电解液微弧碳氮化技术是近年来在微弧氧化技术上发展起来的一种新型的表面处理技术,可应用于包括Al、Ti、Fe、Mg等金属及其合金的表面改性.综述了电解液微弧碳氮化技术的基本原理以及国内外最新的研究进展.主要讨论工艺参数包括电解液组成以及电参数等对膜层质量的影响;分析了不同基体材料上成膜的结构和成分;在此基础上,进一步讨论了膜层硬度、耐磨损以及耐腐蚀性能.最后,对该技术的进一步发展趋势进行了展望.
参考文献
| [1] | Yerokhin A L;Leyland A;Matthews A et al.Plasma electrolysis for surface engineering[J].Surface and Coatings Technology,1999,122(2-3):73. |
| [2] | 关永军,夏原.等离子体电解沉积的研究现状[J].力学进展,2004(02):237-250. |
| [3] | 魏同波,田军.液相等离子体电沉积表面处理技术[J].材料科学与工程学报,2003(03):450-455. |
| [4] | Lazarenko B;Grosu F;Bologa M .Convective heat-transfer enhancement by electric fields[J].Int J Heat Mass Transf,1975,18(12):1433. |
| [5] | Duradzhy V;Bryantsev I .Metal heating in electrolytic plasma[J].Elektron Obrab Mater Russian,1977,18(01):45. |
| [6] | 李杰,沈德久,王玉林,田野.液相等离子体电解渗透技术[J].金属热处理,2005(09):63-67. |
| [7] | Li XM;Han Y .Porous nanocrystalline Ti(CxN1-x) thick films by plasma electrolytic carbonitriding[J].Electrochemistry communications,2006(2):267-272. |
| [8] | Nie X.;Wilson A.;Yerokhin AL.;Leyland A.;Matthews A.;Tsotsos C. .Characteristics of a plasma electrolytic nitrocarburising treatment for stainless steels[J].Surface & Coatings Technology,2001(2/3):135-142. |
| [9] | Belkin P;Kusmanov S;Naumov A.Anodic plasma electrolytic nitrocarburizing of low-carbon steel[A].Wuhan,2013:31. |
| [10] | Belkin P;Naumov A;Shadrin S.Anodic plasma electrolytic saturation of steels by carbon and nitrogen[A].Wuhan,2013:37. |
| [11] | M. Aliofkhazraei;M. Salasi;A. Sabour Rouhaghdam;P. Taheri .Electrochemical study of nanocrystalline plasma electrolytic carbonitriding of CP-Ti[J].Anti-Corrosion Methods and Materials,2007(6):367-372. |
| [12] | Li Xinmei;Han Yong;Li Yinsuo .Synthesis of nanocrystalline Ti (CxN1-x) thick films on titanium by plasma electrolytic carbonitriding[J].Surface and Coatings Technology,2007,201(9-11):5326. |
| [13] | 李新梅,刘炳,孙文磊,憨勇,孙耀宁.电解液组成及电参数对Ti_6Al_4V表面微弧碳氮化改性的影响[J].硅酸盐学报,2010(01):131-136. |
| [14] | Tarakci M;Korkmaz K;Gencer Y;Usta M .Plasma electrolytic surface carburizing and hardening of pure iron[J].Surface & Coatings Technology,2005(2/3):205-212. |
| [15] | 李杰,沈德久,王玉林,刘凯.液相等离子体电解碳氮共渗层形成条件的初步探索[J].中国表面工程,2005(04):31-33. |
| [16] | 李杰 .液相等离子体电解碳氮共渗技术研究[D].燕山大学,2005. |
| [17] | Tsotsos C;Yerokhin A;Wilson A et al.Tribological evaluation of AISI 304 stainless steel duplex treated by plasma electrolytic nitrocarburising and diamond-like carbon coating[J].WEAR,2002,253(09):986. |
| [18] | 薛文斌,金乾,朱庆振,吴晓玲.不锈钢在甘油体系中等离子体电解渗碳层特性研究[J].航空材料学报,2010(04):38-42. |
| [19] | Mofidi S H H;Aliofkhazraei M;Rouhaghdam A S et al.Improvement of surface characteristics by electroplating hard chromium coating post treated by nanocrystalline plasma electrolytic carbonitriding[J].PLASMA PROCESSES AND POLYMERS,2009,6:S297. |
