三维碳纤维增韧碳化硅陶瓷基复合材料(3D-Gf/SiC)因其各种优异性能已在各领域广泛应用.针对国内外研究现状,总结了三维编织复合材料特性、3D-Cf/SiC的最新制备工艺与界面问题以及Gf/SiC作为高温热结构材料和支撑结构材料的应用现状.最后展望了3D-Cf/SiC的发展趋势并指出对3D-Cf/SiC的研究将一直是碳化硅陶瓷基复合材料界研究的重点和难点.
参考文献
| [1] | 翟海涛,张正义 .基于碳/碳化硅基复合材料的研究与应用[J].制造技术研究,2012,4(2):42,2012. |
| [2] | 李力.Cf/SiC制动材料摩擦磨损性能的研究[J].热加工工艺,2011(20):92-95. |
| [3] | 张美忠,李贺军,李克智.三维编织复合材料的力学性能研究现状[J].材料工程,2004(02):44-48. |
| [4] | 李建章 .航空发动机热端部件模拟环境下3D C/SiC的微结构演变与失效机制[D].西北工业大学,2006. |
| [5] | 李嘉禄.三维纺织复合材料增强体结构和树脂复合固化技术[J].航天返回与遥感,2008(04):55-61. |
| [6] | 王宝来 .三维编织复合材料的力学性能和尺寸效应研究[D].哈尔滨工业大学,2009. |
| [7] | 汪昭君 .新型三维编织体结构的开发研究[D].江南大学,2010. |
| [8] | 朱梦蝶,张立泉.加筋三维织物的编织工艺:中国,CN1570233A[P].2005,2005. |
| [9] | Li W,Xiang Y,Wang S,et al .Ablation behavior of three-dimensional braided C/SiC composites by oxyacetylene torch under different environments[J].Ceram Int,2013,39(1):463,2013. |
| [10] | 万峰,罗发,周万城,朱冬梅,史毅敏.先驱体转化法制备连续纤维增韧陶瓷基复合材料的研究[J].材料导报,2012(23):134-137,141. |
| [11] | Zhong W,Wang S,Li J,et al .Design of carbon fiber reinforced boron nitride matrix composites by vacuum-assisted polyborazylene transfer molding and pyrolysis[J].J Eur Ceram Soc,2013,33(15):2979,2013. |
| [12] | Naslain R.CVI-Composites[M]//Warren Red.Ceramic Matrix Composites.New York:Hall,1992:199,1992. |
| [13] | 张立同.纤维增韧碳化硅陶瓷复合材料--模拟、表征与设计[M].北京:化学工业出版社,2009:26,2009. |
| [14] | 徐永东,张立同,成来飞,等 .CVI法制备三维碳纤维增韧碳化硅复合材料[J].硅酸盐学报,1996,24(5):485,1996. |
| [15] | 刘杰,李海滨,刘小瀛.3D针刺C/SiC复合材料螺栓的低成本制备及力学性能[J].航空学报,2013(07):1724-1730. |
| [16] | Bae J,Cho K,Yoon D,et al .Highly efficient densification of carbon fiber-reinforced SiC-matrix composites by melting infiltration and pyrolysis using polycarbosilane[J].Ceram Int,2013,39(5):5623,2013. |
| [17] | Ivekovi(c)A,Dra(z)i(c)G,Novak S .Ivekovi(c)A,Dra(z)i(c)G,Novak S.Densification of a SiC-matrix by electrophoretic deposition and polymer infiltration and pyrolysis process[J].J Eur Ceram Soc,2011,31(5):833,2011. |
| [18] | 孙明,邱海鹏,焦健,等 .PIP法制备陶瓷基复合材料构件的弯曲性能研究[J].稀有金属材料与工程,2011,40(1):631,2011. |
| [19] | Zhou C,Zhang C,Hu H,et al .Preparation of 3D-Cf/SiC composites at low temperatures[J].Mater Sci Eng A,2008,488(1):569,2008. |
| [20] | Fitzer E,Gadow R .Fiber-reinforced silicon carbide[J].Am Ceram Soc Bull,1986,65(2):326,1986. |
| [21] | 周海军,董绍明,丁玉生,等 .碳化硅粉体对熔融渗硅法制备Cf/SiC复合材料结构的影响[J].人工晶体学报,2009,38:119,2009. |
| [22] | 杨会永 .气相渗硅制备3D Cf/SiC的结构、性能及界面调控研究[D].国防科学技术大学,2011. |
| [23] | 殷晓光,马天,李正操,苗伟.3D-Cf/SiC复合材料的弯曲强度及热膨胀性能分析[J].原子能科学技术,2010(z1):363-366. |
| [24] | Nannetti C A,Riccardi B,Ortona A,et al .Development of 2D and 3D Hi-Nicalon fibres/SiC matrix composites manufactured by a combined CVI-PIP route[J].J Nuclear Mater,2002,307 |
| [25] | 余林 .三维针刺碳/碳化硅摩擦材料的制备及性能[D].西北工业大学,2007. |
| [26] | 刘海韬,程海峰,王军,唐耿平.SiCf/SiC复合材料界面相研究进展[J].材料导报,2010(01):10-14,30. |
| [27] | Wang H,Zhou X,Yu J,et al .Fabrication of SiCf/SiC composites by chemical vapor infiltration and vapor silicon infiltration[J].Mater Lett,2010,64(15):1691,2010. |
| [28] | Yu H,Zhou X,Zhang W,et al .Mechanical behavior of SiCf/SiC composites with alternating PyC/SiC multilayer interphases[J].Mater Des,2013,44 |
| [29] | 张玉峰,郭景坤,诸培南,等 .纤维涂层对复合材料力学性能的影响[J].无机材料学报,1995,10(2):231,1995. |
| [30] | 袁起立,尹建平,姜勇刚.连续纤维增强陶瓷基复合材料界面研究进展[J].高科技纤维与应用,2007(01):23-27,37. |
| [31] | Nakano K .Fabrication and characterization of three-dimensional carbon fiber reinforced silicon carbide and silicon nitride composites[J].J Am Ceram Soc,1995,78(10):2811,1995. |
| [32] | Zheng G,Sano H,Suzuki K,et al .A TEM study of microstructure of carbon fiber/polycarbosilane-derived SiC composites[J].Carbon,1999,37(12):2057,1999. |
| [33] | 朱云洲,黄政仁,董绍明,袁明,江东亮.PyC/SiC界面相对PIP法制备3D HTA C/SiC复合材料性能的影响[J].新型炭材料,2007(04):327-331. |
| [34] | Dong S,Wen H .Preparation of oxidation protective SiC coatings for C/SiC composites by pulsed chemical vapor deposition[J].J Ceram Process Res,2009,10(3):285,2009. |
| [35] | Schmidt S,Beyer S,Knabe H,et al .Advanced ceramic matrix composite materials for current and future propulsion technology applications[J].Acta Astronautica,2004,55(3):409,2004. |
| [36] | 马彦.PIP法Cf/SiC复合材料组成、结构及性能高温演变研究[D].长沙:国防科学技术大学,2011,2011. |
| [37] | Kaneda H,Naitoh M,Nakagawa T,et al.Manucturing and optical testing of 800 nm lightweight all C/SiC optics[C]//Conterence on Material Technolgies and Applications to Optics,Structures,Components,and Sub-Systems.San Diego,2013,2013. |
| [38] | 王生朝.Cf/SiC复合材料的应用研究进展[J].材料科学与工程学报,2007(03):489-492. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%