实体膨胀管技术作为一项先进的钻井技术,其技术优势在套损修复、固井、完井等领域逐渐显露出来.管材的设计研发是实体膨胀管3大关键技术之一,也是制约膨胀管应用的主要技术瓶颈.介绍了实体膨胀管的技术原理,综述了国内外实体膨胀管管材的研发现状,重点分析了实体膨胀管管材所需的力学性能.在此基础之上,着重介绍了现有的双相钢、TRIP-assisted钢以及高锰奥氏体TWIP/TRIP钢3种高塑性高强度钢铁材料的力学性能特点、材料设计原理及热处理工艺,对它们作为实体膨胀管管材使用的可行性进行了讨论.
参考文献
| [1] | Grant T.The evolution of solid expandable tubular technology:lessons learned over five years[A].Houston:OTC,2005:1. |
| [2] | G. NOEL .The Development and Applications of Solid Expandable Tubular Technology[J].The journal of Canadian petroleum technology,2005(12):12-15. |
| [3] | Felix I K.Solid expandable tubulars enable practical well re-entry fields[A].Houston:OTC,2007:1. |
| [4] | Noort R V.Using solid expandable tubulars for openhole water shutoff[A].USA:SPE,2002:1. |
| [5] | Kenneth K.Solid expandable tubular technology:a year of case histories in the drilling environment[A].Amsterdam:SPE/IADC,2001:1. |
| [6] | 张建兵 .油气井膨胀管技术机理分析[D].南充:西南石油学院,2003. |
| [7] | 许瑞萍 .可膨胀管材料的研究与开发[D].天津大学,2006. |
| [8] | 亿万奇环球技术公司 .一种低碳钢膨胀管[P].中国,200580034686.5,2008-11-12. |
| [9] | 新日本制铁株式会社 .扩管后韧性优良的膨胀管用油井管及其制造方法[P].中国,200680020619,2008-06-04. |
| [10] | United States Steel Corporation .Solid expandable tubular members formed from very low carbon steel and method[P].US,7621323,2009-11-24. |
| [11] | 李鹤林.油井管发展动向及高性能油井管国产化[A].北京:石油工业出版社,2007:4. |
| [12] | 李鹤林.中国石油钢管的发展前景展望[A].北京:石油工业出版社,2006:42. |
| [13] | 唐明,宁学涛,吴柳根,马建忠.膨胀套管技术在侧钻井完井工程的应用研究[J].石油矿场机械,2009(04):64-68. |
| [14] | 闫建聚,王恩成,王维星,李在训,胡辉.膨胀管补贴工艺在文留油田的应用[J].石油机械,2010(03):67-68,74. |
| [15] | 徐丙贵,贾涛,黄翠英,吕明杰.膨胀管技术在钻井过程中的研究与应用[J].石油机械,2013(04):11-15. |
| [16] | 高向前,李益良,李涛,张立新,陈强,韩伟业,吴萌.侧钻水平井膨胀套管完井新技术[J].石油机械,2010(01):18-19,34. |
| [17] | 王茂棠.油气干线用钢管质量指标确定方法[J].油气储运,1997(10):6. |
| [18] | 潘佳华 .关于管材的包申格效用[J].焊管,1997,20(1):1. |
| [19] | 马鸣图;吴宝榕.双相钢--物理和力学冶金[M].北京:冶金工业出版社,1998 |
| [20] | 梁轩,李俊,彭颖红.水淬工艺对冷轧微合金双相钢力学性能的影响[J].钢铁研究学报,2008(09):46-49. |
| [21] | 周乐育,刘雅政,方圆,张海旺,宋仁伯.Nb对C-Si-Mn-Cr双相钢相变规律、组织和性能的影响[J].钢铁,2008(07):76-80. |
| [22] | 刘文西 .油田完井用膨胀管装置[P].中国,200510122335.1,2006-07-19. |
| [23] | 宋开红 .单一井径大膨胀率膨胀套管用TWIP钢的研究[D].成都:西南石油大学,2011. |
| [24] | 杨立辉 .可膨胀筛管基管用TWIP钢的研制及性能分析[D].成都:西南石油大学,2011. |
| [25] | 北京科技大学 .一种石油天然气开采用N80钢级膨胀管的制备方法[P].中国,201210009855.1[p],2013-05-01. |
| [26] | 北京科技大学 .一种石油天然气开采用P110钢级膨胀管的制备方法[P].中国,201210009845.8,2013-09-11. |
| [27] | 孙智;彭竹琴.现代钢铁材料及其工程应用[M].北京:机械工业出版社,2007 |
| [28] | De Cooman BC .Structure-properties relationship in TRIP steels containing carbide-free bainite[J].Current opinion in solid state & materials science,2004(3/4):285-303. |
| [29] | Jacques P;Girault E;Catlin T et al.Bainite transformation of low carbon Mn-Si TRIP-assisted multiphase steels:influence of silicon content on cementite precipitation and austenite retention[J].Material Science and Engineering,1999,273A/275A:475. |
| [30] | Tomota Y;Tokuda H;Adachi Y et al.Tensile behavior of TRIP-aided multi-phase steels studied by in situ neutron diffraction[J].Acta Materialia,2004,52(20):5737. |
