对Inconel 740H合金管材在750℃进行500～3000h的无应力时效实验,采用热力学模拟,OM,FEG-SEM,显微硬度测定等方法研究了合金微观组织及显微硬度的变化趋势.结果表明:供货态(固溶处理)管材的合金成分及拉伸性能等均满足ASME要求,管材合格;长期时效后合金的主要析出相为γ'及M23C6,无η,ρ等有害相析出.随着时效时间的延长,γ'粒子的粗化速率较快,其规律符合LSW熟化理论,M23C6相尺寸变化不明显;合金的显微硬度呈现先上升后下降的变化趋势,但整体波动较小.长期时效后合金组织及显微硬度的变化表明Inconel 740H在750℃/3000h条件下的组织稳定性较好,可用于进一步进行持久等长时力学性能的检验.
参考文献
| [1] | R. Viswanathan;J.F. Henry;J. Tanzosh.U.S. Program on Materials Technology for Ultra-Supercritical Coal Power Plants[J].Journal of Materials Engineering and Performance,20053(3):281-292. |
| [2] | Shuangqun Zhao;Xishan Xie;Gaylord D. Smith.Microstructural stability and mechanical properties of a new nickel-based superalloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20031/2(1/2):96-105. |
| [3] | 赵双群,谢锡善,董建新.700℃超超临界燃煤电站用镍基高温合金Inconel 740/740H的组织与性能[C].第九届电站金属材料学术年会论文集,2011:278-288. |
| [4] | Chong Yan;Liu Zhengdong;Andy Godfrey;Liu Wei;Weng Yuqing.Microstructure evolution and mechanical properties of Inconel 740H during aging at 750 °C[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:153-164. |
| [5] | 符锐;林富生;赵双群;迟成宇.Inconel 740H主要强化元素对热力学平衡相析出行为的影响[J].动力工程学报,2013(5):405-412. |
| [6] | W.Z. Wang;H.U. Hong;I.S. Kim;B.G. Choi;H.W. Jeong;M.Y. Kim;C.Y. Jo.Influence of γ' and grain boundary carbide on tensile fracture behaviorsof Nimonic 263[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20091/2(1/2):242-245. |
| [7] | 肖旋;赵海强;王常帅;郭永安;郭建亭;周兰章.B和P对GH984合金组织和力学性能的影响[J].金属学报,2013(4):421-427. |
| [8] | Y. Yuan;Z.H. Zhong;Z.S. Yu;H.F. Yin;Y.Y. Dang;X.B. Zhao;Z. Yang;J.T. Lu;J.B. Yan;Y. Gu.Microstructural evolution and compressive deformation of a new Ni-Fe base superalloy after long term thermal exposure at 700 °C[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:364-369. |
| [9] | Busby JT;Hash MC;Was GS.The relationship between hardness and yield stress in irradiated austenitic and ferritic steels[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,20052/3(2/3):267-278. |
| [10] | Osamu Takakuwa;Yusuke Kawaragi;Hitoshi Soyama.Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress[J].Journal of surface engineered materials and advanced technology,20134(4):262-268. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%