采用高温形变热处理(TMT)+后续冷(热)处理的方法对新型超高强度钢(G33钢)进行处理,研究了不同工艺参数对G33钢微观组织及准静态(10-3s-1)拉伸力学性能的影响.结果表明:G33钢的最佳处理工艺为50％形变量的高温(1078℃)形变热处理+-73℃/1h冷处理+200℃/2h回火,此工艺下钢的屈服强度为1685MPa,极限抗拉强度为2130MPa,断后伸长率为14.0％.
参考文献
| [1] | 李杰;李志;颜鸣皋.高合金超高强度钢的发展[J].材料工程,2007(4):61-65. |
| [2] | 段春争;王敏杰;李士燕.深冷处理工艺对W6Mo5Cr4V2钢力学性能和微观组织的影响[J].材料工程,2008(6):40-43. |
| [3] | Yan LU;Jie SU;Junhua WANG;Gang XIE;Zhuoyue YANG.Effect of W on microstructure of high strength and toughness steels[J].金属学报（英文版）,2011(6):423-431. |
| [4] | LIQING CHEN;ZHOUYU ZENG;YANG ZHAO.Microstructures and High-Temperature Mechanical Properties of a Martensitic Heat-Resistant Stainless Steel 403Nb Processed by Thermo-Mechanical Treatment[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20143(3):1498-1507. |
| [5] | Rezaee, A.;Kermanpur, A.;Najafizadeh, A.;Moallemi, M..Production of nano/ultrafine grained AISI 201L stainless steel through advanced thermo-mechanical treatment[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201115(15):5025-5029. |
| [6] | DONG Lanfeng;ZHONG Yuexian;MA Qingxian;YUAN Chaolong;MA Lishen.Dynamic Recrystallization and Grain Growth Behavior of 20SiMn Low Carbon Alloy Steel[J].清华大学学报（英文版）,2008(05):609-613. |
| [7] | Amar K. De;David C. Murdock;Martin C. Mataya.Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction[J].Scripta materialia,200412(12):1445-1449. |
| [8] | B. Kim;E. Boucard;T. Sourmail.The influence of silicon in tempered martensite: Understanding the microstructure-properties relationship in 0.5-0.6 wt.% C steels[J].Acta materialia,2014:169-178. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%