| [31] | Girault E;Jacques P;Ratchev P et al.Study of the temperature dependence of the bainitic transformation rate in a multiphase TRIP-assisted steel[J].Material Science and Engineering,1999,273A/275A:471. |
| [32] | P. J. JACQUES;J. LADRIERE;F. DELANNAY .On the Influence of Interactions between Phases on the Mechanical Stability of Retained Austenite in Transformation-Induced Plasticity Multiphase Steels[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(11):2759-2768. |
| [33] | I.B. Timokhina;P.D. Hodgson;E.V. Pereloma .Effect of Microstructure on the Stability of Retained Austenite in Transformation-Induced-Plasticity Steels[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2004(8):2331-2341. |
| [34] | S. Zaefferer;J. Ohlert;W. Bleck .A study of microstructure, transformation mechanisms and correlation between microstructure and mechanical properties of a low alloyed TRIP steel[J].Acta materialia,2004(9):2765-2778. |
| [35] | Girault E;Mertens A;Jacques P et al.Comparison of the effects of silicon and aluminum on the tensile behaviour of multiphase TRIP-assisted steels[J].Scripta Materialia,2001,44(6):885. |
| [36] | Bouaziz, O.;Allain, S.;Scott, C.P.;Cugy, P.;Barbier, D. .High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships[J].Current opinion in solid state & materials science,2011(4):141-168. |
| [37] | Grassel O.;Frommeyer G.;Meyer LW.;Kruger L. .High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - application[J].International Journal of Plasticity,2000(10/11):1391-1409. |
| [38] | Shiekhelsouk, MN;Favier, V;Inal, K;Cherkaoui, M .Modelling the behaviour of polycrystalline austenitic steel with twinning-induced plasticity effect[J].International Journal of Plasticity,2009(1):105-133. |
| [39] | 黄宝旭 .氮、铌合金化孪生诱发塑性（TWIP）钢的研究[D].上海交通大学,2007. |
| [40] | Chung, K.;Ahn, K.;Yoo, D.-H.;Chung, K.-H.;Seo, M.-H.;Park, S.-H. .Formability of TWIP (twinning induced plasticity) automotive sheets[J].International Journal of Plasticity,2011(1):52-81. |
| [41] | 米振莉;唐荻;代永娟 等.退火温度对25Mn-3Si-3Al-TWIP 钢组织和力学性能的影响[J].北京科技大学学报,2007,29(S2):117. |
| [42] | 刘向海,刘薇,刘嘉斌,舒康颖.孪生诱发塑性（TWIP）钢的研究现状[J].材料导报,2010(11):102-105,111. |
| [43] | 李慎升,米振莉,唐荻,江海涛,代永娟.退火工艺对TWIP钢显微组织的影响[J].热加工工艺,2008(18):64-66. |
| [44] | 王书晗,刘振宇,王国栋,梁高飞.热处理工艺对TWIP钢组织性能的影响[J].东北大学学报（自然科学版）,2008(09):1283-1286. |
| [45] | Singon Kang;Yeon-Seung Jung;Joong-Hwan Jun;Young-Kook Lee .Effects of recrystallization annealing temperature on carbide precipitation,microstructure, and mechanical properties in Fe–18Mn–0.6C–1.5Al TWIP steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(3):745-751. |
| [46] | 易炜发,朱定一,杨泽斌,林淑梅.铜含量对高碳TWIP钢组织和力学性能的影响[J].钢铁,2011(11):71-76. |
| [47] | 戴起勋;火树鹏;陈康敏 .高锰奥氏体钢超低温拉伸形变特性[J].钢铁研究学报,1995,7(3):40. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%