材料期刊网

以碳纤维单轴向缝编织物为研究对象,开展了树脂体系及其复合工艺、织物结构参数和碳纤维种类对碳纤维单轴向缝编织物使用工艺性及其复合材料主要力学性能的影响研究.结果表明:经向碳纤维和衬纬材料的种类及其面密度等结构参数对织物弯曲硬挺度和织物单向渗透率的影响规律基本相似;无论是碳纤维缝编织物单向渗透率还是复合材料的主要力学强度,真空吸附工艺中,基于TDE-85环氧树脂的自制6#环氧树脂体系均明显优于市售用基于双酚A环氧树脂的环氧树脂体系;采用610A树脂预浸料工艺、或经向碳纤维的适当展纱、或干喷湿法纺丝技术制备的碳纤维,均有利于进一步提高碳纤维单轴向缝编织物复合材料的主要力学性能.这为碳纤维缝编织物结构设计、主要原材料选择、制备工艺、配套树脂体系及其复合工艺等选择优化提供一些参考,为碳纤维缝编织物、尤其是为国产碳纤维缝编织物的制备和推广应用奠定了良好基础.

In this paper,the influence of carbon,fabric structure,resin and processing on the properties of carbon fiber uniaxial stitch bonded fabrics and its composite was studied.The results show that the fabric structural parameters,such as the types and the area density of warp carbon and weft material,have the same influence on the bending stiffness and the unidirectional permeability coefficient of the fabric.The No.6 epoxy resin compound based on TDE85 has obvious advantages than the other epoxy resin compounds based on Bisphenol A,on improving the unidirectional permeability coefficient of the fabric and the mechanical strength of the fabric composite.The mechanical strength of the fabric composite benefit from the process of hot-melt prepreg based on 610A resin,spreading of the warp carbon fiber and the carbon fiber of dry-jet-wet electrospinning process.