为获得适合FeCrAl不锈钢的液固相线计算公式,采用DSC在不同升温速率下测定了其液固相线,并采用Thermo-Calc软件和经验公式分别计算了液相线.计算结果与DSC试验结果的比较表明特定的经验公式相比Thermo-Calc软件能够更加准确地计算FeCrAl不锈钢的液相线.Scheil模型下的Thermo-Calc凝固计算与DSC实测固相线的比较分析表明固相分率(fs)-温度曲线上fs=0.99对应的温度可以作为FeCrAl不锈钢的固相线.采用上述方法分别计算Fe-Cr-Al三元系和Fe-Cr-Al-X(X=C,Si,Mn)多元系的固相线,分析不同组元对Fe-Cr-Al三元系固相线的影响,最终得到了适合FeCrAl不锈钢的固相线计算公式.
参考文献
| [1] | J.Miettinen;A.A.Howe.Estimation of liquidus temperatures for steels using thermodynamic approach[J].Ironmaking & Steelmaking: Products and applications,20003(3):212-227. |
| [2] | Seiji Miura;Yong-Myong Hong;Tomoo Suzuki.Liquidus and Solidus Temperatures of Ni-Solid Solution in Ni-Al-X (X: V, Nb and Ta) Ternary Systems[J].Journal of Phase Equilibria,20013(3):345-351. |
| [3] | W. Banda;G.A. Georgalli;C. Lang.Liquidus temperature determination of the Fe-Co-Cu system in the Fe-rich corner by thermal analysis[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20081/2(1/2):178-182. |
| [4] | R.I.Wu;J.H.Perepezko.Liquidus temperature determination in multicomponent alloys by thermal analysis[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20002(2):497-501. |
| [5] | 喇培清;撒兴瑞;刘辉;孟倩;魏玉鹏;卢学峰.高铝310S耐热钢板材的焊接性能[J].钢铁研究学报,2014(2):34-40. |
| [6] | 薛攀龙;喇培清;刘辉;孟倩;魏玉鹏.Al对310S耐热钢高温拉伸性能的影响[J].钢铁研究学报,2015(7):46-51. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%