参考文献
| [1] | 刘新福,孙以材,刘东升,陈志永,张艳辉,王静.无测试图形薄层电阻测试仪及探针定位[J].半导体学报,2004(02):221-226. |
| [2] | 程树英,黄赐昌,陈岩清,陈国南.光电薄膜SnS的制备及其性能[J].半导体学报,2005(06):1173-1177. |
| [3] | Valdes L B.Resistivity measurements on germanium for transistors.Proceedings of the IRE,1954,42(2):420,1954. |
| [4] | Guise O,Marbach H,Yates J T,et al.Development and performance of the nanoworkbench:a four tip STM for conductivity measurements down to submicrometer scales.Review of Scientific Instruments,2005,76:045107,2005. |
| [5] | Li J C,Wang Y,Ba D C.Characterization of semiconductor surface conductivity by using microscopic four-point probe technique.Physics Procedia,2012,32:347,2012. |
| [6] | Wu B,Han Y,Peng G,et al.The electrode factor on the accuracy of electrical resistivity measurement in diamond anvil cell.Phys Status Solidi C,2011,8(5):1692,2011. |
| [7] | Wu B,Huang X,Han Y,et al.Finite element analysis of the effect of electrodes placement on accurate resistivity measurement in a diamond anvil cell with van der Pauw technique.J Appl Phys,2010,107:104903,2010. |
| [8] | Huang,Gao C,Li M,et al.Finite element analysis of resistivity measurement with four point probe in a diamond anvil cell.J Appl Phys,2007,101:064904,2007. |
| [9] | Zimney E J,Dommett G H B,RuoffR S,et al.Correction factors for 4-probe electrical measurements with finite size electrodes and material anisotropy:a finite element study.Measurement Science and Technology,2007,18:2067,2007. |
| [10] | Huang X,Gao C,Han Y,et al.Finite element analysis of resistivity measurement with van der Pauw method in a diamond anvil cell.Appl Phys Lett,2007,90:242102,2007. |
| [11] | Schroder D K.Semiconductor material and device characterization.New York:John Wiley & Sons,1990,1990. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%