缩变形下的动态回复和动态再结晶[J].中国有色金属学报（英文版）,2013(1):140-147. |
| [4] | S.K. Sadrnezhaad;S.H. Mirabolghasemi.Optimum temperature for recovery and recrystallization of 52Ni48Ti shape memory alloy[J].Materials & Design,20076(6):1945-1948. |
| [5] | 江树勇;赵亚楠;张艳秋;唐明;李春峰.镍钛形状记忆合金管的等通道转角挤压[J].中国有色金属学报（英文版）,2013(7):2021-2028. |
| [6] | JIANG Shu-yong;ZHANG Yan-qiu;ZHAO Ya-nan;TANG Ming;YI Wen-lin.Constitutive behavior of Ni-Ti shape memory alloy under hot compression[J].中南大学学报（英文版）,2013(01):24-29. |
| [7] | M. Morakabati;M. Aboutalebi;Sh. Kheirandish.High temperature deformation and processing map of a NiTi intermetallic alloy[J].Intermetallics,201110(10):1399-1404. |
| [8] | Rezaei Ashtiani, H.R.;Parsa, M.H.;Bisadi, H..Constitutive equations for elevated temperature flow behavior of commercial purity aluminum[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:61-67. |
| [9] | Mandal, S;Rakesh, V;Sivaprasad, PV;Venugopal, S;Kasiviswanathan, KV.Constitutive equations to predict high temperature flow stress in a Ti-modified austenitic stainless steel[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,20091/2(1/2):114-121. |
| [10] | Characterization of mechanisms of hot deformation of as-cast nickel aluminide alloy[J].Intermetallics,20009/11(9/11):987-995. |
| [11] | S. Ramanathan;R. Karthikeyan;Manoj Gupta.Development of processing maps for Al/SiC{sub}p composite using fuzzy logic[J].Journal of Materials Processing Technology,20071(1):104-110. |
| [12] | 曾卫东;周义刚;周军;俞汉清;张学敏;徐斌.加工图理论研究进展[J].稀有金属材料与工程,2006(5):673-677. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%