使航空复合材料加筋板在湿热环境中(70℃、水浴)达到吸湿饱和状态,对普通加筋板(A型)和吸湿饱和加筋板(B型)进行压缩实验.两类加筋板的破坏形貌相似,主要是筋条的断裂、脱粘和壁板的分层、撕裂,但破坏位置显著不同,A型加筋板的破坏位置均在加筋板中部附近,而B型分别在靠近两端的部位破坏,表明B型加筋板的破坏位置具有不确定性.两类加筋板的屈曲形式均为筋条间壁板的屈曲和中间2根筋条的屈曲,但两类加筋板相同位置的失稳壁板的弯曲方向相反,说明湿热环境对失稳壁板的弯曲方向影响较大.B型加筋板在压缩载荷下仍存在后屈曲过程,湿热环境对加筋板的屈曲载荷影响较小,对破坏载荷影响较大,较A型加筋板相比两者分别下降了3.1％和22.2％.
参考文献
| [1] | 沈观林;胡更开.复合材料力学[M].北京:清华大学出版社,2006 |
| [2] | 蔡登安,周光明,王新峰,钱元,刘伟先.双向玻纤织物复合材料双轴拉伸载荷下的力学行为[J].材料工程,2014(05):73-77,85. |
| [3] | SANTIUSTE C;SANCHEZ-SAEZ S;BARBERO E .Residual flexural strength after low velocity impact in glass/polyester composite beams[J].Computers & Structures,2010,92(21):25-30. |
| [4] | Selvum Pillay;Uday K. Vaidya;Gregg M. Janowski .Effects of moisture and UV exposure on liquid molded carbon fabric reinforced nylon 6 composite laminates[J].Composites science and technology,2009(6):839-846. |
| [5] | 朱梅庄.复合材料结构设计手册[M].北京:航空工业出版社,2006 |
| [6] | 中国航空研究院.复合材料结构设计手册[M].北京:航空工业出版社,2001 |
| [7] | Ray BC .Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites[J].Journal of Colloid and Interface Science,2006(1):111-117. |
| [8] | KONG C W;LEE I C;KIM C G et al.Post-buckling and failure of stiffened composite panels under axial compression[J].Computers & Structures,1998,42(1):13-21. |
| [9] | KNIGHT N F;STARNES J H .Postbuckling behavior of selected curved stiffened graphite-epoxy panels loaded in compression[J].AIAA Journal,1988,26(3):344-352. |
| [10] | Adrian C. Orifici;Inigo Ortiz de Zarate Alberdi;Rodney S. Thomson;Javid Bayandor .Compression And Post-buckling Damage Growth And Collapse Analysis Of Flat Composite Stiffened Panels[J].Composites science and technology,2008(15/16):3150-3160. |
| [11] | 孔斌,叶强报,陈普会,柴亚南.复合材料整体加筋板轴压后屈曲的传载机制[J].复合材料学报,2010(05):142-149. |
| [12] | 孔斌,叶强,陈普会,柴亚南.复合材料整体加筋板轴压后屈曲失效表征[J].复合材料学报,2010(05):150-155. |
| [13] | 王菲菲,崔德刚,熊强,罗小强.复合材料加筋板后屈曲承载能力工程分析方法[J].北京航空航天大学学报,2013(04):494-497. |
| [14] | Patel, S.R.;Case S.W. .Durability of a graphite/epoxy woven composite under combined hygrothermal conditions[J].International Journal of Fatigue,2000(9):809-820. |
| [15] | 潘文革,矫桂琼,熊伟,管欣,杨杰,赵谋周.二维编织层压板湿热环境下冲击后压缩性能的实验研究[J].航空材料学报,2005(04):40-44. |
| [16] | 冯青,李敏,顾轶卓,刘洪新,张佐光.不同湿热条件下碳纤维/环氧复合材料湿热性能实验研究[J].复合材料学报,2010(06):16-20. |
| [17] | 曹东,张晓云,陆峰,刘建华.先进复合材料T300/5405综合环境实验谱的研究[J].材料工程,2014(7):73-78. |
| [18] | ASTM D5229/D5229M.Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials[S].US:ASTM,2004. |
| [19] | 杨序纲.复合材料界面[M].北京:化学工业出版社,2010 |
| [20] | OWENS G A;SCHOFIELD S E .Thermal cycling and mechanical property assessment of carbon fibre fabric reinforced PMR-15 polyimide laminates[J].Composites Science and Technology,1988,33(11):177-190. |
| [21] | Aying Zhang;Dihong Li;Haibao Lu;Dongxing Zhang .Qualitative separation of the effect of voids on the bending fatigue performance of hygrothermal conditioned carbon/epoxy composites[J].Materials & design,2011(10):4803-4809. |
| [22] | Mezghani, K. .Long term environmental effects on physical properties of vinylester composite pipes[J].Polymer Testing,2012(1):76-82. |
| [23] | Pei Sun;Yan Zhao;Yunfeng Luo;Lili Sun .Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite[J].Materials & design,2011(8/9):4341-4347. |
| [24] | 张利军,肇研,罗云烽,段跃新.湿热循环对CCF300/QY8911复合材料界面性能的影响[J].材料工程,2012(02):25-29,49. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%