欢迎登录材料期刊网

材料期刊网

高级检索

为降低高碳钢连铸方坯中偏析元素(碳、锰)沿拉坯方向分布的不均匀性,对70高碳钢(W([C])=0.7%)连铸方坯(170 mm×170 mm)拉坯方向碳、锰元素的分布特征及机理展开研究.在连铸坯中心纵断面的柱状晶区、混晶区与等轴晶区的代表位置,对碳、锰元素分布进行测量.研究结果表明,70高碳钢连铸方坯中心纵断面沿拉坯方向碳、锰元素的分布存在明显波动,且碳元素的波动程度大于锰元素;强冷工艺下,在不同位置碳、锰元素分布变得更为均匀的同时,其质量分数沿拉坯方向的波动程度也有所降低;在柱状晶区、混晶区和等轴晶区,碳元素质量分数沿拉坯方向的波动程度与二次枝晶间距之间均有一致的对应关系,即后者越小,前者也越小.

参考文献

[1] 孙勇 .铌对中高碳钢组织及性能的影响[D].内蒙古科技大学,2015.
[2] V. Ludlow;A. Normanton;A. Anderson.Strategy to minimise central segregation in high carbon steel grades during billet casting[J].Ironmaking & Steelmaking: Products and applications,20051(1):68-74.
[3] K.-H. Tacke.Cavity sequences in continuously cast billets: Part II. Stochastic models[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,19994(4):763-772.
[4] S. K. CHOUDHARY;Suvankar GANGULY.Morphology and Segregation in Continuously Cast High Carbon Steel Billets[J].ISIJ International,200712(12):1759-1766.
[5] ZIBING HOU;GUOGUANG CHENG;CHENGCHUAN WU.Time-Series Analysis Technologies Applied to the Study of Carbon Element Distribution Along Casting Direction in Continuous-Casting Billet[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,20126(6):1517-1529.
[6] Hou, Zibing;Wen, Guanghua;Tang, Ping;Cheng, Guoguang.Periodicity of Carbon Element Distribution Along Casting Direction in Continuous-Casting Billet by Using Singular Spectrum Analysis[J].Metallurgical and Materials Transactions, B. Process Metallurgy and Materials Processing Science,20145(5):1817-1826.
[7] Mikio SUZUKI;Makoto SUZUKI;Masayuki NAKADA.Perspectives of Research on High-speed Conventional Slab Continuous Casting of Carbon Steels[J].ISIJ International,20017(7):670-682.
[8] Flemings M.C.;.Our Understanding of Macrosegregation: Past and Present[J].ISIJ International,20009(9):833-841.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%