采用大型非线性动力学软件PAM-CRASH,分别建立了三种铺层角度GLARE层板复合材料简单平板和飞机尾翼典型前缘结构的有限元模型,对三种平板和结构进行抗鸟撞有限元模拟,研究了不同铺层角度GLARE层板复合材料的抗鸟撞性能,并进行了试验验证。结果表明：对于厚度相同的GLARE层板复合材料,铺层角度为±45°正交铺层方式的平板和结构的吸能量效果最佳,抗鸟撞性能最优；铺层角度为0°/90°正交铺层方式的次之,0°/45°/－45°/90°铺层方式的最差；试验得到的三种铺层结构的破坏形态、面积以及撞击点附近某点的应变时程曲线与模拟结果一致,说明建立的有限元模型正确。
Two finite element models for simple planes and tailplane front structures of GLARE laminate composite with three kinds of ply angles were built by the nonlinear dynamics software PAM-CRASH,and then bird impact finite element simulation was carried out on the simple planes and structures by the software.The bird impact resistance of GLARE laminate composite with different ply angles was studied,and experiment verification was carried out.The results show that,for the laminate composite with same thickness,the plane and the structure with cross-ply structure ±45°had the best absorption energy effect and bird-impact resistance,and followed by the planes and the structures with 0°/90°and 0°/45°/-45°/90°.The destruction pattern,destruction area and strain-time curve of a point near the impact location got from experiment were consistent with those got from simulation, indictating that the finite element model is correct.
参考文献
| [1] | 姚小虎;韩强;张晓晴;赵隆茂.飞机圆弧风挡抗鸟撞试验研究[J].爆炸与冲击,2005(5):417-422. |
| [2] | 武存浩 .飞机圆弧风挡抗鸟撞试验与设计研究[D].北京航空航天大学,2002. |
| [3] | 万玉敏;张发;竺铝涛.泡沫夹层复合材料与复合材料层合板低速冲击性能的比较[J].机械工程材料,2014(7):90-94,98. |
| [4] | 瞿承玮;郑百林.GLARE层板鸟撞数值模拟分析[J].力学季刊,2007(1):65-69. |
| [5] | 权国政;武东森;李贵胜.E-玻璃纤维2D编织层铺增强复合材料的损伤力学本构模型及应用[J].机械工程材料,2014(4):67-72,104. |
| [6] | 陈卫锋;万小朋;赵美英.Glare层合板的抗鸟撞分析[J].航空计算技术,2010(6):99-103. |
| [7] | 田东翔 .汽车与波形梁护栏碰撞仿真研究[D].长安大学,2012. |
| [8] | M. A. McCARTHY;J. R. XIAO;N. PETRINIC.Modelling of Bird Strike on an Aircraft Wing Leading Edge Made from Fibre Metal Laminates - Part 1: Material Modelling[J].Applied composite materials,20045(5):295-315. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%