对国内外有关SiC颗粒增强铝基复合材料摩擦磨损的研究现状进行了系统的综述,分别介绍了内部因素(包括颗粒粒径、颗粒含量、颗粒形貌和基体材料)和外部因素(包括载荷、速度、温度和电流)对SiC颗粒增强铝基复合材料摩擦磨损性能的影响,并总结了SiC颗粒增强铝基复合材料在交通运输、航空航天和电子等领域中的应用.
参考文献
[1] | Hocheng H;Lei W T;Hsu H S .Preliminary study of material removal in electrical-discharge machining of SiC/Al[J].J Mater Process Techn,1997,63(1):813. |
[2] | 高玉红,李运刚.金属基复合材料的研究进展[J].河北化工,2006(06):51-54. |
[3] | Ranjit Bauri;M.K. Surappa .Processing and properties of Al-Li-SiC_p composites[J].Science and technology of advanced materials,2007(6):494-502. |
[4] | 侯丽丽,尹志新,樊新波.铝基复合材料的研究现状及发展[J].热加工工艺,2008(10):84-88. |
[5] | 陈跃,上官宝,铁喜顺,张永振,孙乐民.SiCp增强铝基复合材料制动摩擦学特性研究[C].摩擦学学报第22卷增刊,2002:238-241. |
[6] | Kavosi, J.;Saei, M.;Kazeminezhad, M..Dislocation density and flow stress modeling of nanostructured Al-SiC _p composite during accumulative roll bonding[J].Computational Materials Science,2013:359-363. |
[7] | Junjie Huang;Zhou Wang;Kai Bian;Chuanhai Jiang .Investigation for Different Peening Techniques on Residual Stress Field of SiC_w/Al Composite[J].Journal of Materials Engineering and Performance,2013(3):782-786. |
[8] | E. Candan;H. Ahlatci;H. Cimenoglu .Abrasive wear behaviour of Al-SiC composites produced by pressure infiltration technique[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(2):133-138. |
[9] | Cao L;Wang Y;Yao C K .The wear properties of an SiCwhisker-reinforced aluminium composite[J].WEAR,1990,140(2):273. |
[10] | 樊建中,桑吉梅,石力开.颗粒增强铝基复合材料的研制、应用与发展[J].材料导报,2001(10):55-57,49. |
[11] | Sanjeev Das;Siddhartha Das;Karabi Das .Abrasive wear of zircon sand and alumina reinforced Al-4.5.wt%Cu alloy matrix composites - A comparative study[J].Composites science and technology,2007(3/4):746-751. |
[12] | 李俊宪,孙保良,邵光杰.SiC颗粒增强铝基复合材料的摩擦磨损性能[J].机械工程材料,2006(05):62-65. |
[13] | 戈晓岚,许晓静,蔡兰,陈康敏,居志兰.SiCp含量和尺寸对Al基复合材料摩擦学特性的影响[J].中国有色金属学报,2005(03):458-462. |
[14] | Chung S;Hwang B H .A microstructural study of the wear behaviour of SiCp/Al composites[J].Tribology International,1994,27(5):307. |
[15] | H. Lee;K. Ko .Effect of SiC particle size on cold sprayed Al-SiC composite coatings[J].Surface Engineering,2009(8):606-611. |
[16] | Umanath K;Palanikumar K;Selvamani S T .Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites[J].COMPOSITES PART B-ENGINEERING,2013,53:159. |
[17] | 张福全,苏钢,龚晓叁,胡仲勋,吴有伍.7075/SiCp铝基复合材料的摩擦磨损性能研究[J].铸造技术,2003(03):236-238. |
[18] | 许栩达,姜锋,蒋春丽,仝永刚,杨祖勇,王烈贤.SiCp/ZL109复合材料摩擦磨损性能研究[J].兵器材料科学与工程,2008(05):79-82. |
[19] | Tiejun Ma;Hideki Yamaura;Donald A. Koss .Dry sliding wear behavior of cast SiC-reinforced Al MMCs[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):116-125. |
