The effect of the ammonium molybdate concentration on the material removal rate(MRR)and surface quality in the preliminary chemical mechanical polishing(CMP)of a rough glass substrate was investigated using a silica-based slurry.Experimental results reveal that the ammonium molybdate concentration has a strong influence on the CMP behaviors of glass substrates.When the ammonium molybdate was added to the baseline slurry,polishing rates increased,and then decreased with a transition at 2 wt.%,and the root mean square(RMS)roughness decreased with increasing ammonium molybdate concentration up to 2 wt.%,after which it increased linearly up to 4 wt.%.The improvement in MRR and RMS roughness may be attributed to the complexation of hydrolysis products of the glass substrate with the ammonium molybdate so as to prevent their redeposition onto the substrate surface.It was found that there exists an optimal ammonium molybdate concentration at 2 wt.% for obtaining the highest MRR and the lowest RMS roughness within a particular polishing time.
参考文献
| [1] | Lei H,Lu H,Zhang P,et al.Sub-nanometer precision polishing of glass substrate.7th International Conference on Frontiers of Design and Manufacturing,Guangzhou,China,2006:445 |
| [2] | Zhang Z F,Lei H.Preparation of alpha-alumina/polymethacrylic acid composite abrasive and its CMP performance on glass substrate.Microelectron Eng,2008,85(4):714 |
| [3] | Zhu H L,Tessaroto L A,Sabia R et al.Chemical mechanical polishing(CMP)anisotropy in sapphire.Appl Surf Sci,2004,236(1-4):120 |
| [4] | Zantye P B,Kumar A,Sikder A K.Chemical mechanical planarization for microelectronics applications.Mater Sci Eng R:Reports,2004,45(3-6):89 |
| [5] | Lien C H,Guu Y H.Optimization of the polishing parameters for the glass substrate of STN-LCD.Mater Manuf Processes,2008,23(8):838 |
| [6] | Lee S H,Lu Z Y,Babu S V,et al.Chemical mechanical polishing of thermal oxide films using silica particles coated with ceria.Journal of Materials Research,2002,17(10):2744 |
| [7] | Song X L,Jiang N,Li Y K,et al.Synthesis of CeO2-coated SiO2 nanoparticle and dispersion stability of its suspension.Mater Chem Phys,2008,110(1):128 |
| [8] | Choi W,Mahajan U,Lee S M,et al.Effect of slurry ionic salts at dielectric silica CMP.J Electrochem Soc,2004,151(3):G185 |
| [9] | Shlishevskii B E,Miguskina Z A.Acceleration of glass polishing processes with chemical reagents.Soviet Journal of Optical Technology,1977,44(11):680 |
| [10] | Belkhir N,Bouzid D,Heroid V.Determination of the friction coefficient during glass polishing.Tribology Lett,2009,33(1):55 |
| [11] | Lee H,Park B,Jeong H.Mechanical effect of process condition and abrasive concentration on material removal rate profile in copper chemical mechanical planarization.Journal of Materials Processing Technology,2009,209(4):1729 |
| [12] | Abiade J T,Choi W,Singh R K.Effect ofpH on ceria-silica interactions during chemical mechanical polishing.Journal of Materials Research,2005,20(5):1139 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%