概述了第3代汽车用中锰钢的研究现状及进展,介绍了已开发的中锰钢的化学成分及其设计依据,分析了不同合金元素对中锰钢组织和性能的影响,揭示了中锰钢的高强度、高塑性和高加工硬化率的形成机制,讨论了逆相变退火工艺与拉伸行为的关系,并对中锰钢的未来应用领域进行了预测.
参考文献
| [1] | Hamada AS;Karjalainen LP;Somani MC .The influence of aluminum on hot deformation behavior and tensile properties of high-Mn TWIP steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1-2):114-124. |
| [2] | A. Grajcar;E. Kalinowska-Ozgowicz;M. Opiela;B. Grzegorczyk;K. Golombek .Effects of Mn and Nb on the macro- and microsegregation in high-Mn high-Al content TRIP steels[J].Archives of Materials Science and Engineering,2011(1):5-14. |
| [3] | 曹佳丽,赵爱民,李振,尹鸿祥,黄耀.超细晶中锰钢温轧强化增塑机理[J].北京科技大学学报,2013(11):1465-1471. |
| [4] | Jie Shi;Xinjun Sun;Maoqiu Wang;Weijun Hui;Han Dong;Wenquan Cao .Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite[J].Scripta materialia,2010(8):815-818. |
| [5] | Arlazarov, A.;Gouné, M.;Bouaziz, O.;Hazotte, A.;Petitgand, G.;Barges, P..Evolution of microstructure and mechanical properties of medium Mn steels during double annealing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:31-39. |
| [6] | 徐文欢,孙荣民,王存宇,周荣,时捷,曹文全.冷轧中锰钢的成形性能[J].钢铁,2012(11):63-68,78. |
| [7] | P.J. GIBBS;E. DE-MOOR;M. J. MERWIN .Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2011(12):3691-3702. |
| [8] | SANGWON LEE;BRUNO C. DE COOMAN .Tensile Behavior of Intercritically Annealed 10 pct Mn Multi-phase Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2014(2):709-716. |
| [9] | Aydin, H.;Essadiqi, E.;Jung, I.-H.;Yue, S..Development of 3rd generation AHSS with medium Mn content alloying compositions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:501-508. |
| [10] | SEAWOONG LEE;SEOK-JAE LEE;S. SANTHOSH KUMAR .Localized Deformation in Multiphase, Ultra-Fine-Grained 6 Pct Mn Transformation-Induced Plasticity Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2011(12):3638-3651. |
| [11] | 李楠,时捷,王存宇,赵晖,陈为亮,惠卫军,曹文全.两相区退火时间对冷轧中锰钢组织和力学性能的影响[J].材料热处理学报,2011(08):74-78. |
| [12] | SEAWOONG LEE;YURI ESTRIN;BRUNO C. DE COOMAN .Constitutive Modeling of the Mechanical Properties of V-added Medium Manganese TRIP Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2013(7):3136-3146. |
| [13] | 赵晖,时捷,李楠,王存宇,胡劲,惠卫军,曹文全.Si对中锰钢淬火配分组织和性能的影响[J].材料研究学报,2011(01):45-50. |
| [14] | Grassel O.;Frommeyer G.;Meyer LW.;Kruger L. .High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - application[J].International Journal of Plasticity,2000(10/11):1391-1409. |
| [15] | Tae-Ho Lee;Eunjoo Shin;Chang-Seok Oh .Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels[J].Acta materialia,2010(8):3173-3186. |
| [16] | BRUNO C. DE COOMAN;PAUL GIBBS;SEAWOONG LEE .Transmission Electron Microscopy Analysis of Yielding in Ultrafine-Grained Medium Mn Transformation-Induced Plasticity Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2013(6):2563-2572. |
| [17] | CAO WenQuan,WANG Chang,WANG CunYu,SHI Jie,WANG MaoQiu,DONG Han,WENG YuQing.Microstructures and mechanical properties of the third generation automobile steels fabricated by ART-annealing[J].中国科学:技术科学（英文版）,2012(07):1814-1822. |
| [18] | 邱从怀,申勇峰,薛文颖,王沿东.Fe－20Mn－0．6C 高锰 TRIP/TWIP 钢微观组织表征[J].应用科技,2013(02):76-80. |
| [19] | JIAJUN WANG;SYBRAND VAN DER ZWAAG .Stabilization Mechanisms of Retained Austenite in Transformation-Induced Plasticity Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(6):1527-1539. |
| [20] | R. Sun;W. Xu;C. Wang .Work Hardening Behavior of Ultrafine Grained Duplex Medium-Mn Steels Processed by ART-Annealing[J].Steel Research International,2012(4):316-321. |
| [21] | SEAWOONG LEE;BRUNO C. DE COOMAN .On the Selection of the Optimal Intercritical Annealing Temperature for Medium Mn TRIP Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2013(11):5018-5024. |
| [22] | Emmanuel De Moor .Austenite stabilization through manganese enrichment[J].Scripta materialia,2011(2):185-188. |
| [23] | Chang WANG;Jie SHI;Cun Yu WANG .Development of Ultrafine Lamellar Ferrite and Austenite Duplex Structure in 0.2C5Mn Steel during ART-annealing[J].ISIJ International,2011(4):651-656. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%