欢迎登录材料期刊网

材料期刊网

高级检索

详细介绍了山东富伦钢铁厂新建的国内首台2机2流不同断面板坯连铸机结晶器锥度动态保持技术的功能、设备构成和液压、电气控制原理,并推导得出浇注过程中结晶器宽边减轻力、碟簧预紧力与钢水静压力之间的定量关系。从2013年10月9日该技术正式投入使用至2013年11月12日,累计浇钢41860 t,每个浇次平均连浇14炉,最大拉速可达1.4 m/min,彻底避免了跑锥问题,可使左、右锥度始终保持在±0.5 mm以内,铸坯内外部质量优良,实际使用效果令人满意。

Shandong fulun Steel has built the first two-strand slab continuous caster for producing products with different sections. The functions and equipment structure together with the hydraulic and electric control principle of taper dynamic balance technology of the slab continuous caster were presented. The quantitative relationship of pressure reduction on mold broadside, disc spring pre-tightening force and the static pressure of liquid steel in the process of casting was de-rived. From the application of this technology on October 9, 2013 to November 12, 2013, 41 860 t slab has been cumula-tively casted, 14 heats on average were continuously cast for every casting sequence, and the maximum casting speed is 1.4 m/min. In the meantime, no taper change happens and the left and right tapers are always kept in ±0.5 mm. The inter-nal and external qualities of slab are excellent, and actual application effect is satisfactory.

参考文献

[1] 邹冰梅;刘;鲁军.板坯连铸机结晶器锥度变化分析与改进[J].钢铁技术,2011(02):21.
[2] 陶红标,吕晓军,席常锁,张慧,吴夜明,干勇.薄板坯连铸结晶器锥度设计技术研究及应用[J].钢铁,2012(01):28-33.
[3] 黄怀富,王东亮,张小辉.板坯结晶器锥度不稳定分析与控制[J].连铸,2011(03):23-27.
[4] 张树存.在线调宽装置在板坯连铸机结晶器上的应用[J].冶金设备,2006(01):30-32.
[5] 陈兴宇.结晶器在线调宽及技术[J].南方钢铁,1998(02):28.
[6] 橘高节生.板坯用高速调宽结晶器的开发[J].重钢技术,2003(04):16.
[7] 付江华,李建锋,傅昊.结晶器调宽装置跑锥的分析与预防措施[J].重型机械,2010(z1):184-186.
[8] 王文学,刘赵卫,王受田,赵敏,杨超武,雷华,曾晶.板坯连铸机组合式结晶器跑锥问题的分析与改进[J].重型机械,2010(04):62-64,67.
[9] 周卓锁,张传令,李井锋,程瑞宾.板坯连铸机结晶器跑锥的改进[J].河北冶金,2009(04):39-41.
[10] 李凤阁.板坯连铸新工艺、新技术与质量控制实用手册[M].北京:冶金工业出版社,2005
[11] 马勤学.结晶器在线调宽技术及其应用[J].炼钢,1998(02):3.
[12] 刘明延;李平;栾兴家.板坯连铸机设计与计算[M].北京:机械工业出版社,1990
[13] 高琦,张小龙,杨拉道,王永洪.结晶器在线热态调宽液压缸推力计算[J].铸造技术,2010(11):1464-1467.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%