简要回顾国内外固溶强化型高温钛合金材料的发展历史,分析英、美、俄等国的高温钛合金研究与应用情况及发展趋势.介绍国内自主研制、使用温度在550～ 650℃范围内的三种钛合金新材料及其相关技术发展,对国内高温钛合金材料进行初步梳理.参考国外高温钛合金研究、应用经验及发展趋势,结合国内实际情况,对国内高温钛合金材料体系的建立及完善提出具体建议,并展望国内高温钛合金近期研究重点和未来发展方向.
参考文献
| [1] | MOISEYEV V N.Titanium Alloys:Russian Aircraft and Aerospace Applications[M].Boca Raton,Florida:CRC Press,2006.,2006. |
| [2] | 蔡建明,李臻熙,马济民,黄旭,曹春晓.航空发动机用600℃高温钛合金的研究与发展[J].材料导报,2005(01):50-53. |
| [3] | KHOREV A I,KHOREV M A .Titanium alloys:application and perspectives of development[J].Titan,2005,1 |
| [4] | LEYEN S C,PETERS M.Titanium and Titanium Alloys[M].Weinheim:WILEY,2003.,2003. |
| [5] | 黄旭,李臻熙,黄浩.高推重比航空发动机用新型高温钛合金研究进展[J].中国材料进展,2011(06):21-27. |
| [6] | 曹春晓.航空用钛合金的发展概况[J].航空科学技术,2005(04):3-6. |
| [7] | FLOWER H M,SWANN P R,WESTD R F .Silieide precipitation in the Ti-Zr-Al-Si system[J].Metall Mater Trans:B,1971,2(12):3289-3297.,1971. |
| [8] | SINGH A K,RAMACHANDRA C,SINGH V .Orientation relationship between matrix phases and silicide S2 in alloy Ti-6Al-1.6Zr-3.3Mo-0.3Si[J].J Mater Sci Lett,1992,11(4):218-221.,1992. |
| [9] | NEAL D F,FOX S P.The influence of silicon and silicides on the properties of near-alpha titanium alloys[C]//FROES F H,CAPLAN I L,SAN D.Titanium'92 Science and Technology,California,June 29-July 2,1993:287-294.,1993. |
| [10] | CHO W,JONES J W,ALLISON J E,et al.Creep behavior of Ti-6242:the effect of microstructure and silicon content[C]//LACOMBE P,TRICOT R,BERANGER G.Sixth World Conference on Titanium,Société Francaise deMétallurgie,Cannes,June 6-9,1988:187-192.,1988. |
| [11] | DONLON W T,ALLISON J E,LASWCKI J V.The influence of thermal exposure on properties and microstructure of elevated temperature titanium alloys[C]//FROES F H,CAPLAN I L,SAN D.Titanium'92:Science and Technology,California,June 29-July 2,1993:295-302.,1993. |
| [12] | RAMACHANDRA C,SINGH V .Orientation relationship between α' titanium and silicide S2 in alloy Ti-6Al-5Zr-0.5Mo-0.25Si[J].MetallMaterTrans:A,1985,16(3):453-455.,1985. |
| [13] | MADSEN A,GHONEM H .Separating the effects of Ti3Al and silicide precipitates on the tensile and crack growth behavior at room temperature and 593℃ in a near-alpha titanium alloy[J].J MaterEng Perform,1995,4(3):301-307.,1995. |
| [14] | 赵亮,刘建荣,王清江,杨锐.析出相对Ti60钛合金蠕变和持久性能的影响[J].材料研究学报,2009(01):1-5. |
| [15] | RAMACHANDRA C,SINGH A K,SARMA G M K .Microstructural characterization of near-α titanium alloy Ti6Al-4Sn-4Zr-0.70Nb-0.50Mo-0.40Si[J].Metall Trans:A,1993,24(6):1273-1280.,1993. |
| [16] | FLOWER H M,SWANN P R,WESTD R F .Silicide precipitation in the Ti-Zr-Al-Si system[J].Metall Mater Trans:B,1971,2(12):3289-3297.,1971. |
| [17] | SRIDHAR G,SARMA D S .Structure and properties of a near-α titanium alloy after β solution treatment and aging at 625℃[J].Metall Trans:A,1988,19:3025-3033.,1988. |
