欢迎登录材料期刊网

材料期刊网

高级检索

根据钢铸态热膨胀特性及实际过程中钢的连铸工艺特点,建立基于凝固传热与自由热收缩耦合的自由热收缩有限差分计算模型。利用该模型系统研究了铸坯自由热收缩行为沿铸流上的分布以及不同钢种之间凝固自由热收缩行为。研究表明,铸坯在中心全液相、两相和全凝固阶段表现的自由热收缩行为呈现不同规律;不同钢种的凝固自由热收缩量沿拉坯方向上的分布也相应存在差异。该模型可为制定不同钢种和断面的连铸辊缝控制工艺与轻压下工艺提供理论依据。

Based on the thermal expansion properties of cast steels and continuous casting process condition,the fi-nite difference method for thermal transform and free thermal contraction of slabs was developed for prediction of the thermal field distribution and free thermal contraction behavior.The results show that the free thermal con-traction along the strands has different behaviors in different solidification stages,and the different effects of steel carbon content on the free thermal contraction are also found.A theoretical foundation to the roll gap control tech-nique and soft reduction process for different steel grades and casting cross sections can be provided.

参考文献

[1] 王羽翀;王庆娟;徐李军;仇圣桃.轻压下技术在板坯连铸生产中的应用现状[J].钢铁研究学报,2012(3):1-6,43.
[2] 孙群;任子平;姜茂发.管线钢连铸轻压下工艺的研究[J].钢铁研究学报,2010(4):1-4,19.
[3] 陈素琼;张家泉;崔立新;干勇;倪满森.板坯凝固末端轻压下实时控制的热-力学分析[J].钢铁研究学报,2003(2):9-13,18.
[4] Masafumi ZEZE;Hideyuki MISUMI;Shuji NAGATA.Segregation Behavior and Deformation Behavior during Soft-reduction of Unsolidified Steel Ingot[J].鉄と鋼,20012(2):71-76.
[5] Ralph Nystrom;Karl-Heinz Spitzer.Development of Soft Reduction at Inexa Profil for the Possibility of Increased Productivity with Maintained or Improved Product Quality[J].Steel Research International,200311/12(11/12):700-707.
[6] 钱宏智;兰鹏;张家泉;崔立新.非平衡凝固对铸坯末端两相区长度的影响[J].特殊钢,2010(2):25-28.
[7] Hideo MIZUKAMI;Akihiro YAMANAKA;Tadao WATANABE.Prediction of Density of Carbon Steels[J].ISIJ International,20024(4):375-384.
[8] Hideo Mizukami;Yoshihisa Shirai.Prediction of Density of Stainless Steel[J].ISIJ International,200010(10):987-994.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%