推导了连铸过程中二冷喷淋强度与连铸参数之间的关系,比较了喷淋强度对2种断面连铸坯凝固组织的影响.结果表明,喷淋强度能更精确地反映铸坯凝固组织与冷却参数间的关系;铸坯表面的枝晶间距为20 μtm左右,而中心区为200～350 μ.tm;距表面相同距离,对角线区的枝晶比横向细小.喷淋强度相近时铸坯的凝固规律为:200 mm×200 mm断面中心区组织较细小,150 mm×150 mm断面近中心区组织较细小.从铸坯表面到中心整体上符合凝固曲线左侧规律,但断面大于200 mm×200 mm的连铸坯,中心和近中心区凝固时符合凝固曲线右侧规律.
参考文献
| [1] | WANG Xian-yong,LIU Qing,WANG Bao,et al .Optimal Control of Secondary Cooling for Medium Thickness Slab Continuous Casting[J].Ironmaking and Steelmaking,2011,38(7):552.,2011. |
| [2] | 陈登福,曾丁丁,孙跃,苏玉刚,罗敏,梁新亮,刘远岩,谢集祥.150 mm×150 mm方坯连铸高效化的二冷技术[J].特殊钢,2004(03):42-45. |
| [3] | 杨跃标,祭程,罗森,杨吉林,曹磊,朱苗勇.连铸动态二冷控制模型的开发与应用[J].钢铁,2010(09):48-52. |
| [4] | Pierer R,Bernhard C .On the Influence of Carbon on Secondary Dendrite Arm Spacing in Steel[J].J Mater Sci,2008,43 |
| [5] | Cicutti C,Boeri R .On the Relationship Between Primary and Secondary Dendrite Arm Spacing in Continuous Casting Products[J].Scripta Materialia,2001,45 |
| [6] | LONG Mu-jun,ZHANG Li-feng,LU Fei .A Simple Model to Calculate Dendrite Growth Rate during Steel Continuous Casting Process[J].ISIJ International,2010,50(12):1792.,2010. |
| [7] | GUO Wei,ZHANG Li-feng,ZHU Miao-yong .Modeling on Dendrite Growth of Medium Carbon Steel During Continuous Casting[J].Steel Research Int,2010,81(4):265.,2010. |
| [8] | Alizadeh M .Correlation Between the Continuous Casting Parametem and Secondary Dendrite Arm Spacing in the Mold Region[J].Materials Letters,2013,91 |
| [9] | El-Bealy M O .Ak-Water Mist and Homogeneity Degree of Spray Cooling Zones for Improving Quality in Continuous Casting of Steel[J].Steel Research Int,2011,82(10):1187.,2011. |
| [10] | Ito Y,Murai T,Miki Y,et al .Development of Hard Secondary Cooling by High-Pressure Water Spray in Continuous Casting[J].ISIJ International,2011,51(9):1454.,2011. |
| [11] | 孙猛,王叶婷,徐磊,沈厚发.板坯动态二冷增量型PID控制研究[J].钢铁,2011(01):34-38. |
| [12] | 张群亮.宝钢在线二冷控制模型的研发与应用[J].钢铁,2012(03):30-33,64. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%