| [18] | CROSSLEY F A .Titanium-rich end of the titanium-aluminum equilibrium diagram[J].Trans TMS-AIME,1966,263 |
| [19] | BLANKBURN M J .The ordering transformation in titanium aluminum alloys containing up to 25 at.pet aluminum[J].Trans AIME 1967,1967,293 |
| [20] | L】U】TJERING G,WEISSMANN S .Mechanical properties of age-hardened titanium alloys[J].Acta Metall,1970,18 |
| [21] | 毛小南,赵永庆,杨冠军.国外航空发动机用钛合金的发展现状[J].稀有金属快报,2007(05):1-7. |
| [22] | 魏寿庸,何瑜,王青江,刘羽寅.俄航空发动机用高温钛合金发展综述[J].航空发动机,2005(01):52-58. |
| [23] | BACHE M R .A review of dwell sensitive fatigue in titanium alloys:the role of microstructure,texture and operating conditions[J].Int J Fatigue,2003,25 |
| [24] | EVANS W J,BACHEMR,EVANS W J .Dwell-sensitive fatigue in a near alpha-titanium alloy[J].J Mater Sci Lett,1987,6 |
| [25] | BANIA P J,EYLON D,EVANS W J .Dwell-sensitive fatigue in a near alpha-titanium alloy[J].Metall Trans:A,1978,9 |
| [26] | EVANS W J .The influence of microstructure on dwell sensitive fatigue in a near alpha titanium alloy[J].Scripta Metall,1987,21 |
| [27] | IRVING B .Sparks begin to fly in nonconventional friction welding and surfacing[J].Welding J,1993,72(5):37-40.,1993. |
| [28] | HALL G S,SEAGLE S R,BOMBERGER H B.Improvement in high-temperature tensile and creep properties of titanium alloys[C]//Proceedings of the Second International Conference:Titanium Science and Technology,Massachusetts,May 2-5,1973:2141-2150.,1973. |
| [29] | Jr GIGLIOTTI M F X,ROWER G.High strength oxidation resistant alpha titanium alloy:US,4906436[P].1990-03-06【2014-04-03】.,1990. |
| [30] | OHYAMA H,YAMAMOTO K J,NAKAYAMA T .New high-temperature titanium alloy and anti-oxidation surface treatment[J].Kobe Steel Eng Reports,1997,47(2):62-64.,1997. |
| [31] | YAMAMOTO T .Creep and fatigue properties in modified IMI834 high-temperature titanium alloy[J].Kobe Steel Eng Reports,1993,43(2):103-106.,1993. |
| [32] | ROWER G,KOCH E F,BRODERICK,et al.Solidification structure and dispersoids in rapidly solidified Ti-Al-Sn-Zr-Er-B alloys[C]//Rapidly Solidified Materials,Metals Park,OH,1987:131-140.,1987. |
| [33] | GIGLIOTTI M F X,WASIELEWSKI G E,ROWER G,et al.Rapidly solidified titanium alloys containing fine dispersoids[C]//Rapidly Solidified Materials,Metals Park,OH,1987:141-151.,1987. |
| [34] | SNOW D B,GIAMEI A.Rare earth oxide dispersions in rapidly solidified titanium-aluminum alloys[C]//Rapidly Solidified Materials,Metals Park,OH,1987:153-164.,1987. |
| [35] | SASTRY S M L,PENG T C,BECKERMAN L P .Structure and properties of rapidly solidified dispersion strengthened titanium alloys:part Ⅱ:tensile and creep properties[J].Metall Trans:A,1984,15 |
