针对等离子热障涂层构件的变形特点,在总结热障涂层热疲劳寿命相关文献研究成果的基础上,合理设计了平板和圆管试样的高温氧化与热疲劳试验.根据菲克定律,结合高温氧化实验数据建立粘接层Al贫化的数学模型.把粘接层Al浓度作为耦合氧化损伤的控制参量引入寿命预测模型,建立氧化损伤和热疲劳损伤耦合作用的等离子热障涂层寿命预测模型.寿命预测结果表明该寿命预测模型合理、方法可行.
参考文献
[1] | MILLER R A .Current status of thermal barrier coatings-an overview[J].Surface and Coatings Technology,1987,30(1):1-11.,1987. |
[2] | 韩萌,黄继华,陈树海.热障涂层应力与失效机理若干关键问题的研究进展与评述[J].航空材料学报,2013(05):83-98. |
[3] | SHEFFLER K D,GUPTA D K .Current status and future trends in turbine application of thermal barrier coatings[J].Journal of Engineering for Gas Turbines and Power,1988,110(4):605-609.,1988. |
[4] | 钟锦岩,牟仁德,何英,何利民.NiCoCrAlYHf涂层与一种Ni基单晶高温合金循环氧化行为研究[J].材料工程,2013(08):28-35. |
[5] | SCHLICHTING K W,PADTURE N P,JORDAN EH,et al .Failure modes in plasma-sprayed thermal barrier coatings[J].Materials Science and Engineering:A,2003,342(1):120-130.,2003. |
[6] | BUSSO E P,LIN J,SAKURAI S,et al .A mechanistic study of oxidation induced degradation in a plasma-sprayed thermal barrier coating system Part Ⅰ:model formulation[J].Acta Materialia,2001,49(9):1515-1528.,2001. |
[7] | BUSSO E P,LIN J,SAKURAI S,et al .A mechanistic study of oxidation-induced degradation in a plasma-sprayed thermal barrier coating system Part Ⅱ:life prediction model[J].Acta Materialia,2001,49(9):1529-1536.,2001. |
[8] | CHEN W R,WU X,DUDZINSKI D .Influence of thermal cycle frequency on the TGO growth and cracking behaviors of an APSTBC[J].Journal of Thermal Spray Technology,2012,21(6):1294-1299.,2012. |
[9] | KERREBROCK J L.Aircraft Engines and Gas Turbines[M].Cambridge,MA:MIT Press,1992.,1992. |
[10] | HE M Y,MUMM D R,EVANS A G .Criteria for the delamination of thermal barrier coatings:with application to thermal gradients[J].Surface and Coatings Technology,2004,185(2):184-193.,2004. |
[11] | DEMASI J T,SHEFFLER K D,ORITIZ M.Thermal Barrier Coating Life Prediction Model Development[R].NASA-CR182230,1989.,1989. |
[12] | EVANSA G,MUMMD R,HUTCHINSON J W,etal .Mechanisms controlling the durability of thermal barrier coatings[J].Progress in Materials Science,2001,46(5):505-553.,2001. |
[13] | EVANS A G,HE M Y,HUTCHINSON J W .Mechanics-based scaling laws for the durability of thermal barrier coatings[J].Progress in Materials Science,2001,46(3):249-271.,2001. |
[14] | HE M Y,EVANS A G,HUTCHINSON J W .The ratcheting of compressed thermally grown thin films on ductile substrates[J].Acta Materialia,2000,48(10):2593-2601.,2000. |
[15] | QIAN G.Fracture Analysis and Microstructural Modeling of Thermal Spray Coatings[D].New York:School of Mechanical Engineering,State University of New York,USA,1999.,1999. |
[16] | BRODIN H,ESKNER M .The influence of oxidation on mechanical and fracture behaviour of an air plasma-sprayed NiCoCrAlY bondcoat[J].Surface and Coatings Technology,2004,187(1):113-121.,2004. |
[17] | CHEN W R,WU X,MARPLE B R,et al .Oxidation and crack nucleation/growth in an air-plasma-sprayed thermal barrier coating with NiCrAlY bond coat[J].Surface and Coatings Technology,2005,197(1):109-115.,2005. |
[18] | EVANS H E,TAYLOR M P .Diffusion cells and chemical failure of MCrAlY bond coats in thermal-barrier coating systems[J].Oxidation of Metals,2001,55:17-34.,2001. |
[19] | 王亚梅.热障涂层破坏机理及寿命分析方法的研究[D].北京:北京航空航天大学,2009.,2009. |
[20] | CHE C,WU G Q,QI H Y,et al .Depletion model of aluminum in bond coat for plasma-sprayed thermal barrier coatings[J].Advanced Materials Research,2009,75 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%