欢迎登录材料期刊网

材料期刊网

高级检索

针对涂层硬度梯度过渡急剧、涂层与基体的结合力不足的问题,利用电子束对40Cr材料表面进行预处理,然后溅射Cr涂层,考察电子束预处理工艺对材料表面形貌、硬度分布、粗糙度、结合力及摩擦磨损等性能的影响规律.研究结果表明,电子束预处理后,基体硬度提高79%~109%,镀Cr后硬度进一步提高14%~25%,基体熔坑形貌不能完全被Cr层覆盖,涂层粗糙度高于基体未预处理涂层.40Cr经电子束预处理后溅射Cr层的结合力可提高约41.7%,主要原因是表面晶体结构及状态影响了涂层结合力.电子束预处理延长了涂层初磨阶段时间,增强了表面的摩擦磨损性能.

参考文献

[1] Dong C.;Wu A.;Hao S.;Zou J.;Liu Z.;Zhong P.;Zhang A.;Xu T.;Chen J. Xu J.;Liu Q.;Zhou Z. .Surface treatment by high current pulsed electron beam[J].Surface & Coatings Technology,2003(0):620-624.
[2] Gao Yukui .Use of low-energy,high-current electron beams for surface treatment of materials[J].Applied Surface Sinence,2011,257(17):7455.
[3] Guan QF;Yang PL;Zou H;Zou GT .Nanocrystalline and amorphous surface structure of 0.45%C steel produced by high current pulsed electron beam[J].Journal of Materials Science,2006(2):479-483.
[4] Zou J X;Zhang K M;Hao S Z et al.Mechanisms of hardening,wear and corrosion improvement of 316 L stainless steel by low energy high current pulsed electron beam surface treatment[J].THIN SOLID FILMS,2010,519(04):1404.
[5] Rotshtein VP;Ivanov YF;Proskurovsky DI;Karlik KV;Shulepov IA;Markov AB .Microstructure of the near-surface layers of austenitic stainless steels irradiated with a low-energy, high-current electron beam[J].Surface & Coatings Technology,2004(0):382-386.
[6] Ivanov Y.;Matz W.;Rotshtein V.;Gunzel R.;Shevchenko N. .Pulsed electron-beam melting of high-speed steel: structural phase transformations and wear resistance[J].Surface & Coatings Technology,2002(2/3):188-198.
[7] Mueller G;Engelko V;Weisenburger A et al.Surface alloying by pulsed intense electron beams[J].VACUUM,2005,77(04):469.
[8] Rotshtein VP;Ivanov YF;Markov AB;Proskurovsky DI;Karlik KV;Oskomov KV;Uglov BV;Kuleshov AK;Novitskaya MVF;Dub SN .Surface alloying of stainless steel 316 with copper using pulsed electron-beam melting of film-substrate system[J].Surface & Coatings Technology,2006(22/23):6378-6383.
[9] 胡建军,许洪斌,陈元芳,韩超.电子束改性40Cr材料表面微动摩擦磨损性能分析[J].中国表面工程,2012(04):107-111.
[10] 易赟,赵晖,王小辉,朱其柱,陈燕.HCPEB表面处理的研究现状[J].材料导报,2011(03):101-105.
[11] Zhang KM;Zou JX;Grosdidier T;Dong C;Yang DZ .Improved pitting corrosion resistance of AISI 316L stainless steel treated by high current pulsed electron beam[J].Surface & Coatings Technology,2006(3/4):1393-1400.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%