| [36] | GIGLIOTTI M F X,WOODFIELD A P .The role of rare earth dispersoids and process route on the low cycle fatigue behavior of a rapidly solidified powder metallurgy titanium alloy[J].Metall Trans:A,1993,24 |
| [37] | 赵永庆.高温钛合金研究[J].钛工业进展,2001(01):33-39. |
| [38] | 李阁平 .高温钛合金中稀土相的形貌、结构、形成及微观力学行为[D].中国科学院金属研究所,1995. |
| [39] | 李少强.快速凝固粉末冶金Ti60钛合金的制备及显微组织研究[D].沈阳:中国科学院金属研究所,2010.(LI S Q.The Preparation and Microstructure Research of Rapidly Solidified Powder Metallurgy Ti60 Alloy[D].Shenyang:Institute of Metal Research,Chinese Academy of Sciences,2010.),2010. |
| [40] | 李东,刘羽寅,万晓景 .钛合金热稳定性研究Ⅰ:Ti3X相形成的电子浓度规律[J].金属学报,1984,20(6):A375-382.(LI D,LIU Y Y,WAN X J.On the thermal stability of Ti alloys Ⅰ:the electron concentration rule for formation of Ti3 X-phase[J].Acta Metallurgica Sinica,1984,20 (6):A375-382.),1984. |
| [41] | 李东,刘羽寅,万晓景 .钛合金热稳定性研究Ⅰ:Ti3X相形成的电子浓度规律[J].金属学报,1984,20(6):A375-382.(LI D,LIU Y Y,WAN X J.On the thermal stability of Ti alloys Ⅰ:the electron concentration rule for formation of Ti3 X-phase[J].Acta Metallurgica Sinica,1984,20 (6):A375-382.),1984. |
| [42] | 李东,刘羽寅 .钛合金热稳定性研究Ⅱ:过渡族元素在Ti3X相形成中的行为[J].金属学报,1984,20(6):A384-389.(LI D,LIU Y Y.On the thermal stability of Ti alloys Ⅱ:the behaviour of transition elements in Ti3X-phase formation[J].Acta Metallurgica Sinica,1984,20 (6):A384-389.),1984. |
| [43] | 李东,刘羽寅 .钛合金热稳定性研究Ⅱ:过渡族元素在Ti3X相形成中的行为[J].金属学报,1984,20(6):A384-389.(LI D,LIU Y Y.On the thermal stability of Ti alloys Ⅱ:the behaviour of transition elements in Ti3X-phase formation[J].Acta Metallurgica Sinica,1984,20 (6):A384-389.),1984. |
| [44] | 李东,万晓景 .钛合金热稳定性研究Ⅲ:热稳定性判据及其应用[J].金属学报,1984,20(6):A391-397.(LI D,WAN X J.On the thermal stability of Ti alloys Ⅲ:the criterion for thermal stability and its application[J].Acta Metallurgica Sinica,1984,20 (6):A391-397.),1984. |
| [45] | 李东,万晓景 .钛合金热稳定性研究Ⅲ:热稳定性判据及其应用[J].金属学报,1984,20(6):A391-397.(LI D,WAN X J.On the thermal stability of Ti alloys Ⅲ:the criterion for thermal stability and its application[J].Acta Metallurgica Sinica,1984,20 (6):A391-397.),1984. |
| [46] | HU Q M,XU D S,LID .First-principles investigations of the solute-vacancy interaction energy and its effect on the creep properties of α-titanium[J].Philos Mag:A,2001,81 |
| [47] | RUSSO P A,YU K O.Effect of Ni,Fe and primary α on the creep of alpha-beta processed and annealed Ti-6Al-2Sn-4Zr-2Mo-0.09Si[C]//Proceedings of the Ninth World Conference on Titanium:Titanium'99 Science and Technology,St Petersburg,Russia,June 7-11,1999:596-603.,1999. |
| [48] | RUSSO P A,WOOD J R,BROSIUS.Influence of Ni and Fe on the creep of beta annealed Ti6242S[C]//Proceedings of the Ninth World Conference on Titanium:Titanium'95 Science and Technology,Birmingham,UK,October 22-26,1995:1075-1082.,1995. |
| [49] | MIHRA H,GHOSAL P,NANDY T K,et al .Influence of Fe and Ni on creep of near α-Ti alloy IMI834[J].Mater Sci Eng:A,2005,399 |
