采用放电合金化工艺对 AA6082 Al?Mg?Si 时效硬化铝合金进行表面改性。在放电合金化过程中，作为工作液的煤油热解成碳，从而形成附着于合金表面的自润滑碳化物层。TEM 结果表明，合金表面形成的自润滑碳化物层为由碳化物和石墨组成的多相材料。因此，经放电合金化改性铝合金的摩损率极小，约为2×10?4 mg/m，而铝合金基体的磨损率约为1.1×10?2 mg/m。显然，在铝合金表面经放电合金化形成的碳化物为一种能改善合金抗电磁干扰性能的软磁体。
The surface modification on the AA6082 Al?Mg?Si aging-hardenable aluminum alloy was investigated by electrical discharge alloying (EDA) process. Kerosene, used as a dielectric fluid, was pyrolytically decomposed into carbon for the formation of a self-lubricated carbide layer on the aluminum alloy surface during EDA process. Transmission electron microscopy (TEM) image found that the self-lubricated carbide layer was a multi-phase material with carbides and graphite. As a result, the EDA-modified aluminum alloy had a negligible wear rate of ~2′10?4 mg/m (c. f. ~1.1′10?2 mg/m for aluminum alloy substrate). Notably, a new characteristic was found that the EDA-processed carbide layer was a soft magnet, which improved the electromagnetic interference (EMI) shielding performance of the alloy.
参考文献
| [1] | Dadbakhsh, S.;Karimi Taheri, A.;Smith, C.W..Strengthening study on 6082 Al alloy after combination of aging treatment and ECAP process[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201018/19(18/19):4758-4766. |
| [2] | G.A.Edwards;K.Stiller;G.L.Dunlop.The precipitation sequence in Al-Mg-Si alloys[J].Acta materialia,199811(11):3893-3904. |
| [3] | M. MURAYAMA;K. HONO.PRE-PRECIPITATE CLUSTERS AND PRECIPITATION PROCESSES IN Al-Mg-Si ALLOYS[J].Acta materialia,19995(5):1537-1548. |
| [4] | C.D. Marioara;S.J. Andersen;J. Jansen.The influence of temperature and storage time at RT on nucleation of the beta" phase in a 6082 Al-Mg-Si alloy[J].Acta materialia,20033(3):789-796. |
| [5] | S. Baragetti;G.M. La Vecchia;A. Terranova.Variables affecting the fatigue resistance of PVD-coated components[J].International Journal of Fatigue,200510/12(10/12):1541-1550. |
| [6] | Aleksandar Vencl;Ilija Bobic;Milan T. Jovanovic;Miroslav Babic;Slobodan Mitrovic.Microstructural and Tribological Properties of A356 Al-Si Alloy Reinforced with Al{sub}2O{sub}3 Particles[J].Tribology letters,20083(3):159-170. |
| [7] | Tekin, K.C.;Malayoglu, U.;Shrestha, S..An investigation into the mechanical and tribological properties of plasma electrolytic oxidation and hard-anodized coatings on 6082 aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201124(24):7451-7460. |
| [8] | K. H. Ho;S. T. Newman.State of the art electrical discharge machining (EDM)[J].International Journal of Machine Tools & Manufacture: Design, research and application,200313(13):1287-1300. |
| [9] | Kuo-Ming Tsai;Pei-Jen Wang.Predictions on surface finish in electrical discharge machining based upon neural network models[J].International Journal of Machine Tools & Manufacture: Design, research and application,200110(10):1385-1403. |
| [10] | Ajit Singh;Amitabha Ghosh.A thermo-electric model of material removal during electric discharge machining[J].International Journal of Machine Tools & Manufacture: Design, research and application,19994(4):669-682. |
| [11] | Kuralay Stambekova;Hung-Mao Lin;Jun-Yen Uan.Surface modification of 5083 Al alloy by electrical discharge alloying processing with a 75 mass% Si-Fe alloy electrode[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,201210(10):4483-4488. |
| [12] | Patowari, P. K.;Saha, P.;Mishra, P. K..An experimental investigation of surface modification of C-40 steel using W-Cu powder metallurgy sintered compact tools in EDM[J].The International Journal of Advanced Manufacturing Technology,20151/4(1/4):343-360. |
| [13] | Mukul Kumar;Maheshwar Sharon;Yoshinori Ando;Xinluo Zhao.Electron field emission from carbon films grown from pyrolysis of kerosene[J].Diamond and Related Materials,20013 Pt.2(3 Pt.2):883-888. |
| [14] | Chen, Y.-T.;Wang, D.-A.;Uan, J.-Y.;Hsieh, T.-H.;Tsai, T.-C..Tensile strength and deformation microstructure of Al-Mg-Si alloy sheet by through-width vibration rolling process[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:296-300. |
| [15] | Hui Wang;Haowei Wang.Fabrication of self-lubricating coating on aluminum and its frictional behaviour[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,20079(9):4386-4389. |
| [16] | Gao Y;Huang L;Zheng ZJ;Li H;Zhu M.The influence of cobalt on the corrosion resistance and electromagnetic shielding of electroless Ni-Co-P deposits on Al substrate[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,200724(24):9470-9475. |
| [17] | Xuan Tianpeng;Yang Guangzhou;Yang Lilin;Ju Zhengting.Study on Electromagnetic Shielding Effectiveness of Ni-P-La Alloy Coatings[J].稀土学报（英文版）,2006(z2):389-392. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%