利用商业有限元软件Abaqus模拟不同截面形状纯锆试样在不同摩擦系数条件下单道次等通道转角挤压变形.模拟结果表明,摩擦系数对挤压载荷有明显影响,随着摩擦系数的增大,截面形状对挤压载荷的影响越来越小.同时发现,随着摩擦系数的增大,Z面等效应变分布均呈减小趋势,且圆形试样减小幅度大于方形试样,说明摩擦及圆形截面有助于工业纯锆的均匀变形;对X面的等效应变分布分析发现,摩擦系数对圆形试样X面等效应变分布影响不大,方形试样X面变形均匀性随摩擦系数的增大而减小.考虑到摩擦会导致挤压力过大,因此在挤压过程中应适当减小摩擦系数,并选择圆形截面试样.
参考文献
| [1] | Yoshinori iwahasgi.The process of grain refinement in equal-channel angular pressing[J].Acta materialia,19989(9):3317-3331. |
| [2] | S. SURENDARNATH;K. SANKARANARAYANASAMY;B. R.AVISANKAR.Workability Study on 99.04% Pure Aluminum Processed by ECAP[J].Materials and Manufacturing Processes,20144/6(4/6):691-696. |
| [3] | Chen, Y.J.;Chai, Y.C.;Roven, H.J.;Gireesh, S.S.;Yu, Y.D.;Hjelen, J..Microstructure and mechanical properties of Al-xMg alloys processed by room temperature ECAP[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:139-147. |
| [4] | Ramin Jahadi;Mohammad Sedighi;Hamid Jahed.ECAP effect on the micro-structure and mechanical properties of AM30 magnesium alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:178-184. |
| [5] | W. Blum;J. Dvo?ák;P. Král;P. Eisenlohr;V. Skleni?ka.Effect of grain refinement by ECAP on creep of pure Cu[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:423-432. |
| [6] | 王庆娟;徐长征;郑茂盛;朱杰武;M.Buksa;L.Kunz.等径弯曲通道制备的超细晶铜的疲劳性能[J].金属学报,2007(5):498-502. |
| [7] | Zhang, Z.J.;Duan, Q.Q.;An, X.H.;Wu, S.D.;Yang, G.;Zhang, Z.F..Microstructure and mechanical properties of Cu and Cu-Zn alloys produced by equal channel angular pressing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201112(12):4259-4267. |
| [8] | Y.J. Chen;Y.J. Li;J.C. Walmsley;S. Dumoulin;P.C. Skaret;H.J. Roven.Microstructure evolution of commercial pure titanium during equal channel angular pressing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20103(3):789-796. |
| [9] | 赵西成;王幸运;杨西荣;王成;刘晓燕.120°模具室温8道次ECAP变形TA1纯钛的组织与性能[J].稀有金属材料与工程,2011(1):28-31. |
| [10] | 胡卜亮;杨西荣;吕梦南;金博宇;贾少伟;赵威.纯钛连续等径通道转角挤压的有限元模拟[J].热加工工艺,2013(13):134-137. |
| [11] | 刘远清.工业级锆的应用及市场前景[C].中国有色金属工业协会钛锆铪分会第三届镐铪行业大会暨锆铪发展论坛论文集,2008:17-28. |
| [12] | V. Patil Basavaraj;Uday Chakkingal;T. S. Prasanna Kumar.Study of channel angle influence on material flow and strain inhomogeneity in equal channel angular pressing using 3D finite element simulation[J].Journal of Materials Processing Technology,20091(1):89-95. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%