| [50] | THIEHSEN K E,KASSNEER M E,POLLARD J,et al .The effect of nickel,chromium and primary alpha phase on the creep behavior of Ti6242Si[J].Metall Trans:A,1993,24 |
| [51] | RAYES H W,VISWANATHAN G B,MILLS M J .Creep behavior of Ti-6Al-2Sn-4Zr-2Mo Ⅰ:the effect of nickel on creep deformation and microstructure[J].Acta Mater,2002,50 |
| [52] | VISWANATHAN G B,KARTHIKEYAN S K,HAYES R W,et al .Creep behavior of Ti-6Al-2Sn-4Zr-2Mo Ⅱ:mechanism of deformation[J].Acta Mater,2002,50 |
| [53] | HU Q M,XU D S,YANG R,et al .First-principles investigations of ordering in binary α-Ti solid solutions[J].Philos Mag,2003,83 |
| [54] | IMI829-data sheet[EB/OL].【2014-04-15】.Titanium Metals Corporation.http://www.timet.com/datasheetand-literature.,2014. |
| [55] | КОЛАЧЕЬБА,等.各国钛合金[M].王金友,马济民,蔡建明,等译.北京:北京航空材料研究院,2005.(КОЛАЧЕЬБА,,2005. |
| [56] | et al.Titanium Alloys of Various Countries[M].Beijing:Beijing Institute of Aeronautical Materials,2005.),2005. |
| [57] | 航空材料应用手册:第五卷:铸造铝合金、镁合金及钛合金[M].北京:北京航空材料研究院,1996.(Handbook of Aeronautical Materials Application:Vol 5:Casting Aluminum Alloys,Magnesium Alloys and Titanium Alloys【M】.Beijing:Beijing Institute of Aeronautical Materials,1996.),1996. |
| [58] | L】U】TJERING G,LEVIN I,BRUN M,et al.Microstructure and mechanical properties of the Russian high-temperature alloy BT25y[C]//Proceedings of the Ninth World Conference on Titanium:Titanium'95 Science and Technology,UK,0ctober 22-26,1995:1050-1057.,1995. |
| [59] | ZHANG S Z,LI G P,WANG Q J,et al .Effect of carbon on the upper (alpha + beta) phase field of titanium alloy Ti-5.6Al-4.8Sn-2Zr-1Mo-0.35Si[J].Mater Sci Technol,2004,20 |
| [60] | 王清江,刘建荣,杨锐,等.一种高热强性、高热稳定性的高温钛合金的热加工和热处理方法:中国,ZL200710011771.0[P].2009-12-09[2014-04-13].(WANG Q J,LIU J R,YANG R,et al.Hot deformation and heat treatment methods for a high temperature titanium alloy with high heat-resistance and high thermal stability:China,ZL200710011771.0[P].2009-12-09[2014-04-13]),2009. |
| [61] | 朱绍祥.同晶β稳定元素对高温钛合金显微组织及抗氧化性能的影响[D].沈阳:沈阳大学,2008.(ZHU S X.Effect of Isomorphous β Stabilizing Elements on the Microstructure and Anti-oxidizing Property of a Hightemperature Titanium Alloy Ti60A[D].Shenyang:Shenyang University,2008.),2008. |
| [62] | LIU J R,LI S X,DONG L,et al .Effect of aging on fatigue crack growth behavior of a high temperature titanium alloy[J].Mater Trans,2004,45(5):1577-1585.,2004. |
| [63] | WILLIAMS J C,L(U)TJERING G.The effect of slip length and slip character on the properties of titanium alloys[C]//Proceedings of the Ninth World Conference on Titanium:Titanium'80 Science and Technology,Japan,May 19-22,1980:671-681.,1980. |
| [64] | GERMAIN L,GEY N,HUMBRT M,et al .Texture heterogeneities induced by subtransus processing of near α titanium alloys[J].Acta Mater,2008,56 |
