基于声发射技术监测疲劳磨损失效的研究进展

材料导报, 2015, 29(3): 109-114. doi: 10.11896/j.issn.1005-023X.2015.03.019

基于声发射技术监测疲劳磨损失效的研究进展

林丽 ^1, , 李国禄 ^2, , 王海斗 ^3, , 康嘉杰 ^4,

1.河北工业大学材料科学与工程学院,天津,300130

2.河北工业大学材料科学与工程学院,天津,300130

3.装甲兵工程学院装备再制造技术国防科技重点实验室,北京,100072

4.中国地质大学(北京)工程技术学院,北京,100083

基金项目: 国家自然科学基金(51275151) 国家973计划(2011CB013405) 国家杰出青年科学基金(51125023)

关键词：声发射 , 特征参数 , 疲劳磨损失效

Status of Monitoring Failure of Fatigue Wear Based on Acoustic Emission Technique

Keywords： acoustic emission , characteristic parameters , wear fatigue failure

现代工业的一些重要零部件在变载荷的作用下易发生疲劳磨损失效.声发射技术作为一种新型的无损监测技术,可以实现早期的安全预警,被广泛应用在机械零件、工程构件及涂层的失效监测上.参数分析法是最常用的声发射信号处理方法.典型的声发射特征参数包括能量、计数、幅值等.对声发射信号参数法分析轴类零件及涂层的失效模式的研究现状进行了较为全面的综述,最后总结了目前存在的问题,简述了解决思路,以期为声发射技术监测疲劳磨损失效奠定良好的基础.

