为提高微米级硬质陶瓷颗粒在金属基复合镀层的含量,制备性能优异的防护性镀层,采用喷射电沉积的方法在直流电压下制备了Co-Cr3C2复合镀层,利用控制变量法探讨了电流密度、固体颗粒用量、镀液流量以及喷枪移动速度等对镀层中颗粒含量及镀层性能的影响,并分析了各因素的影响机理.同时,分别采用能谱仪、显微硬度计和摩擦磨损试验机对复合镀层的成分、硬度和摩擦因数进行分析,最终确定了制备该复合镀层的较优工艺参数.结果显示:喷头移动速度对颗粒复合量的影响最为显著;颗粒复合量越大,复合镀层硬度越高、摩擦因数越低;在较优工艺参数下制备的Co-CF3C2复合镀层的Cr3C2颗粒含量高达23.6％.
参考文献
| [1] | 薛玉君;刘红彬;兰明明;库祥臣;李济顺.超声条件下脉冲电沉积Ni-CeO2纳米复合镀层的高温抗氧化性[J].中国有色金属学报,2010(8):1599-1604. |
| [2] | Y. Zhang;X. Peng;F. Wang.Development and oxidation at 800℃ of a novel electrodeposited Ni-Cr nanocomposite film[J].Materials Letters,20046(6):1134-1138. |
| [3] | Uwe Schulz;Christoph Leyens;Klaus Fritscher;Manfred Peters;Bilge Saruhan-Brings;Odile Lavigne;Jean-Marc Dorvaux;Martine Poulain;Remy Mevrel;Michaeel Caliez.Some recent trends in research and technology of advanced thermal barrier coatings[J].Aerospace science and technology,20031(1):73-80. |
| [4] | Huibin Xu;Hongbo Guo;Fushun Liu;Shengkai Gong.Development of gradient thermal barrier coatings and their hot-fatigue behavior[J].Surface & Coatings Technology,20001(1):133-139. |
| [5] | 兰龙;谭俊;杜军;王猛.超声波辅助选择性电沉积技术研究进展[J].中国机械工程,2015(9):1260-1270. |
| [6] | N. V. Myung;K. Nobe.Electrodeposited Iron Group Thin-Film Alloys Structure-Property Relationships[J].Journal of the Electrochemical Society,20013(3):C136-C144. |
| [7] | 牛晓敏;夏亚涛.超声波在电沉积过程中的应用[J].热加工工艺,2010(24):228-230. |
| [8] | Sagar A. Gadkari;Taysir H. Nayfeh.Micro fabrication using electro deposition and ultrasonic acoustic liquid manipulation[J].The International Journal of Advanced Manufacturing Technology,20081/2(1/2):107-117. |
| [9] | 李昌明;赵灵智;刘志平;张仁元;李伟善.超声在电沉积锡基碳纳米管复合材料中应用[J].金属功能材料,2009(2):37-40. |
| [10] | 梁燕;许韵华;范爽;郑福才;曾一珂;李岑.高频脉冲电沉积镍-钴合金镀层的耐蚀性[J].电镀与精饰,2009(9):32-35. |
| [11] | Vaezi MR;Sadrnezhaad SK;Nikzad L.Electrodeposition of Ni-SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics[J].Colloids and Surfaces, A. Physicochemical and Engineering Aspects,20081/3(1/3):176-182. |
| [12] | L. Benea;P. L. Bonora;A. Borello;S. Martelli.Effect of SiC size dimensions on the corrosion wear resistance of the electrodeposited composite coating[J].Materials and Corrosion,20021(1):23-29. |
| [13] | Shi L;Sun CF;Gao P;Zhou F;Liu WM.Electrodeposition and characterization of Ni-Co-carbon nanotubes composite coatings[J].Surface & Coatings Technology,200616/17(16/17):4870-4875. |
| [14] | Aal AA;Bahgat M;Radwan M.Nanostructured Ni-AlN composite coatings[J].Surface & Coatings Technology,20066(6):2910-2918. |
| [15] | 王栋;张秀丽;赵汉雨;李云东.峰值电流密度对脉冲电沉积Ni-Co-CNTs复合镀层机械性能的影响[J].电镀与环保,2012(1):22-25. |
| [16] | Mahdavi, S.;Allahkaram, S.R..Characteristics of electrodeposited cobalt and titania nano-reinforced cobalt composite coatings[J].Surface & Coatings Technology,2013:198-203. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%