| [65] | GLAVICIC M G,BARTHA B B,JHA S K,et al .The origins of microtexture in duplex Ti alloys[J].Mater Sci Eng:A,2009,513 |
| [66] | RUGG D,FURRER D,BREWITT N.Textures in Titanium Alloys-an Industrial Perspective on Deformation,Transformation and Properties[M]//Materials Processing and Texture:Ceramic Transactions,New York:Wiley,2008:521-532.,2008. |
| [67] | GEY N,BOCHER P,UTA E,et al .Texture and microtexture variations in a near-α titanium forged disk of bimodalmicrostructure[J].ActaMater,2012,60:2647-2655.,2012. |
| [68] | SACKETT E E,GERMAIN L,BACHE M R .Crystal plasticity,fatigue crack initiation and fatigue performance of advanced titanium alloys[J].Int J Fatigue,2007,29 |
| [69] | 杨丽娜.Ti60合金保载疲劳行为及损伤机制研究[D].沈阳:中国科学院金属研究所,2013.(YANG L N.Dwell Fatigue Behavior and Damage Mechanism of Ti60 Alloy[D].Shenyang:Institute of Metal Research,Chinese Academy of Sciences,2013.),2013. |
| [70] | GERMAIN L,GEY N,HUMBRT M,et al .Analysis of sharp microtexture heterogeneities in a bimodal IMI834 billet[J].ActaMater,2005,53 |
| [71] | BACHE M R,COPE M,DAVIESH M,et al .Dwell sensitive fatigue in a near alpha titanium alloy at ambient temperature[J].Int J Fatigue,1997,19 |
| [72] | PILCHAK A L .A simple model to account for the role of microtexture on fatigue and dwell fatigue lifetimes of titanium alloys[J].Scripta Mater,2014,74 |
| [73] | BOYER R,WELSCH G,COLLINHS E W.Materials Properties Handbook:Titanium Alloys[M].Materials Park,OH:ASM International,1994:377.,1994. |
| [74] | Ti1100-data sheet[EB/OL].【2014-04-15】.Titanium Metals Corporation.http://www.timet.com/datasheet-and-literature.,2014. |
| [75] | IMI834-data sheet[EB/OL].【2014-04-15】.Titanium Metals Corporation.http://www.timet.com/datasheet-and-literature.,2014. |
| [76] | KOSING O E,SCHART R,SCHMUHL.Design improvements of E J200 HP compressor design:from design verification engine to a future all blisk version[C]//Proceedingof ASME TURBO EXPO2001,New Orleans,Louisiana,2001:1-6.,2001. |
| [77] | 陈志勇 .Ti-60钛合金电子束焊接接头的显微组织、力学性能与变形行为[D].中国科学院金属研究所,2008. |
| [78] | CHEN Z Y,WANG Q J,LIU J R,et al.Microstructure and mechanical property of linear friction welding of a near alpha titanium alloy Ti60[C]//Proceedings of the 12thWorld Conference on Titanium,Beijing,Sci Press,June 19-24,2011:1685-1689.,2011. |
| [79] | ZHU L G,HU Q M,YANGR,etal .Binding of an oxide layer to a metal:the case of Ti (10-10)/TiO2 (100)[J].J Phys Chem C,2012,116 |
| [80] | ZHU L G,HU Q M,YANG R,et al .Atomic-scale modeling of the dynamics of titanium oxidation[J].J Phys Chem C,2012,116 |
| [81] | ZENG W D,ZHOU Y G .The influence of microstructure on dwell sensitive fatigue in Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy[J].Mater Sci Eng:A,2000,290:33-38.,2000. |
