欢迎登录材料期刊网

材料期刊网

高级检索

为了给铜-铁合金选择合适的化学成分以及建立材料-显微组织-性能之间的关系,研究了铁含量对激光-感应复合快速熔覆铜-铁基复合涂层显微组织与性能的影响。采用扫描电镜、X 射线衍射仪与能量衍射谱测试了复合涂层的显微组织,采用显微硬度评估复合涂层的力学性能。结果表明:当铜-铁粉末中的铁含量较低时,复合涂层具有富铁等轴枝晶的生长特征,并且镶嵌于富铜基体内;随着铁含量的增加,富铁颗粒弥散分布于富铜基体内;随着铁含量的进一步增加,大量富铜颗粒弥散分布于富铁基体的树枝晶间。因此,随着铜-铁粉末内铁含量的增加,复合涂层的平均显微硬度逐渐增加,且 Cu14.5Fe83Si2C0.5涂层的显微硬度是基材的两倍多。

To select the proper composition and obtain an overall material?microstructure?property relationship for Cu?Fe alloy, the effect of Fe content on microstructure and properties of Cu?Fe-based composite coatings by laser induction hybrid rapid cladding was investigated. Microstructure characterization of the composite coatings was tested utilizing SEM, XRD and EDS. Microhardness measurement was executed to evaluate the mechanical properties of the composite coatings. The results show that for low Fe content, the composite coating presents a feature that Fe-rich equiaxed dendrites are embedded in the Cu-rich matrix. With increasing Fe content, the Fe-rich particles are dispersed in the Cu-rich matrix. With further increasing Fe content, large amounts of Cu-rich particles are homogeneously dispersed in the interdendrite of the Fe-rich matrix. Correspondingly, the average microhardness of the composite coatings increases gradually with the increase of Fe content and the microhardness of Cu14.5Fe83Si2C0.5 coating is much twice higher than that of the substrate.

参考文献

[1] SUN Zhan-bo;WANG You-hong;GUO Juan.Liquid phase separation of Cu-Cr alloys during rapid cooling[J].中国有色金属学会会刊(英文版),2006(05):998-1002.
[2] YANG Gen-cang;XIE Hui;HAO Wei-xin;ZHANG Zhong-ming;GUO Xue-feng.Liquid-liquid phase separation in highly undercooled Ni-Pb hypermonotectic alloys[J].中国有色金属学会会刊(英文版),2006(02):290-293.
[3] 郭晋波;曹崇德;弓素莲;宋瑞波;白晓军;王建元;郑建邦;文喜星;孙占波.不同冷却条件下Cu60Co30Cr10合金的快速凝固[J].中国有色金属学报(英文版),2013(3):731-734.
[4] JUNTING ZHANG;XIAOCHAO CUI;YUTAN YANG.Solidification of the Cu-35wt pct Fe Alloys with Liquid Separation[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,201312(12):5544-5548.
[5] S.B. Luo;W.L. Wang;J. Chang.A comparative study of dendritic growth within undercooled liquid pure Fe and Fe_(50)Cu_(50) alloy[J].Acta materialia,2014:355-364.
[6] X. Y. Lu;C. D. Cao;B. Wei.Microstructure evolution of undercooled iron-copper hypoperitectic alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20011/2(1/2):198-206.
[7] 罗炳池;王海鹏;魏炳波.自由落体条件下三元Ni-Pb-Cu偏晶合金的快速凝固[J].中国有色金属学报,2009(2):279-285.
[8] He J;Zhao JZ;Ratke L.Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu-Fe alloys[J].Acta materialia,20067(7):1749-1757.
[9] J.Z. Zhao.Formation of The Minor Phase Shell on The Surface of hypermonotectic Alloy Powders[J].Scripta materialia,20062(2):247-250.
[10] 陈书;赵九洲.偏晶合金在激光表面处理条件下的凝固行为研究[J].金属学报,2013(5):537-543.
[11] 张林;王恩刚;左小伟;赫冀成.磁场对Cu-Pb-La过偏晶合金液-液分离的作用[J].稀有金属材料与工程,2015(2):344-348.
[12] Munitz, A.;Venkert, A.;Landau, P.;Kaufman, M.J.;Abbaschian, R..Microstructure and phase selection in supercooled copper alloys exhibiting metastable liquid miscibility gaps[J].Journal of Materials Science,201223(23):7955-7970.
[13] 朱定一;杨晓华;韩秀君;魏炳波.Fe-Sn偏晶合金的深过冷快速凝固组织[J].中国有色金属学报,2003(2):328-334.
[14] 孙倩;江鸿翔;赵九洲.微量元素Bi对Al-Pb合金凝固过程及显微组织的影响[J].金属学报,2016(4):497-504.
[15] He H;Zhao HZ.Behavior of Fe-rich phase during rapid solidification of Cu-Fe hypoperitectic alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20051/2(1/2):85-90.
[16] Liu, N..Investigation on the phase separation in undercooled Cu-Fe melts[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,20122(2):196-199.
[17] 周圣丰;戴晓琴;熊征;张天佑;吴超.激光-感应复合熔覆Cu-Fe合金涂层的结构与性能[J].中国有色金属学报,2014(7):1812-1816.
[18] Shengfeng Zhou;Xiaoqin Dai;Zheng Xiong;Chao Wu;Tianyou Zhang;Zezhong Zhang.Influence of Al addition on microstructure and properties of Cu–Fe-based coatings by laser induction hybrid rapid cladding[J].Journal of Materials Research,20147(7):865-873.
[19] Shengfeng Zhou;Chao Wu;Tianyou Zhang.Carbon nanotube- and Fe_p-reinforced copper-matrix composites by laser induction hybrid rapid cladding[J].Scripta materialia,2014:25-28.
[20] QING CHEN;ZHANPENG JIN.The Fe-Cu System: A Thermodynamic Evaluation[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,19952(2):417-426.
[21] Y. T. Pei;J. T. M. D. Hosson.FUNCTIONALLY GRADED MATERIALS PRODUCED BY LASER CLADDING[J].Acta materialia,200010(10):2617-2624.
[22] C. P. WANG;X. J. LIU;Y. TAKAKU.Formation of Core-Type Macroscopic Morphologies in Cu-Fe Base Alloys with Liquid Miscibility Gap[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20044(4):1243-1253.
[23] R.P. Shi;C.P. Wang;D. Wheeler.Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immiscible alloys[J].Acta materialia,20134(4):1229-1243.
[24] Tanaka H..A NEW COARSENING MECHANISM OF DROPLET SPINODAL DECOMPOSITION[J].The Journal of Chemical Physics,19956(6):2361-2364.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%