以纯金属为原料，采用磁悬浮熔炼-铜模吸铸法制备了直径不同(即冷却速率不同)的块状(Zr56 Co28 Al16)98 Y2非晶合金，同时采用冷却速率更高的甩带法制备了同成分的条带状非晶合金，研究了冷却速率对该合金显微结构和力学性能的影响。结果表明：随着冷却速率降低，块状非晶合金的塑性降低，硬度增大，非晶合金中冻结的自由体积减小，非晶合金基体内逐渐有纳米晶析出，但这并没有提高合金的塑性；自由体积更多的合金具有更高的塑性。
Taking pure metal as raw materials,bulk amorphous alloy (Zr56 Co28 Al16 )98 Y2 with different diameters (different cooling rates )was fabricated by magnetic floating melting and water-cooling copper mold techniques,and amorphous ribbon with same composition was fabricated by melt spinning method with high cooling rate.The effects of cooling rate on microstructure and mechanical properties were studied.The results indicate that with the decrease of cooling rate,plasticity of bulk amorphous alloy decreased,while its hardness increased,and the free volume in amorphous alloy decreased.In addition,there were nanocrystals embedded in the amorphous matrix. The plasticity,however,was not enhanced by the absence precipitation of nanocrystals.The more free-volume would result in a better plasticity of the amorphous alloy.
参考文献
| [1] | Wang WH;Dong C;Shek CH.Bulk metallic glasses[J].Materials Science & Engineering, R. Reports: A Review Journal,20042/3(2/3):45-89. |
| [2] | 李翔;严彪;杜春风;董刚.铁基非晶及纳米晶合金在NaCl溶液中的电化学腐蚀行为[J].机械工程材料,2009(11):76-78. |
| [3] | T. Zhang;A. Inoue.Formation, thermal and mechanical properties of bulk glassy alloys in Zr-Al-Co and Zr-Al-Co-Cu systems[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20040(0):432-435. |
| [4] | X.F. ZHANG;Y.M. WANG;J.B. QIANG.Optimum Zr-Al-Co bulk metallic glass composition Zr_(53)Al_(23.5)Co_(23.5)[J].Intermetallics,200410/11(10/11):1275-1278. |
| [5] | Huang YJ;Shen J;Sun JF.Bulk metallic glasses: Smaller is softer[J].Applied physics letters,20078(8):81919-1-81919-3-0. |
| [6] | Chunyan Li;Shengzhong Koua;Yanchun Zhao;Guangqiao Liu;Yutian Ding.Effect of cooling rate on plastic deformation of Zr-based bulk metallic glasses[J].自然科学进展（英文版）,2012(01):21-25. |
| [7] | 李春燕;寇生中;赵燕春;曹杰;袁子洲.Zr63.36Cu14.52Ni10.12Al12非晶合金的大塑性与尺寸效应[J].中国科学（物理学 力学 天文学）,2012(6):571-576. |
| [8] | 赵燕春;寇生中;袁小鹏;李春燕;于朋;蒲永亮.冷却速度对Cu46Zr44Al5Nb5块体非晶合金组织和力学性能的影响[J].稀有金属,2014(2):171-175. |
| [9] | Shengli Zhu;Guoqiang Xie;Hao Wang.Zr-baseci bulk metallic glass composite with in situ precipitated nanocrystals[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2014:155-158. |
| [10] | S. Jana;U. Ramamurty;K. Chattopadhyay.Subsurface deformation during Vickers indentation of bulk metallic glasses[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20040(0):1191-1195. |
| [11] | J. Shen;Y.J. Huang;J.F. Sun.Plasticity of a TiCu-based bulk metallic glass: Effect of cooling rate[J].Journal of Materials Research,200711(11):3067-3074. |
| [12] | 武晓峰;张海峰;李宏;王爱民;杨洪才;胡壮麒.Zr基大块非晶合金的微区变形及力学性能[J].中国有色金属学报,2003(6):1368-1373. |
| [13] | Liu Y;Bei H;Liu CT;George EP.Cooling-rate induced softening in a Zr50Cu50 bulk metallic glass[J].Applied physics letters,20077(7):71909-1-71909-3-0. |
| [14] | M. Calin;J. Eckert;L. Schultz.Improved mechanical behavior of Cu-Ti-based bulk metallic glass by in situ formation of nanoscale precipitates[J].Scripta materialia,20036(6):653-658. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%