| [82] | SINHA V,MILLS M J,WILLIAMS J C .Determination of crystallographic orientation of dwell-fatigue fracture facets in Ti-6242 alloy[J].J Mater Sci,2007,42(19):8334-8341.,2007. |
| [83] | KIRANE K,GHOSH S .A cold dwell fatigue crack nucleation criterion for polycrystalline Ti-6242 using grain-level crystal plasticity FE Model[J].Int J Fatigue,2008,30(12):2127-2139.,2008. |
| [84] | LEFRANC P,DOQUET V,GERLAND M,et al .Nucleation of cracks from shear-induced cavities in an α/β titanium alloy in fatigue,room-temperature creep and dwell-fatigue[J].Acta Mater,2008,56(16):4450-4457.,2008. |
| [85] | GERLAND M,LEFRANC P,DOQUETV,etal .Deformation and damage mechanisms in an α/β 6242 Ti alloy in fatigue,dwell-fatigue and creep at room temperature.Influence of internal hydrogen[J].Mater Sci Eng:A,2009,507:132-143.,2009. |
| [86] | SINHA V,MILLS M J,WILLIAMS J C .Understanding the contributions of normal-fatigue and static loading to the dwell fatigue in a near-alpha titanium alloy[J].Metall Mater Trans:A,2004,35 |
| [87] | SINHA V,SPWART J E,MILLS M J,et al .Observations on the faceted initiation site in the dwell-fatigue tested Ti6242 alloy:crystallographic orientation and size effects[J].Metall Mater Trans:A,2006,37 |
| [88] | KASSNER M E,KOSAKA Y,HALL J S .Low-cycle dwell-time fatigue in Ti-6242[J].Metall Mater Trans:A,1999,30 |
| [89] | MCBAGONLURI F,AKPAN E,MERCER C,et al .An investigation of the effects of microstructure on dwell fatigue crack growth in Ti-6242[J].Mater Sci Eng:A,2005,405 |
| [90] | THOMSEN M L,HOEPPNER D W .The effect of dwell loading on the strain accumulation behavior of titanium alloys[J].Int J Fatigue,1998,20(4):309-317.,1998. |
| [91] | EYLON D,ROSENBLUM M R .Effects of dwell on hightemperature low-cycle fatigue of a titanium alloy[J].Metall Trans:A,1982,13 |
| [92] | SHEN W,SOBOYEJO W O,SOBOYEJO A B O .An investigation on fatigue and dwell-fatigue crack growth in Ti-6Al-2Sn-4Zr-2Mo-0.1Si[J].Mech Mater,2004,36 |
| [93] | DOQUET V,de GREEF V .Dwell-fatigue of a titanium alloy at room temperature under uniaxial or biaxial tension[J].Int J Fatigue,2012,38 |
| [94] | EVANS W J .Dwell sensitive fatigue in a near alpha titanium alloy[J].Journal of Mater Sci Lett,1987,6 |
| [95] | EVANS W J,BACHE M R .Dwell-sensitive fatigue under biaxial loads in the near-alpha titanium-alloy IMI685[J].Int J Fatigue,1994,16(7):443-452.,1994. |
| [96] | 熊艳才.精密铸造技术在航空工业中的应用和发展[J].航空制造技术,2008(22):32-35. |
| [97] | 南海,赵嘉琪,黄东,等.钛合金精铸件在航空工业中的应用[EB/OL].. |
| [98] | http://www.doc88.com/p687602328053.html.20-27.(NAN H,ZHAO J Q,HUANGD,etal.Application of titanium alloy precision castings in aviation industry[EB/OL]..http://www.doc88.com/p-687602328053.html.20-27. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%