欢迎登录材料期刊网

材料期刊网

高级检索

This paper presents the design and implementation of a fully integrated multi-band RF receiver frontend for GNSS applications on L-band.A single RF signal channel with a low-IF architecture is adopted for multi-band operation on the RF section,which mainly consists of a low noise amplifier (LNA),a down-converter,polyphase filters and summing circuits.An improved cascode source degenerated LNA with a multi-band shared off-chip matching network and band switches is implemented in the first amplifying stage.Also,a re-designed wideband double balance mixer is implemented in the down conversion stage,which provides better gain,noise figure and linearity performances.Using a TSMC 0.18μm 1P4M RF CMOS process,a compact 1.27 GHz/1.575 GHz dualband GNSS frontend is realized in the proposed low-IF topology.The measurements exhibit the gains of 45 dB and 43 dB,and noise figures are controlled at 3.35 dB and 3.9 dB of the two frequency bands,respectively.The frontend model consumes about 11.8-13.5 mA current on a 1.8 V power supply.The core occupies 1.91 × 0.53 mm2 while the total die area with ESD is 2.45 × 2.36 mm2.

参考文献

[1] Ko J,Kim J,Cho S,et al.A 19-mW 2.6-mm2 L1/L2 dual-band CMOS GPS receiver.IEEE J Solid-State Circuits,2005,40(7):1414
[2] Chung T C,Chen C W,Chen O T C,et al.A multi-band RF frontend receiver for Bluetooth,WCDMA,and GPS applications.IEEE International Symposium on Micro-NanoMechatroincs and Human Science,2003:1175
[3] Abdelrahim T A,Elesseily T,Abdou A S,et al.A 12-mW fully integrated low-IF dual-band GPS receiver on 0.13-μm CMOS.IEEE International Symposium on Circuits and Systems,2007:3034
[4] Pizzarulli A,Montagna G,Pini M,et al.Reconfigurable and simultaneous dual band Galileo/GPS front-end receiver in 0.13 μm RFCMOS.IEEE Position,Location and Navigation Symposium,2008:846
[5] Detratti M,Lopez E,Perez E,et al.Dual-band RF receiver chipset for Galileo/GPS applications.IEEE Position,Location and Navigation Symposium,2008:851
[6] Moon Y,Cha S,Kim G,et al.A 26 mW dual-mode RF receiver for GPS/Galileo with LI/L1F and L5/E5a bands.International SoC Design Conference,2008:421
[7] Tan S.Development and thought of compass navigation satellite system.Journal of Astronautics,2008,29(2):391 (in Chinese)
[8] Grelier T,Dantepal J,Delatour A,et al.Initial observations and analysis of compass MEO satellite signals.Inside GNSS,May/June 2007:39
[9] Mirabbasi S,Martin K.Classical and modern receiver architectures.IEEE Commun Mag,2000,38(11):132
[10] Rudell J C,Ou J J,Cho T B,et al.A 1.9-GHz wide-band IF double conversion CMOS receiver for cordless telephone applications.IEEE J Solid-State Circuits,1997,32(i2):2071
[11] Crols J,Steyaert M S J.A single-chip 900 MHz CMOS receiver front-end with a high performance low-IF topology.IEEE J Solid-State Circuits,1995,30(12):1483
[12] Crols J,Steyaert M S J.Low-IF topologies for high-performance analog front ends of fully integrated receivers.IEEE Trans Circuits Syst Ⅱ:Analog and Digital Signal Processing,1998,45(3):269
[13] Li Z R,Zhuang Y Q,Li B,et al.A 2.4 GHz high-linearity lowphase-noise CMOS LC-VCO based on capacitance compensation.Journal of Semiconductors,2010,31 (7):075005
[14] Behzad R.RF microelectronics.Prentice Hall,1997
[15] Lee Y H.The design of CMOS radio-frequency integrated circuits.2nd ed.Cambridge University Press,2003
[16] Shaeffer D K,Lee T H.A 1.5-V,1.5-GHz CMOS low noise amplifier.IEEE J Solid-State Circuits,1997,32(5):745
[17] Goo J S,Ahn H T,Donald J L,et al.Design methodology for power-constrained low noise RF circuits.Workshop on Synthesis and System Integration of Mixed Technologies,2001:394
[18] Goo J S,Oh K H,Choi C H,et al.Guidelines for the power constrained design ofa CMOS tuned LNA.International Conference on Simulation of Semiconductor Processes and Devices,2000:269
[19] Leroux P,Janssens J,Steyaert M.A 0.8-dB NF ESD-protected 9-mW CMOS LNA operating at 1.23 GHz for GPS receiver.IEEE J Solid-State Circuits,2002,37(6):760
[20] Li B,Zhuang Y Q,Li Z R,et al.A 0.18 μm CMOS dual-band low noise amplifier for global navigation satellite system,Journal of Semiconductors,2010,31(12):125001
[21] Nguyen T K,Lee S G,Kang D K.A 900 MHz CMOS RF direct conversion receiver front-end with 3-dB NF and 30-kHz l/f noise corner.Asian Solid-State Circuits Conference,2005:349
[22] Terrovitis M T,Meyer R G.Noise in current-commutating CMOS mixers.IEEE J Solid-State Circuits,1999,34(6):772
[23] Van der Ziel A.Thermal noise in field-effect transistors.Proceedings of the IRE,1962,50(8):1808
[24] Tang C C,Lu W S,Van L D,et al.A 2.4-GHz CMOS downconversion doubly balanced mixer with low supply voltage.IEEE International Symposium on Circuits and Systems,2001:794
[25] Yu C,Yuan J S.Linearity and power optimization of a microwave CMOS Gilbert cell mixer.11th IEEE International Symposium on Electron Devices for Microwave and Optoelectronic Applications,2003:234
[26] Behbahani F,Kishigami Y,Leete J,et al.CMOS mixers and polyphase filters for large image rejection.IEEE J Solid-State Circuits,2001,36(6):873
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%