参考文献

[1]	Meriaux J;Boinet M .Identification of fretting fatigue crack propagation mechanisms using acoustic emission[J].Tribology International,2010,43:2166.
[2]	赵美云,李力,陈保家.滚动轴承故障声发射信号的小波包络谱分析[J].轴承,2008(04):38-41.
[3]	Geng Rongsheng;Fu Gangqiang .Evaluation of corrosion damage of aluminum alloy using acoustic emission testing[J].Chinese J Acoustics,2004,23:1.
[4]	李耀东,黄成祥,侯力.模态声发射技术在构件疲劳裂纹检测中的应用[J].振动与冲击,2005(02):122-125.
[5]	杨明纬.声发射检测[M].北京:机械工业出版社,2005
[6]	耿荣生,沈功田,刘时风.基于波形分析的声发射信号处理技术[J].无损检测,2002(06):257-261.
[7]	刘贵杰;巩亚东;王宛山.基于摩擦声发射信号的磨削表面粗糙度在线检测方法研究[J].摩擦学学报,2001(6):38.
[8]	刘学文;林吉中;袁祖贻 .应用声发射技术评价材料疲劳损伤的研究[J].中国铁道科学,1997,18(4):74.
[9]	袁振明;马羽宽;何泽云.声发射技术及其应用[M].北京:机械工业出版社,1985
[10]	沈功田,戴光,刘时风.中国声发射检测技术进展--学会成立25周年纪念[J].无损检测,2003(06):302-307.
[11]	王慧晶 .基于声发射参数的材料疲劳断裂研究[D].大连:大连理工大学,2013.
[12]	Mba D .Development of acoustic emission technology for condition monitoring and diagnosis of rotating machines;bearing,pumps,gearboxes,engines and rotating structures[J].Shock Vib Digest,2006,38(1):3.
[13]	Zhang Z Q;Li G L;Wang H D et al.Investigation of rolling contact fatigue damage process of the coating by acoustics emission and vibration signals[J].Tribology International,2012,47(1):25.
[14]	Everson Curt E;Cheraghi S Hoessein.The application of acoustic emission for precision drilling process monitoring[J].Int J Machine Tools Manuf,1999(39):371.
[15]	宋亚南,徐滨士,王海斗,刘明.Al2O3陶瓷涂层尖端受载下的声发射信号参量分析[J].声学学报,2013(04):413-418.
[16]	Ali Beheshti;M. M. Khonsari .On the prediction of fatigue crack initiation in rolling/sliding contacts with provision for loading sequence effect[J].Tribology International,2011(12):1620-1628.
[17]	Zhu S;Xu B S;Yao J K .High quality ceramic coatings sprayed by high efficiency hypersonic plasma spraying gun[J].Materials Science Forum,2005,475-479:3981.
[18]	Holmberg K;Laukkanen A;Ronkainen H;Wallin K;Varjus S;Koskinen J .Tribological contact analysis of a rigid ball sliding on a hard coated surface Part II: Material deformations, influence of coating thickness and Young's modulus[J].Surface & Coatings Technology,2006(12/13):3810-3823.
[19]	D. L. DUAN;S. LI .Wear Behavior of Thermally Sprayed Coatings under Different Loading Conditions[J].Tribology Transactions,2005(1):45-50.
[20]	Mohanty M;Smith R W;De Bonte M et al.Sliding wear behavior of thermally sprayed 75/25 Cr3C2/NiCr wear resistant coatings[J].WEAR,1996,198(12):251.
[21]	王海滨,宋晓艳,高杨,刘雪梅.超音速火焰喷涂法制备超细结构WC-Co涂层及其结构与性能表征[J].粉末冶金材料科学与工程,2011(04):492-497.
[22]	张志强,李国禄,王海斗,徐滨士,朴钟宇.基于声发射原理监测涂层疲劳磨损的研究[J].摩擦学学报,2012(01):89-95.
[23]	Energy Index technique for detection of Acoustic Emissions associated with incipient bearing failures[J].Applied acoustics,2010(9):P.812.
[24]	李国禄,张志强,王海斗,徐滨士,朴钟宇.涂层疲劳损伤声发射特征参数及损伤机理[J].材料工程,2013(06):45-49,71.
[25]	P.L.P. Wasantha;P.G. Ranjith;S.S. Shao .Energy monitoring and analysis during deformation of bedded-sandstone: Use of acoustic emission[J].Ultrasonics,2014(1):217-226.
[26]	Vidya Sagar R;Raghu Prasad B K .An experimental study on acoustic emission energy as a quantitative measure of size independent specific fracture energy of concrete beams[J].CONSTRUCTION AND BUILDING MATERIALS,2011,25(1):2349.
[27]	王朝晖,张来斌,辛若家,梁伟.声发射技术在管道泄漏检测中的应用[J].中国石油大学学报（自然科学版）,2007(05):87-90.
[28]	张来斌,杨占才,王朝晖,樊建春.声发射技术用于诊断发动机活塞与缸套间磨损故障的实验研究[J].石油大学学报(自然科学版),2001(05):60-62.
[29]	Al-Balushi K R;Addali A;Charnley B .Energy index technique for detection of acoustic emission associated with incipient bearing failures[J].Appl Acoustic,2010,71(9):812.