[20] | 康立忠,张荻,欧阳求保.颗粒增强铝基复合材料干摩擦磨损研究进展[J].热加工工艺,2008(12):104-108. |
[21] | 徐绯,李玉龙,郭伟国,汤忠斌.颗粒形状、含量和基体特性对金属基复合材料压缩力学行为的影响[J].复合材料学报,2003(06):36-41. |
[22] | 欧阳求保,方浩,王文龙,张曾祜,张国定.铝基复合材料的摩擦磨损机理的应用研究[J].汽车工艺与材料,2004(07):37-39,42. |
[23] | (O)sterle W;Urban I .Friction layers and friction films on PMC brake pads[J].WEAR,2004,257(1):215. |
[24] | 马东辉,张永振,陈跃,上官宝.速度和压力对SiCp增强铝基复合材料摩擦磨损性能的影响[J].中国表面工程,2004(01):24-27. |
[25] | X. H. Chen;C. S. Chen;H. N. Xiao;H. B. Liu;L. P. Zhou;S. L. Li;G. Zhang .Dry friction and wear characteristics of nickel/carbon nanotube electroless composite deposits[J].Tribology International,2006(1):22-28. |
[26] | Alidokht S A;Abdollah-zadeh A;Assadi H .Effect of applied load on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite[J].WEAR,2013,305(1):291. |
[27] | 张永振,邱明,上官宝,铁喜顺,马东辉.高速干摩擦条件下铝基复合材料的摩擦磨损行为研究[J].摩擦学学报,2005(04):343-347. |
[28] | 齐海波,丁占来,樊云昌,姜稚清.SiC颗粒增强铝基复合材料制动盘的研究[J].复合材料学报,2001(01):62-66. |
[29] | Ravikiran A;Surappa M K .Effect of sliding speed on wear behaviour of A356 Al-30wt% SiCp MMC[J].WEAR,1997,206:33. |
[30] | S. Anoop;S. Natarajan;S.P. Kumaresh Babu .Analysis of factors influencing dry sliding wear behaviour of Al/SiC_p-brake pad tribosystem[J].Materials & design,2009(9):3525-3536. |
[31] | 杨忠,李建平,郭永春,杜卫东,夏峰,许吉信.SiCp增强高强耐热铝基复合材料的高温摩擦磨损行为[J].铸造,2006(10):1043-1046. |
[32] | 王一奇,宋正日.应用模压铸造法制造的Al2O3f/SiCp混杂增强铝基复合材料的摩擦磨损行为[J].中国有色金属学报(英文版),2011(07):1441-1448. |
[33] | L. Hao;Y. Q. He;Na Wang .The Thermal Stability and Elevated Temperature Mechanical Properties of Spray-Deposited SiC_p/Al-11.7Fe-1.3V-1.7Si Composite[J].Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials,2009(4):351-364. |
[34] | Rodriguez J;Poza P;Garrido M A et al.Dry sliding wear behaviour of aluminium-lithium alloys reinforced with SiC particles[J].WEAR,2007,262(3):292. |
[35] | A. Loghman;A. Ghorbanpour Arani;A. R. Shajari;S. Amir .Time-dependent thermoelastic creep analysis of rotating disk made of Al-SiC composite[J].Archive of Applied Mechanics,2011(12):1853-1864. |
[36] | 上官宝,孙乐民,张永振,邢建东,沈向前.SiCp增强Al基复合材料的载流摩擦磨损性能研究[C].哈尔滨工业大学学报(2006全国摩擦学学术会议:论文专辑),2006:38-40. |
[37] | Zhao H;Barber G C;Liu J .Friction and wear in high speed sliding with and without electrical current[J].WEAR,2001,249(5):409. |
[38] | Chen Zhenhua;Teng Tie;Chen Gang;Fu Dingfa;Yan Hongge .Effect of the silicon content and thermomechanical treatment on the dry sliding wear behavior of spray-deposited Al-Si/SiCp composites[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2007(3/4):362-368. |
