Carbon black (CB) and carbon nanotubes (CNTs) were used as additives in phenolic resin.The effects of the additives and heat treatment temperature on the oxidation resistance and structure of carbon from the pyrolysed phenolic resin were investigated by differential scanning calorimetric.analysis,X-ray diffraction,scanning electron microscopy,and mercury intrusion porosimetry.It was observed that both CNTs and CB improved the graphitization degree and oxidation resistance of the pyrolytic carbons.The graphitization degree of carbons containing CNTs was higher than that of those with CB,but the oxidation resistance of the former was lower due to the higher porosity in the microstructure.An increase in the heat treatment temperature also resulted in an improvement in the graphitization degree and oxidation resistance of the carbons.
参考文献
| [1] | Emad Mohamed M.Ewais .Carbon Based Refractories[J].日本セラミックス协会学术论文志,2004(1310):517-532. |
| [2] | G. Z. Ruan;N. Li .Carbon pickup of interstitial free steel from Al_2O_3-C refractories[J].Ironmaking & Steelmaking: Products and applications,2004(4):342-344. |
| [3] | Wei Y W;Li N;Wu S J et al.Carbon pickup of interstitial free steel from low carbon content MgO-SiC refractories[J].Steel G-rips-Journal of Steel and Related Materials,2006,4:279-282. |
| [4] | A.S. Gokce;C. Gurcan;S. Ozgen .The effect of antioxidants on the oxidation behaviour of magnesia-carbon refractory bricks[J].CERAMICS INTERNATIONAL,2008(2):323-330. |
| [5] | Zhang S;Marriott N J;Lee W E .Thermochemistry and microstructures of MgO-C refractories containing various antioxidants[J].Journal of the European Ceramic Society,2001,21 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%