[30]	Huang Qi;Li Luping;Rao Hongde.The AE law of sliding bearings in rotating machinery and its application in fault diagnosis[A].Hangzhou,2007
[31]	李录平,邹新元,饶洪德,晋风华,靳倩,张世海,陈顺章.滑动轴承的声发射信号特征与轴承状态的关系试验研究[J].汽轮机技术,2009(05):369-371,375.
[32]	陆利威,李新春,张田.基于声发射技术的滑动轴承故障诊断方法研究[J].机械工程与自动化,2010(06):123-124,127.
[33]	赵一帆,齐明侠,赵继红,赵焕娟.基于声发射技术的滚动轴承故障检测[J].轴承,2010(04):50-53.
[34]	L(o)hr M;Spaltmann D;Binkowski S et al.In situ acoustic emission for wear life detection of DLC coatings during sliprolling friction[J].WEAR,2006,260:469.
[35]	Mailleta E;Godina N;R'Milia M et al.Real-time evaluation of energy attenuation:A novel approach to acousticemission analysis for damage monitoring of ceramic matrix composites[J].Journal of the European Ceramic Society,2014,34:1673.
[36]	Piao Zhong-yu;Xu Bin-shi;Wang Hai-dou;Wen Dong-hui.Investigation of acoustic emission source of Fe-based sprayed coating under rolling contact[J].International Journal of Fatigue,2013:184-188.
[37]	沈功田,耿荣生,刘时风.声发射信号的参数分析方法[J].无损检测,2002(02):72-77.
[38]	Harris D O;Dunegan H L .Continuous monitoring of fatigue crack growth by acoustic emission techniques[J].EXPERIMENTAL MECHANICS,1974,14:71.
[39]	Rogers L M et al.Use of acoustic emission methods for crack growth detection in offshore and other structures[J].Int Maritime Techn,1998,110:171.
[40]	李光海,刘正义.基于声发射技术的金属高频疲劳监测[J].中国机械工程,2004(13):1205-1209.
[41]	Fang D;Beerkovits A .Fatigue design mode based on damage mechanisms revealed by acoustic emission measurements[J].Trans ASME,1995,117:200.
[42]	Bassim M N;Pedrycz W.Development of intelligent systems for monitoring of acoustic emission[A].Amsterdam,1989:441.
[43]	Roberts T;Talebzadeh M .Acoustic emission monitoring of fatigue crack propagation[J].JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH,2003,59(6):695.
[44]	秦萍,傅和平,闫兵,谭达明.基于声发射监测的静载荷滑动轴承接触摩擦故障诊断的实验研究[J].摩擦学学报,2006(06):585-589.
[45]	Tandon N;Nakra B C .Defect detection of rolling element bearings by acoustic emission method[J].J Acoustic Emission,1990,9(1):25.
[46]	Choudhury A;Tandon N .Application of acoustic emission technique for the detection of defects in rolling element bearings[J].Tribology International,2000,33:39.
[47]	张颖,苏宪章,刘占生.基于周期性声发射撞击计数的滚动轴承故障诊断[J].轴承,2011(06):38-41.
[48]	Ziaur Rahman;Hiroaki Ohba;Takeo Yoshioka;Takashi Yamamoto .Incipient damage detection and its propagation monitoring of rolling contact fatigue by acoustic emission[J].Tribology International,2009(6):807-815.
[49]	Hase A;Wada M;Mishina H .The relationship between acoustic emissions and wear particles for repeated dry rubbing[J].WEAR,2008,265:831.
[50]	Li Guo-lu;Zhang Zhi-qiang;Wang Hai-dou;Xu Bin-shi;Piao Zhong-yu;Zhu Li-na.Acoustic emission monitoring and failure mechanism analysis of rolling contact fatigue for Fe-based alloy coating[J].Tribology International,2013:129-137.
[51]	耿荣生,沈功田,刘时风.模态声发射基本理论[J].无损检测,2002(07):302-306.
[52]	王晓伟,刘占生,张广辉,窦唯.基于声发射的可倾瓦径向滑动轴承碰摩故障诊断[J].中国电机工程学报,2009(08):64-69.
[53]	廖传军,罗晓莉,李学军.基于声发射的滚动轴承损伤振动机理研究[J].无损检测,2007(12):712-715,735.
[54]	张辉,李树君,王伟平,田贺红,武铁军,方涛,汪瑞军,张天剑.声发射技术在热障涂层失效机理研究中的应用[J].无损检测,2010(06):409-411.
[55]	Teerawat Laonapakul;Yuichi Otsuka;Achariya Rakngarm Nimkerdphol;Yoshiharu Mutoh.Acoustic emission and fatigue damage induced in plasma-sprayed hydroxyapatite coating layers.[J].Journal of the mechanical behavior of biomedical materials,2012:123-133.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

基于声发射技术监测疲劳磨损失效的研究进展

Status of Monitoring Failure of Fatigue Wear Based on Acoustic Emission Technique

参考文献