欢迎登录材料期刊网

材料期刊网

高级检索

为研究异步轧制搓轧区的几何参数,根据力平衡方程和秒流量相等的原则,建立了无张力条件下不同变形区组态的中性角和搓轧区比例计算模型,并按中性角取值对不同变形区组态进行划分。在三区组态的条件下,分析讨论了异速比、摩擦因数、轧件厚度和压下率对搓轧区比例的影响。搓轧区比例是决定异步轧制在降低轧制力、最小可轧厚度和得到细化组织工艺条件的重要参数,搓轧区比例计算模型的建立,为异步轧制工艺参数的设定提供了理论依据。中性角和搓轧区比例计算式经过试验验证,与实际值吻合。

The calculation formulas of geometric parameters,such as neutral angles and cross shear ratio in asymmetrical rolling were found. Different types of deformation region in asymmetrical rolling were distinguished by the values of neu-tral angles. The influences of speed ratio,friction coefficient,entry thickness and reduction ratio on the value of cross shear ratio were analyzed by the formula for cross shear ratio established in this study. The cross shear ratio is one of the most important parameters in asymmetrical rolling which determines the rolling force the asymmetrical rolling can reduce. The cross shear ratio can also influence the permissible minimum thickness and the micro-structure of rolled piece. The formula to calculate the cross shear ratio provides the theoretical foundation for the parameter optimization of asymmetri-cal rolling process.The results of rolling experiment proved that the formulae for calculating the neutral angles and cross shear ratio are consistent with the reality.

参考文献

[1] 张正贵,祝晓波,刘沿东,王福,左良.形变对无取向硅钢冷轧织构的影响[J].钢铁研究学报,2008(05):41-44,62.
[2] S. H. Zhang;D. W. Zhao;C. R. Gao;G. D. Wang .Analysis of asymmetrical sheet rolling by slab method[J].International Journal of Mechanical Sciences,2012(1):168-176.
[3] TANG De-lin,LIU Xiang-hua,LI Xiang-yu,PENG Liang-gui.Permissible Minimum Thickness in Asymmetrical Cold Rolling[J].钢铁研究学报(英文版),2013(11):21-26.
[4] 夏伟军,蔡建国,陈振华,陈刚,蒋俊峰.异步轧制AZ31镁合金的微观组织与室温成形性能[J].中国有色金属学报,2010(07):1247-1253.
[5] 蒋建华,丁毅,陈云龙,单爱党.异步轧制TWIP钢的力学性能和微观组织[J].钢铁,2011(11):77-81.
[6] 李维刚,郭朝晖,刘相华.热轧带钢窜辊策略与综合辊型的研究及应用[J].钢铁,2012(09):43-49.
[7] 李维刚,刘相华,易剑,郭朝晖.热轧带钢变行程窜辊策略优化模型[J].钢铁,2012(03):46-50.
[8] 李维刚,刘相华.热轧工作辊变行程横移策略及其优化研究[J].钢铁研究学报,2014(03):21-26.
[9] 刘相华,张广基.变厚度轧制过程力平衡微分方程[J].钢铁研究学报,2012(04):10-13,18.
[10] A. HALLOUMT;CH. DESRAYAUD;B. BACROIX .A SIMPLE ANALYTICAL MODEL OF ASYMMETRIC ROLLING[J].Archives of Metallurgy and Materials,2012(2):425-436.
[11] LIU Jie;Kawalla;Rudolf .Influence of asymmetric hot rolling on microstructure and rolling force with austenitic steel[J].Transactions of Nonferrous Metals Society of China,2012,22(02):504.
[12] Gao H;Ramalingam S C;Barber G C et al.Analysis of asym-metrical cold rolling with varying coefficients of friction[J].Journal of Materials Processing Technology,2002,124(01):178.
[13] HAO Liang,DI Hong-shuang,GONG Dian-yao.Analysis of Sheet Curvature in Asymmetrical Cold Rolling[J].钢铁研究学报(英文版),2013(05):34-37.
[14] Angella, G.;Esfandiar Jahromi, B.;Vedani, M..A comparison between equal channel angular pressing and asymmetric rolling of silver in the severe plastic deformation regime[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:742-750.
[15] Somjeet Biswas;Dong-Ik Kim;Satyam Suwas .Asymmetric and symmetric rolling of magnesium:Evolution of microstructure,texture and mechanical properties[J].Materials Science and En-gineering:A,2012,550(30):19.
[16] 莫成刚,刘刚,刘金阳,武保林,左良.3%无取向硅钢薄板的表面纳米化结构与性能[J].材料与冶金学报,2012(01):43-46,53.
[17] 吕爱强,张洋,李瑛,刘刚,刘春明.异步轧制对表面纳米化316L不锈钢组织和性能的影响[J].金属学报,2005(03):271-276.
[18] 赵正才,宋美君,汪木其.全异步轧制的塑性力学和O.霍夫曼公式[J].应用科学学报,1990(03):223-231.
[19] 王军丽.超细晶铜材大变形异步叠轧制备技术[M].北京:冶金工业出版社,2011
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%