[39] | 金云学.铝基复合材料的干滑动摩擦磨损特性及磨损机制[J].特种铸造及有色合金,2009(S1):347. |
[40] | Benal M M;Shivanand H K .Effects of reinforcements content and ageing durations on wear characteristics of Al (6061) based hybrid composites[J].WEAR,2007,262(5):759. |
[41] | 陈跃,沈百令,张永振,邢建东.颗粒增强铝基复合材料干摩擦磨损研究进展[J].兵器材料科学与工程,1999(02):61-67. |
[42] | 宋国芳,杜永平,韩建民.SiC颗粒增强铝基复合材料的摩擦磨损机制研究[J].润滑与密封,2006(05):127-129. |
[43] | Dwivedi R .Development of advanced reinforced aluminium brake rotors[J].J Mater Manuf,1995,104:159. |
[44] | Nussbaum A I .New applications for aluminum-based metal matrix composites[J].Light Metal Age,1997,2:54. |
[45] | 王文龙;吴军华;张国定 .铝基复合材料的摩擦磨损性能[J].金属学报,1998,34(11):1178. |
[46] | 任德亮,齐海波,丁占来,樊云昌.SiCp/Al复合材料搅拌铸造制备工艺的研究[J].铸造技术,1999(02):41. |
[47] | 高彩桥.摩擦金属学[M].哈尔滨:哈尔滨工业大学出版社,1988 |
[48] | Davis J R.ASM specialty handbook aluminum and aluminum alloys[M].New York:ASM International Handbook Committee,1994 |
[49] | 齐海波,樊云昌,丁占来.颗粒增强铝基复合材料在汽车制动盘上的应用[J].河北省科学院学报,2001(02):89-92. |
[50] | 桂满昌;王殿斌 .颗粒增强铝基复合材料在汽车上的应用[J].机械工程材料,1996,20(6):30. |
[51] | 齐海波,樊云昌,丁占来.轿车用铝基复合材料制动盘的制备[J].石家庄铁道学院学报,2000(01):18-22. |
[52] | Zenuner T;Stojanov P;Sahm P R .Developing trends in disc brake technology for tail application[J].Materials Science and Technology,1998,14(9-10):857. |
[53] | 姚永康.机车车辆铝合金复合材料制动盘的开发[J].国外机车车辆工艺,1996(4):9. |
[54] | 朱龙驹,陈喜红,齐斌,陈振华,陈刚,严红革.高速列车铝基复合材料制动盘及其闸片的研制[J].电力机车与城轨车辆,2006(01):1-5. |
[55] | Sahin Y;Kilicli V .Abrasive wear behaviour of SiCp/Al alloy composite in comparison with ausferritic ductile iron[J].WEAR,2011,271(11-12):2766. |
[56] | J. J. Sobczak;L. Drenchev;R. Asthana .Nomograms for rapid assessment of particle sedimentation behaviour in liquid phase processing of particle reinforced metal composites[J].International Journal Cast Metals Research,2013(2):122-128. |
[57] | Rajesh Kumar Bhushan .Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites[J].Journal of cleaner production,2013(Jan.):242-254. |
[58] | Jifeng Gao;Jinping Suo .Preparation and characterization of the electrodeposited Cr-Al_2O_3/SiC composite coating[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2011(22):9643-9648. |
[59] | Lopez A J;Torres B;Taltavull C et al.Influence of high velocity oxygen-fuel spraying parameters on the wear resistance of Al-SiC composite coatings deposited on ZE41A magnesium alloy[J].Materials and Design,2013,43:144. |
[60] | Cheng Zhifeng;Zhang Bao;Dai Ming.Application of particulate reinforced aluminum matrix composite in airborne photoelectric turret[A].Wuhan,2011:4807. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%