通过固定尖晶石总含量(质量分数23.5%),改变轻烧和死烧MA90尖晶石质量比制备了不同轻烧尖晶石含量的刚玉-尖晶石浇注料,在1600℃下进行了钢包渣侵蚀试验,研究了轻烧尖晶石含量对该浇注料显微结构和抗渣性能的影响.结果表明:随着轻烧尖晶石质量分数从0增加到23.5%,浇注料的线收缩率增大、显气孔率和体积密度基本不变、强度降低;侵蚀后基体中出现裂纹,且轻烧尖晶石含量较高的裂纹较多;随着轻烧尖晶石含量的增加,浇注料的抗渣侵蚀性逐渐降低,抗渣渗透性逐渐增强;当轻烧尖晶石质量分数为17.6%时,其综合性能最好,显气孔率为15.7%,抗折和耐压强度分别为26.9,107.8 MPa,侵蚀指数和渗透指数分别为0.32和0.91.
The corundum-spinel castables with different light-burned spinel content were prepared by fixing total spinel content of 23.5wt% and changing the mass ratio of light-burned and dead-burned MA90 spinel,and then the ladle slag corrosion tests were conducted at 1 600 ℃.The microstructures and slag resistance of the castables were studied.The results show that with the light-burned spinel content increased from 0 to 23.5wt%,the linear shrinkage of the castables increased,the apparent porosity and volume density remained unchanged,and strengths decreased.The cracks were observed in the uncorroded matrix and more cracks were observed in the matrix with a higher content of light-burned spinel after corrosion.With the increase of light-burned spinel content,the slag corrosion resistance of the castables decreased while the slag penetration resistance increased.When the light-burned spinel content was 17.6wt%,the specimen had the optimum performance,which was with the porosity of 15.7%, flexural strength of 26.9 MPa,crushing strength of 107.8 MPa,slag corrosion index of 0.32 and penetration index of 0.91.
参考文献
[1] | Fu, Lvping;Gu, Huazhi;Huang, Ao;Zhang, Meijie;Hong, Xueqin;Jin, Linwen.Possible improvements of alumina-magnesia castable by lightweight microporous aggregates[J].CERAMICS INTERNATIONAL,20151 Pt.B(1 Pt.B):1263-1270. |
[2] | Wen Yan;Nan Li;Zheng Miao.Influence of the properties of corundum aggregates on the strength and slag resistance of refractory castables[J].Journal of Ceramic Processing Research. (Text in English),20123(3):278-282. |
[3] | 李享成;刘恩云;李明威;刘胤;张明杰;肖小华;朱伯铨.低Cr2O3含量Al2O3-MgO浇注料物理性能及物相变化研究[J].硅酸盐通报,2010(5):1128-1132. |
[4] | Liang, Yonghe;Huang, Ao;Zhu, Xinwei;Gu, Huazhi;Fu, Lvping.Dynamic slag/refractory interaction of lightweight Al2O3-MgO castable for refining ladle[J].CERAMICS INTERNATIONAL,20156(6):8149-8154. |
[5] | AO HUANG;HUAZHI GU;MEIJIE ZHANG.Mathematical Modeling on Erosion Characteristics of Refining Ladle Lining with Application of Purging Plug[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,20133(3):744-749. |
[6] | Wen Yan;Xiaoli Lin;Junfeng Chen.Effect of TiO_2 addition on microstructure and strength of porous spinel (MgAl_2O_4) ceramics prepared from magnesite and Al(OH)_3[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2015:287-291. |
[7] | Yan, Wen;Chen, Junfeng;Li, Nan;Qiu, Wendong;Wei, Yaowu;Han, Bingqiang.Preparation and characterization of porous MgO-Al2O3 refractory aggregates using an in-situ decomposition pore-forming technique[J].CERAMICS INTERNATIONAL,20151 Pt.A(1 Pt.A):515-520. |
[8] | 鄢文;李楠;韩兵强.镁砂细粉加入量对轻骨料刚玉-尖晶石浇注料性能的影响[J].耐火材料,2010(2):104-107. |
[9] | Fu, Lvping;Gu, Huazhi;Huang, Ao;Zhang, Meijie;Li, Zhengkun.Slag Resistance Mechanism of Lightweight Microporous Corundum Aggregate[J].Journal of the American Ceramic Society,20155(5):1658-1663. |
[10] | 王俊涛;陈松林;袁林;赵洪亮;曾鲁举;刘锡俊;陈雪峰.ZrO2对刚玉-尖晶石浇注料抗热震性能的影响[J].硅酸盐学报,2011(8):1317-1322. |
[11] | 魏耀武;李楠;梁新亮.富镁尖晶石细粉对镁铝浇注料性能的影响[J].硅酸盐通报,2007(3):557-560. |
[12] | 方选明;李楠;鄢文.尖晶石性质对刚玉-尖晶石不烧砖抗渣性的影响[J].耐火材料,2011(1):14-17. |
[13] | Yan, Wen;Chen, Junfeng;Li, Nan;Qiu, Wendong;Ouyang, Junhua;He, Xiaojun.Influence of light-burned spinel on the slag resistance of alumina-spinel refractory castables[J].Journal of Ceramic Processing Research. (Text in English),20146(6):441-446. |
[14] | Wen Yan;Nan Li;Bingqiang Han.Influence of Microsilica Content on the Slag Resistance of Castables Containing Porous Corundum-Spinel Aggregates[J].International journal of applied ceramic technology,20086(6):633-640. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%