| [20] | Karimi Zarchi M;Shariat M H;Dehghan S A et al.Characterization of nitrocarburized surface layer on AISI 1020 steel by electrolytic plasma processing in an urea electrolyte[J].J Mater Res Techn,2013,2(03):213. |
| [21] | 杨群 .中碳钢液相等离子体电解碳氮共渗的研究[D].南京理工大学,2012. |
| [22] | 柳永康,谢发勤,胡宗纯,吴向清.时间和电压对TC4合金表面等离子碳氮共渗层的影响[J].中国表面工程,2007(05):37-40. |
| [23] | Aliofkhazraei M;Rouhaghdam AS;Sabouri M .Effect of frequency and duty cycle on corrosion behavior of pulsed nanocrystalline plasma electrolytic carbonitrided CP-Ti[J].Journal of Materials Science,2008(5):1624-1629. |
| [24] | 何翔,郝英杰.电解液微弧放电制备氮化铝陶瓷膜研究[J].兵器材料科学与工程,2011(05):14-17. |
| [25] | 孙奉娄,戴茂飞.纯铝材电解液微弧氮化工艺探讨[J].材料保护,2011(09):12-14. |
| [26] | 李新梅,孙文磊,憨勇,刘炳.纯钛表面电解液微弧碳氮化制备碳氮化钛厚膜[J].金属学报,2008(09):1105-1110. |
| [27] | 李新梅,孙文磊,憨勇,刘炳,孙耀宁.基于电解液微弧放电的碳氮化钛厚膜形成机理分析[J].无机化学学报,2010(06):1049-1055. |
| [28] | 胡宗纯,谢发勤,柳永康,吴向清.钛合金表面等离子体电解氮碳共渗的研究[J].材料导报,2008(04):132-134. |
| [29] | 申仕达,谢发勤,胡宗纯,吴向清,李荣.电压和占空比对TC4合金表面碳氮共渗层组织与性能影响[J].中国表面工程,2011(01):52-55,88. |
| [30] | 杨群,樊新民,黄洁雯.40Cr钢液相等离子体电解氮碳共渗层的组织与性能[J].金属热处理,2012(06):77-80. |
| [31] | PANG Hua,LV Guo-Hua,CHEN Huan,WANG Xin-Quan,ZHANG Gu-Ling,YANG Si-Ze.Microstructure and Corrosion Performance of Carbonitriding Layers on Cast Iron by Plasma Electrolytic Carbonitriding[J].中国物理快报（英文版）,2009(08):278-280. |
| [32] | Li Xinmei;Han Yong .Mechanical properties of Ti(C0.7-N0.3) film produced by plasma electrolytic carbonitriding of Ti6Al4V alloy[J].Applied Surface Sinence,2008,254(20):6350. |
| [33] | 胡宗纯,谢发勤,吴向清.TC4钛合金表面等离子体电解氮碳共渗层的特征与耐磨性[J].金属热处理,2010(05):23-26. |
| [34] | 田占军,李杰,沈德久,王玉林,刘凯.液相等离子体电解渗碳、渗氮及其碳氮共渗技术[J].电镀与涂饰,2006(02):53-56. |
| [35] | Shen Dejiu;Wang Yulin;Xing Guangzhong .A novel method of surface modification for steel by plasma electrolysis carbonitriding[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2007,458(1-2):240. |
| [36] | Fan Xinmin;Huang Jiewen;Yang Qun.Plasma electrolytic carbonitriding of 20CrMnTi steel[A].Shenzhen,2011:1393. |
| [37] | PANG Hua,ZHANG Gu-Ling,WANG Xing-Quan,LV Guo-Hua,CHEN Huan,YANG Si-Ze.Mechanical Performances of Carbonitriding Films on Cast Iron by Plasma Electrolytic Carbonitriding[J].中国物理快报（英文版）,2011(11):243-245. |
| [38] | Mazhyn S;Bauyrzhan R;Michael S.Effects of electrolyte plasma carbonitriding on tribological properties of high speed steel[A].Dalian,2013:7. |
| [39] | M. Kh. Aliev;A. Sabour;P. Taheri .Corrosion Protection Study of Nanocrystalline Plasma-Electrolytic Carbonitriding Process for CP-Ti[J].Protection of Metals,2008(6):618-623. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%