为明确金尾矿蒸压加气混凝土制品的水化机理和微观结构的内在关系，通过对比硬化坯体（ NAC）、蒸压恒温养护0 h（ AAC－0）和蒸压恒温养护8 h（ AAC－8）的3组样品的XRD谱、IR谱图分析其水化产物种类的变化，并对比SEM照片分析了其微观结构变化。研究结果表明，随着蒸压养护过程的进行，坯体内的水化产物出现阶段性变化，最终由富钙型水化硅酸钙向托贝莫来石转化，由于托贝莫来石生成的局限性和同步性，导致微观孔壁结构出现明显的分层现象，后生成的托贝莫来石层使孔结构成为中空的刚性球，作为“骨料”，起到骨架和支撑的作用。
To research the relationship between hydration mechanism and microstructure of autoclaved aerated?gold tailings concrete products, three samples, the hardening body(NAC), the product only by heating and cooling in the autoclaved kettle( AAC-0) and the product of autoclave constant temperature curing eight hour (AAC-8), were made. The XRD, IR and SEM patterns of those samples were compared by analyzing the changes of hydration products and microstructure. The results showed that as the process of steam curing went by, hydration products inside the body would transform from calcium?rich calcium silicate hydrates to tobermorites. Because the limitations and synchronization of the generation of tobermorites would lead to apparent stratification in the pore structures, the layer composed by tobermorites made the structure of pore into hollow rigid spheres and played a role in being skeletons and proping as “aggregate”.
参考文献
| [1] | 李礼,谢超,陈冬梅,冯一鸣.金尾矿综合利用技术研究与应用进展[J].能源环境保护,2012(03):1-4. |
| [2] | 黄建忠,王吉位.2010-2011年度大宗工业固体废物综合利用发展报告[M].北京:中国轻工业出版社, 2012.,2012. |
| [3] | 李德忠,倪文,张静文,吴辉,张玉燕.铁尾矿在蒸压养护过程中的物相变化[J].硅酸盐学报,2011(04):708-713. |
| [4] | BOUVARD D, CHAIX J M, DENDIEVEL R, et al . Characterization and simulation of microstructure and properties of EPS light-weight concrete[J].Cement and Concrete Research,2007,37 |
| [5] | 聂轶苗,马鸿文,刘贺,张盼,邱美娅,王蕾.水热条件下钾长石的分解反应机理[J].硅酸盐学报,2006(07):846-850,867. |
| [6] | 张云升,孙伟,贾艳涛,金祖权.用IR探索地聚合物水泥硬化产物的组成和结构[J].武汉理工大学学报,2005(11):27-30. |
| [7] | 祝丽萍. 赤泥-矿渣胶结剂制备全尾矿砂膏体充填料[D]. 北京:北京科技大学, 2012.,2012. |
| [8] | CLAYDEN N J, ESPOSITO S, ARONNE A, et al. Solid state 27Al NMR and FTIR study of lanthanum aluminosilicate glasses [J]. J Non-Cryst Solids, 1999, 258:11-19.,1999. |
| [9] | 杨南如 .C-S-H 凝胶结构模型研究新进展[J].南京化工大学学报,1998,20(2):78-85. YANG Nanru. Progress in the investigation of structural model of C-S-H gel[J].Journal of Nan Jing University of Chemical Technology, 1998, 20 (2):78-85.,1998. |
| [10] | COLEMAN N J, TRICE C J, NICHOLSON J W . 11 Å tobermorite fromcement bypass dust andwaste container glass:A feasibility study[J].Int J Miner Process,2009,93 |
| [11] | 王智,郑洪伟,韦迎春.钙矾石形成与稳定及对材料性能影响的综述[J].混凝土,2001(06):44-48,56. |
| [12] | 黄晓燕,倪文,王中杰,钱嘉伟,祝丽萍.铜尾矿制备无石灰加气混凝土的试验研究[J].材料科学与工艺,2012(01):11-15. |
| [13] | HU Lya Kus, THOMAS Carlsson . Microstructural investigations of naturally and artificially weathered autoclaved aerated concrete[J].Cement and Concrete Research,2003,33 |
| [14] | NARAYANAN N, RAMAMURTHY K . Microstructural investigations on aerated concrete[J].Cement and Concrete Research,2000,30 |
| [15] | 聂轶苗,马鸿文,杨静,苏玉柱,李如臣,高飞.矿物聚合材料固化过程中的聚合反应机理研究[J].现代地质,2006(02):340-346. |
| [16] | 桂苗苗,蔡振哲.蒸压加气混凝土性能比较及微观分析[J].武汉理工大学学报,2011(06):31-35. |
| [17] | CABRILLAC R U, MALOU Z . Mechanical modeliza-tion of anisotropic porous materials with a homogeniza-tion method. Application to erated concretes[J].Con-struction and Building Materials,2000,14 |
| [18] | SCHNEIDER Thomas, GREIL Peter, SCHOBER Georg . Strength modeling of brittle materials with two-and three-dimensional pore structures[J].Computa-tional Materials Science,1999,16 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%