基于蠕变损伤力学,仿真了蠕变裂纹扩展过程.用ABAQUS软件模拟研究了试样几何形状和宽度不同的两种面内拘束条件对P92钢在650℃时蠕变裂纹扩展(CCG)速率的影响,并进行了试验验证.仿真结果表明:试样几何形状和宽度对CCG速率的影响与载荷水平(C*)有关;在低载荷水平区内,C(T)试样的拘束水平大于SEN(T)试样,并且对应的CCG速率较大;在中载荷水平区,随着试样宽度的增大,裂纹尖端拘束和CCG速率增大;在高载荷水平区,CCG速率基本不受面内拘束(试样几何形状、宽度)条件的影响;在条件相同的情况下,试样宽度拘束水平大于试样几何形状.试验结果表明,试验与有限元分析(FEA)的蠕变裂纹扩展结果相符合.
参考文献
| [1] | Torsten-Ulf KERN;Marc STAUBLI;Brendon SCARLIN.The European Efforts in Material Development for 650 deg C USC Power Plants-COST522[J].ISIJ International,200212(12):1515-1519. |
| [2] | 林华.大型火力发电厂超超临界机组主蒸汽管SA335-P92钢焊接工艺研究[J].装备制造技术,2008(10):69-72. |
| [3] | 赵雷 .考虑拘束效应的高温下含缺陷P92管道寿命评估方法研究[D].天津大学,2012. |
| [4] | Yang, J.;Wang, G.Z.;Xuan, F.Z.;Tu, S.T..Unified characterisation of in-plane and out-of-plane constraint based on crack-tip equivalent plastic strain[J].Fatigue & Fracture of Engineering Materials and Structures,20136(6):504-514. |
| [5] | Zhao, Lei;Xu, Lianyong;Han, Yongdian;Jing, Hongyang.Quantifying the constraint effect induced by specimen geometry on creep crack growth behavior in P92 steel[J].International Journal of Mechanical Sciences,2015:63-74. |
| [6] | M. Yatomi;K.M. Nikbin;N.P. O'Dowd.Creep crack growth prediction using a damage based approach[J].International Journal of Pressure Vessels and Piping,20037/8(7/8):573-583. |
| [7] | Chang-Sik Oh;Nak-Hyun Kim;Yun-Jae Kim;Catrin Davies;Kamran Nikbin;David Dean.Creep failure simulations of 316H at 550℃: Part I – A method and validation[J].Engineering Fracture Mechanics,201117(17):2966-2977. |
| [8] | Nak-Hyun Kim;Chang-Sik Oh;Yun-Jae Kim.Creep failure simulations of 316H at 550 °C: Part II - Effects of specimen geometry and loading mode[J].Engineering Fracture Mechanics,2013:169-181. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%