欢迎登录材料期刊网

材料期刊网

高级检索

利用单活性位点前过渡金属 FI 催化剂(Fenokishi-Imin catalyst)进行乙烯的聚合反应,在较低的温度下,制备出具有低链缠结度的超高分子量聚乙烯。经高温凝胶色谱(PL-GPC)测定,产物分子量达到了(2~5)×106;差示扫描量热仪(DSC)检测表明其结晶度达到了70%;流变学研究表明,相对于商业超高分子量聚乙烯,产物链缠结密度大大降低。进一步的力学性能测试显示添加少量的低缠结超高分子量聚乙烯对线性低密度聚乙烯的增强作用非常明显,可使拉伸强度和断裂伸长率大大提高。

The present research applied a type of single-active-site transition metal catalyst named Fenokishi-Imin catalyst (FI catalyst)to the polymerization of ethylene at a relatively lower temperature.With the controlled chain growth rate,we successfully synthesized ultra-high molecular weight polyethylene (UHMWPE)with low entan-glement density and much improved processing characteristics.Detected by gel permeation chromatography (GPC),it has a molecular weight range of 2-5 million.Differential scanning calorimeter (DSC)test showed that the crystallini-ty reaches above 70%.Rheological characterization indicated that the synthesized ultra-high molecular weight polyeth-ylene has a much lower entanglement density than commercial UHMWPE.To explore its potential application,a very small amount of this disentangled UHMWPE was blended with linear low-density polyethylene (LLDPE),obtaining significant improvement of tensile strength and elongation at break confirmed by mechanical tests.

参考文献

[1] 乔金(樑);夏先知;宋文波;郭梅芳;张师军;毛炳权.聚烯烃技术进展[J].高分子材料科学与工程,2014(2):125-132.
[2] E.Kontou;M.Niaounakis.Thermo-mechanical properties of LLDPE/SiO_2 nanocomposites[J].Polymer: The International Journal for the Science and Technology of Polymers,20064(4):1267-1280.
[3] 赵烨;高海洋;张玲;伍青.功能化聚烯烃合成研究进展[J].高分子通报,2009(7):27-35.
[4] Chen, Yang;Zou, Huawei;Cao, Ya;Liang, Mei.Melt miscibility of HDPE/UHMWPE, LDPE/UHMWPE, and LLDPE/UHMWPE blends detected by dynamic rheometer[J].Polymer science, Series A. Chemistry,physics,20145(5):630-639.
[5] Barron, D;Birkinshaw, C.Ultra-high molecular weight polyethylene - Evidence for a three-phase morphology[J].Polymer,200813/14(13/14):3111-3115.
[6] Wei Li;Chao Guan;Jie Xu;Jingshan Mu;Dirong Gong;Zhong-ren Chen;Qi Zhou.Disentangled UHMWPE/POSS nanocomposites prepared by ethylene in situ polymerization[J].Polymer: The International Journal for the Science and Technology of Polymers,20147(7):1792-1798.
[7] 金鹰泰;李刚;曹丽辉;蔡洪光;巴晓微;原宇平;张学全;董为民;WOO Seong-ihi;CHO Hyun-yong;CUI Li-qiang;HONG Dae-sik;JEONG Dong-wook.烯烃聚合高性能FI催化剂的进展[J].高分子通报,2006(9):37-50.
[8] Shigekazu Matsui;Terunori Fujita.FI Catalysts:super active new ethylene polymerization catalysts[J].Catalysis Today,20011(1):63-73.
[9] Chenyang Liu;Jin Wang;Jiasong He.Rheological and thermal properties of m-LLDPE blends with m-HDPE and LDPE[J].Polymer: The International Journal for the Science and Technology of Polymers,200213(13):3811-3818.
[10] Jian-dong Zuo;Ya-min Zhu;Shu-mei Liu.Preparation of HDPE/UHMWPE/MMWPE blends by two-step processing way and properties of blown films[J].Polymer bulletin,20074(4):711-722.
[11] Delgado-Rangel, J.-A.;Addiego, F.;Eddoumy, F.;Ahzi, S.;Patlazhan, S.;Toniazzo, V.;Ruch, D..Impact of microextrusion and addition of graphite nanoplatelets on bulk and surface mechanical properties of UHMWPE[J].Journal of Applied Polymer Science,20126(6):4316-4325.
[12] Rastogi S;Lippits DR;Peters GWM;Graf R;Yao YF;Spiess HW.Heterogeneity in polymer melts from melting of polymer crystals[J].Nature materials,20058(8):635-641.
[13] S.Rastogi;L.Kurelec;D.Lippits;J.Cuijpers;M.Wimmer;P.J.Lemstra.Novel Route to Fatigue-Resistant Fully Sintered Ultrahigh Molecular Weight Polyethylene for Knee Prosthesis[J].Biomacromolecules,20052(2):942-947.
[14] Pandey, A.;Champouret, Y.;Rastogi, S..Heterogeneity in the distribution of entanglement density during polymerization in disentangled ultrahigh molecular weight polyethylene[J].Macromolecules,201112(12):4952-4960.
[15] Ronca, S.;Forte, G.;Tjaden, H.;Yao, Y.;Rastogi, S..Tailoring molecular structure via nanoparticles for solvent-free processing of ultra-high molecular weight polyethylene composites[J].Polymer: The International Journal for the Science and Technology of Polymers,201214(14):2897-2907.
[16] Zhang QH;Lippits DR;Rastogi S.Dispersion and rheological aspects of SWNTs in ultrahigh molecular weight polyethylene[J].Macromolecules,20062(2):658-666.
[17] Mitani M.;Mohri J.;Yoshida Y.;Saito J.;Ishii S.;Tsuru K.;Matsui S. Furuyama R.;Nakano T.;Tanaka H.;Kojoh S.;Matsugi T.;Kashiwa N. Fujita T..Living polymerization of ethylene catalyzed by titanium complexes having fluorine-containing phenoxy-imine chelate ligands[J].Journal of the American Chemical Society,200213(13):3327-3336.
[18] S. Pavlidou;C.D. Papaspyrides.A review on polymer-layered silicate nanocomposites[J].Progress in Polymer Science,200812(12):1119-1198.
[19] Paul, DR;Robeson, LM.Polymer nanotechnology: Nanocomposites[J].Polymer,200815(15):3187-3204.
[20] Chaichana E;Jongsomjit B;Praserthdam P.Effect of nano-SiO2 particle size on the formation of LLDPE/SiO2 nanocomposite synthesized via the in situ polymerization with metallocene catalyst[J].Chemical Engineering Science,200726(26):899-905.
[21] Ho Sik Park;Jong Hoon Lee;Jae-Do Nam.Ultra-Drawing of Gel Films of Ultra High Molecular Weight Polyethylene/Low Molecular Weight Polymer Blends Containing BaTiO_3 Nanoparticles[J].Macromolecular Research,20064(4):430-437.
[22] Lim KLK;Ishak ZAM;Ishiaku US;Fuad AMY;Yusof AH;Czigany T;Pukanszky B;Ogunniyi DS.High-density polyethylene/ultrahigh-molecular-weight polyethylene blend. I. The processing, thermal, and mechanical properties[J].Journal of Applied Polymer Science,20051(1):413-425.
[23] Suwanprateeb J..Binary and ternary particulated composites: UHMWPE/CaCO3/HDPE[J].Journal of Applied Polymer Science,200012(12):1503-1513.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%