3D打印技术亦称为增材制造,是基于三维数学模型数据,通过连续的物理层叠加,逐层增加材料来生成三维实体的技术.3D打印技术与传统材料加工技术相比有许多突出的优势,吸引了国内外工业界、投资界、学术界、新闻媒体和社会公众的热切关注.目前制约3D打印技术发展的因素主要有两个:打印工艺和打印材料.高分子聚合物在3D打印材料中占据主要地位.介绍了当前3D打印常用的高分子材料(热塑性高分子和光敏树脂)和与之相适应的打印工艺(FDM、SLS、SLA、Polyjet等),并对它们的特性和优缺点进行了评述,讨论了这些3D打印材料和工艺的开发面临的问题和挑战.
参考文献
| [1] | DAVID H. FREEDMAN.Layer by Layer[J].Technology review: MIT's magazine of innovation,20121(1):50-53. |
| [2] | Paulsen, S. J.;Miller, J. S..Tissue Vascularization Through 3D Printing: Will Technology Bring Us Flow?[J].Developmental dynamics :,20155(5):629-640. |
| [3] | Peterson, Gregory I.;Larsen, Michael B.;Ganter, Mark A.;Storti, Duane W.;Boydston, Andrew J..3D-Printed Mechanochromic Materials[J].ACS applied materials & interfaces,20151(1):577-583. |
| [4] | Lin, Dong;Jin, Shengyu;Zhang, Feng;Wang, Chao;Wang, Yiqian;Zhou, Chi;Cheng, Gary J..3D stereolithography printing of graphene oxide reinforced complex architectures[J].Nanotechnology,201543(43) |
| [5] | Weihong Zhong;Fan Li;Zuoguang Zhang;Lulu Song;Zhimin Li.Short fiber reinforced composites for fused deposition modeling[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20012(2):125-130. |
| [6] | M. Nikzad;S.H. Masood;I. Sbarski.Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling[J].Materials & design,20116(6):3448-3456. |
| [7] | Shofner ML.;Lozano K.;Rodriguez-Macias FJ.;Barrera EV..Nanofiber-reinforced polymers prepared by fused deposition modeling[J].Journal of Applied Polymer Science,200311(11):3081-3090. |
| [8] | 方禄辉;孙东成;曹艳霞;赖华林.SBS对3D打印ABS性能的影响[J].工程塑料应用,2015(9):54-59. |
| [9] | Shemelya, Corey M.;Rivera, Armando;Perez, Angel Torrado;Rocha, Carmen;Liang, Min;Yu, Xiaoju;Kief, Craig;Alexander, David;Stegeman, James;Xin, Hao;Wicker, Ryan B.;MacDonald, Eric;Roberson, David A..Mechanical, Electromagnetic, and X-ray Shielding Characterization of a 3D Printable Tungsten-Polycarbonate Polymer Matrix Composite for Space-Based Applications[J].Journal of Electronic Materials,20158(8):2598-2607. |
| [10] | Watson,R.A..A low-cost surgical application of additive fabrication[J].Journal of surgical education,20141(1):14-17. |
| [11] | 许小曙.尼龙材料的SLS成型技术[J].建设机械技术与管理,2013(08):74-75. |
| [12] | 陈卫;汪艳;傅轶.用于3D打印的改性聚乳酸丝材的制备与研究[J].工程塑料应用,2015(8):21-24. |
| [13] | Van Rie, Jonas;Declercq, Heidi;Van Hoorick, Jasper;Dierick, Manuel;Van Hoorebeke, Luc;Cornelissen, Ria;Thienpont, Hugo;Dubruel, Peter;Van Vlierberghe, Sandra.Cryogel-PCL combination scaffolds for bone tissue repair[J].Journal of Materials Science. Materials in Medicine,20153(3):123.1. |
| [14] | 邹海霞;喻爱芳.新型共聚酯-PETG[J].合成纤维,2004(1):16-18,9. |
| [15] | David Espalin;Danny W. Muse;Eric MacDonald;Ryan B. Wicker.3D Printing multifunctionality: structures with electronics[J].The International Journal of Advanced Manufacturing Technology,20145/8(5/8):963-978. |
| [16] | Eric J. McCullough;Vamsi K. Yadavalli.Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices[J].Journal of Materials Processing Technology,20136(6):947-954. |
| [17] | Lin,H.;Zhang,D.;Alexander,P.G.;Yang,G.;Tan,J.;Cheng,A.W.M.;Tuan,R.S..Application of visible light-based projection stereolithography for live cell-scaffold fabrication with designed architecture[J].Biomaterials,20132(2):331-339. |
| [18] | Yayue Pan;Xuejin Zhao;Chi Zhou;Yong Chen.Smooth surface fabrication in mask projection based stereolithography[J].Journal of manufacturing processes,20124(4):460-470. |
| [19] | Melchels FP;Feijen J;Grijpma DW.A review on stereolithography and its applications in biomedical engineering.[J].Biomaterials,201024(24):6121-6130. |
| [20] | G.V. Salmoria;C.H. Ahrens;V.E. Beal;A.T.N. Pires;V. Soldi.Evaluation Of Post-curing And Laser Manufacturing Parameters Onthe Properties Of Somos 7110 Photosensitive Resin Used In Stereolithography[J].Materials & design,20093(3):758-763. |
| [21] | Salmoria GV;Klauss P;Pires ATN;Roeder J;Soldi V.Investigations on cure kinetics and thermal degradation of stereolithography Renshape (TM) 5260 photosensitive resin[J].Polymer Testing,20086(6):698-704. |
| [22] | 刘甜;胡晓玲;方淦;于洁;郭文勇;尤庆亮.用于3D打印光固化树脂的制备和性能测试[J].工程塑料应用,2014(10):20-23. |
| [23] | 黄笔武;谢王付;杨志宏.一种3D打印立体光刻快速成型光敏树脂的制备及性能研究?[J].功能材料,2014(24):24100-24104. |
| [24] | 江阳;陈利华;孟庆华;郑少瑜.一种可清除甲醛的光敏树脂的制备及其在3D打印成型中的应用[J].信息记录材料,2015(4):3-6,31. |
| [25] | C. C. Chang.Rapid prototyping fabricated by UV resin spray nozzles[J].Rapid prototyping journal,20042(2):136-145. |
| [26] | D. Dimitrov;K. Schreve;N. de Beer.Advances in three dimensional printing - state of the art and future perspectives[J].Rapid prototyping journal,20063(3):136-147. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%